Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Seagate ST3250620NS ATA Error Count: 1229 - przejmować się?

n0rbi 19 Maj 2008 11:35 2190 0
  • #1 19 Maj 2008 11:35
    n0rbi
    Poziom 12  

    Witam !
    Mam dysk Seagate ST3250620NS (dysk pewnie ma już z 2-3 miesiące), i ostatnio sprawdziłem S.M.A.R.T. - i zaniepokoiły mnie właśnie ATA Error count

    Code:
    === START OF INFORMATION SECTION ===
    
    Model Family:     Seagate Barracuda ES
    Device Model:     ST3250620NS
    Serial Number:    9QE52KYA
    Firmware Version: 3.AEE
    User Capacity:    250,058,268,160 bytes
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   7
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Mon May 19 11:28:07 2008 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status:  (0x82)   Offline data collection activity
                   was completed without error.
                   Auto Offline Data Collection: Enabled.
    Self-test execution status:      (   0)   The previous self-test routine completed
                   without error or no self-test has ever
                   been run.
    Total time to complete Offline
    data collection:        ( 430) seconds.
    Offline data collection
    capabilities:           (0x5b) SMART execute Offline immediate.
                   Auto Offline data collection on/off support.
                   Suspend Offline collection upon new
                   command.
                   Offline surface scan supported.
                   Self-test supported.
                   No Conveyance Self-test supported.
                   Selective Self-test supported.
    SMART capabilities:            (0x0003)   Saves SMART data before entering
                   power-saving mode.
                   Supports SMART auto save timer.




    Error logging capability:        (0x01)   Error logging supported.
                   General Purpose Logging supported.
    Short self-test routine
    recommended polling time:     (   1) minutes.
    Extended self-test routine
    recommended polling time:     (  92) minutes.
    SCT capabilities:           (0x003d)   SCT Status supported.
                   SCT Feature Control supported.
                   SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   117   091   006    Pre-fail  Always       -       130761998
      3 Spin_Up_Time            0x0003   091   090   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       382
      5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       40126306
      9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1456
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       385
    187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    190 Airflow_Temperature_Cel 0x0022   055   048   045    Old_age   Always       -       45 (Lifetime Min/Max 30/45)
    194 Temperature_Celsius     0x0022   045   052   000    Old_age   Always       -       45 (0 25 0 0)
    195 Hardware_ECC_Recovered  0x001a   066   053   000    Old_age   Always       -       40841070
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
    202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

    SMART Error Log Version: 1
    ATA Error Count: 1229 (device log contains only the most recent five errors)
       CR = Command Register [HEX]
       FR = Features Register [HEX]
       SC = Sector Count Register [HEX]
       SN = Sector Number Register [HEX]
       CL = Cylinder Low Register [HEX]
       CH = Cylinder High Register [HEX]
       DH = Device/Head Register [HEX]
       DC = Device Command Register [HEX]
       ER = Error register [HEX]
       ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 1229 occurred at disk power-on lifetime: 1456 hours (60 days + 16 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      10 51 01 2e 51 1c ed

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      37 ff 01 2e 51 1c ed 00      01:11:08.530  SET MAX ADDRESS EXT
      27 ff 00 2e 51 1c e0 00      01:11:08.314  READ NATIVE MAX ADDRESS EXT
      37 ff 00 2e 51 1c ed 00      01:11:08.249  SET MAX ADDRESS EXT
      27 ff 01 2e 51 1c e0 00      01:11:06.169  READ NATIVE MAX ADDRESS EXT
      37 ff 01 2e 51 1c ed 00      01:11:06.110  SET MAX ADDRESS EXT

    Error 1228 occurred at disk power-on lifetime: 1456 hours (60 days + 16 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      10 51 01 2e 51 1c ed

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      37 ff 01 2e 51 1c ed 00      01:11:02.623  SET MAX ADDRESS EXT
      27 ff 00 2e 51 1c e0 00      01:11:02.623  READ NATIVE MAX ADDRESS EXT
      37 ff 00 2e 51 1c ed 00      01:11:02.623  SET MAX ADDRESS EXT
      27 ff 01 6f 59 1c e0 00      01:11:06.169  READ NATIVE MAX ADDRESS EXT
      29 00 01 6f 59 1c e0 00      01:11:06.110  READ MULTIPLE EXT

    Error 1227 occurred at disk power-on lifetime: 1446 hours (60 days + 6 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      10 51 01 2e 51 1c ed

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      37 ff 01 2e 51 1c ed 00      04:46:31.064  SET MAX ADDRESS EXT
      27 ff 00 2e 51 1c e0 00      04:46:30.999  READ NATIVE MAX ADDRESS EXT
      37 ff 00 2e 51 1c ed 00      04:46:28.919  SET MAX ADDRESS EXT
      27 ff 01 2e 51 1c e0 00      04:46:28.860  READ NATIVE MAX ADDRESS EXT
      37 ff 01 2e 51 1c ed 00      04:46:28.644  SET MAX ADDRESS EXT

    Error 1226 occurred at disk power-on lifetime: 1446 hours (60 days + 6 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      10 51 01 2e 51 1c ed

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      37 ff 01 2e 51 1c ed 00      04:46:25.375  SET MAX ADDRESS EXT
      27 ff 00 2e 51 1c e0 00      04:46:25.374  READ NATIVE MAX ADDRESS EXT
      37 ff 00 2e 51 1c ed 00      04:46:28.919  SET MAX ADDRESS EXT
      27 ff 01 6f 59 1c e0 00      04:46:28.860  READ NATIVE MAX ADDRESS EXT
      29 00 01 6f 59 1c e0 00      04:46:28.644  READ MULTIPLE EXT

    Error 1225 occurred at disk power-on lifetime: 1433 hours (59 days + 17 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      10 51 01 2e 51 1c ed

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      37 ff 01 2e 51 1c ed 00      06:26:26.662  SET MAX ADDRESS EXT
      27 ff 00 2e 51 1c e0 00      06:26:26.598  READ NATIVE MAX ADDRESS EXT
      37 ff 00 2e 51 1c ed 00      06:26:24.518  SET MAX ADDRESS EXT
      27 ff 01 2e 51 1c e0 00      06:26:24.459  READ NATIVE MAX ADDRESS EXT
      37 ff 01 2e 51 1c ed 00      06:26:24.243  SET MAX ADDRESS EXT

    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Conveyance offline  Completed without error       00%      1456         -
    # 2  Extended offline    Completed without error       00%      1451         -
    # 3  Short offline       Completed without error       00%      1449         -
    # 4  Extended offline    Completed without error       00%        78         -
    # 5  Short offline       Completed without error       00%        75         -

    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    Parametry S.M.A.R.T. chyba są OK (taką mam nadzieję), testy przechodzą bez problemu - więc skąd te błędy? (I to jeszcze dzisiaj pojawiły się ostatnie dwa ...) Może mieć na to wpływ tasiemka SATA ?
    No i czy warto się tym przejmować i szukać przyczyny, czy przymknąć na to oko ?
    Dodam, że dysk z reguły zachowuje się normalnie - ale dwa razy coś mu odbiło, i w Linuxie, podczas normalnej pracy, wyskoczył mi błąd input/output error - i trzeba było wyłączyć kompa, włączyć i naprawić system plików, bo się sypnął ...

    0 0