logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Szukam namiaru na program(reset ip90)

kenshinx 05 Sie 2008 13:36 5359 4
REKLAMA
  • #1 5409931
    kenshinx
    Poziom 11  
    Jeśli jest to możliwe, proszę o namiar na program do kasowania licznika "pampersa" drukarki ip 90(canon pixma). Mogą być też instrukcje jak skasować pampersa stosując kombinacje klawiszowe(power, resume).
    Dziękuję z góry. Pozdrawiam serdecznie.
  • REKLAMA
  • #2 5411084
    leeart

    Poziom 35  
    kasowanie pochłaniaczy tylko z"palca"
  • REKLAMA
  • #3 5412844
    kenshinx
    Poziom 11  
    Do drukarek ip1500 i i350 istnieją takowe programy do resetowania liczników pampersa(serwis canon'a w Krakowie nie wie o jakie programy chodzi :D), dlatego zapytałem. Jeżeli ktoś zna "klawiszowy" sposób to proszę o pomoc jak to zrobić w ip90. Pozdrawiam

    Edit:

    Rozwiązanie(czyli to najprostsze :D):

    http://www.fixya.com/support/r435500-ink_absorber_full



    Cytat:
    1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

    2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with o
    4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
    5) Press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
    6) Power off then back on and test.


    Pozdrawiam.
  • REKLAMA
  • #4 7130738
    petrus21
    Poziom 11  
    CZy do tej pory nikt nie jest w stanie rozwiązać problemu za wyjątkiem kosztownego servisu canona?
    Proszę o pomoc.
  • #5 12524026
    pcnet

    Poziom 32  
    Przecież masz instrukcję powyżej.
REKLAMA