Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

SAMSUNG_HD160JJ- dziwne uszkodzenie

januszsz0 07 Lut 2009 14:51 1251 1
  • #1 07 Lut 2009 14:51
    januszsz0
    Poziom 1  

    Witam
    Dysk podłączony do komputera.Przy startowaniu z płytki np;BartPe-blue screen
    Płytka PartedMagic załaduje się,da się sformatować,
    Przy próbie zainstalowania Windowsa sformatuje się i po restarcie
    występuje -błąd dysku.Można na niego zapisywać i kopiować dane
    Podaję log uzyskany za pomocą PartedMagic:

    smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
    Home page is http://smartmontools.sourceforge.net/

    === START OF INFORMATION SECTION ===
    Model Family: SAMSUNG SpinPoint P80 SD series
    Device Model: SAMSUNG HD160JJ
    Serial Number: S08HJ1FL604198
    Firmware Version: ZM100-41
    User Capacity: 160,040,803,840 bytes
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 7
    ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
    Local Time is: Wed Feb 4 15:00:11 2009 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x02) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: (3677) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 61) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 4608




    4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1824
    5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6394
    10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
    11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1369
    187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 200370
    190 Airflow_Temperature_Cel 0x0022 145 118 000 Old_age Always - 31
    194 Temperature_Celsius 0x0022 145 118 000 Old_age Always - 31
    195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 46856
    196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
    198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
    201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
    202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0

    SMART Error Log Version: 1
    ATA Error Count: 164 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 164 occurred at disk power-on lifetime: 6394 hours (266 days + 10 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 02 ad 3e 0d e3 Error: UNC 2 sectors at LBA = 0x030d3ead = 51199661

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 02 ad 3e 0d e3 00 00:16:49.375 READ DMA
    ec 00 00 00 00 00 a0 00 00:16:47.625 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:16:47.625 SET FEATURES [Set transfer mode]
    ec 00 00 00 00 00 a0 00 00:16:47.625 IDENTIFY DEVICE

    Error 163 occurred at disk power-on lifetime: 6394 hours (266 days + 10 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 02 ad 3e 0d e3 Error: UNC 2 sectors at LBA = 0x030d3ead = 51199661

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 02 ad 3e 0d e3 00 00:16:47.500 READ DMA
    ec 00 00 00 00 00 a0 00 00:16:45.813 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:16:45.750 SET FEATURES [Set transfer mode]
    ec 00 00 00 00 00 a0 00 00:16:45.750 IDENTIFY DEVICE

    Error 162 occurred at disk power-on lifetime: 6394 hours (266 days + 10 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 02 ad 3e 0d e3 Error: UNC 2 sectors at LBA = 0x030d3ead = 51199661

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 02 ad 3e 0d e3 00 00:16:45.688 READ DMA
    ec 00 00 00 00 00 a0 00 00:16:43.938 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:16:43.938 SET FEATURES [Set transfer mode]
    ec 00 00 00 00 00 a0 00 00:16:43.875 IDENTIFY DEVICE

    Error 161 occurred at disk power-on lifetime: 6394 hours (266 days + 10 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 02 ad 3e 0d e3 Error: UNC 2 sectors at LBA = 0x030d3ead = 51199661

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 02 ad 3e 0d e3 00 00:16:43.813 READ DMA
    ec 00 00 00 00 00 a0 00 00:16:42.125 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:16:42.063 SET FEATURES [Set transfer mode]
    ec 00 00 00 00 00 a0 00 00:16:42.063 IDENTIFY DEVICE

    Error 160 occurred at disk power-on lifetime: 6394 hours (266 days + 10 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 02 ad 3e 0d e3 Error: UNC 2 sectors at LBA = 0x030d3ead = 51199661

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    c8 00 02 ad 3e 0d e3 00 00:16:41.938 READ DMA
    ec 00 00 00 00 00 a0 00 00:16:40.250 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:16:40.250 SET FEATURES [Set transfer mode]
    ec 00 00 00 00 00 a0 00 00:16:40.188 IDENTIFY DEVICE

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed: read failure 90% 6394 90840878

    SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
    SMART Selective self-test log data structure revision number 0
    Warning: ATA Specification requires selective self-test log data structure revision number = 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    Proszę o pomoc w odczycie, bo ja z racji wieku jestem już
    nieedukowalny,a moja znajomośc angielskiego jest raczej zerowa
    Pozdrawiam

    0 1
  • #2 07 Lut 2009 14:59
    mat_ed
    Poziom 43  

    Dysk ma bad sektory. Bardzo prawdopodobne,że to właśnie przez te bad sektory występuje problem z instalacją systemu. Przydałby się jeszcze wynik skanowania w MHDD 2x F4 - opis programu w podwieszonym temacie HDD FAQ -> https://www.elektroda.pl/rtvforum/topic868490.html

    0