MODEL YEAR(S)
CAMRY 2005 -2006
12volts white/red (30A), white (5A) + ignition harness
Starter black/white + ignition harness
Ignition black/red + ignition harness
Power Lock blue/yellow - DKP or bottom of fusebox, 20 pin plg
Notes: Meter this wire while turning the key in the driver door key cylinder.
Power Unlock blue (double pulse) - DKP or BECU, top plug, pin 22
Notes: Meter this wire while turning the key in the driver door key cylinder.
Can also use the passenger door key cylinder unlock wire, which only requires a single pulse. It is blue/white (-) in the BECU, top plug, pin 21.
Turn Signal(L) green/white + turn signal flasher relay in DKP
Turn Signal(R) green/yellow + turn signal flasher relay in DKP
Door Trigger : The LF door is red/green in the BECU, bottom plug, pin 1. The RF door is red/green in the BECU, top plug, pin 11. The rear doors are red/white in the bottom of the fuse box, 20 pin plug, pin 7. Use all three wires and diode isolate each.
The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.