Elektroda.pl
Elektroda.pl
X
Elektroda.pl
MetalWork SafetyMetalWork Safety
Please add exception to AdBlock for elektroda.pl.
If you watch the ads, you support portal and users.

Martech Team Nowosci - aktualizacje i opisy

Tech mobil 12 May 2011 21:18 368332 505
  • #301
    Tech mobil

    GSM Product Supporter
    Rcd Tools 0.0.4.12 - Renault & Citroen SN calcs

    Latest Update :
    - Citroen ver1 by Blaupunkt - general calculator
    - Citroen ver2 by Blaupunkt - general calculator
    - Citroen ver3 by Blaupunkt - general calculator
    - Renault by Blaupunkt - general calculator

    and few radios:

    - Chorus M4, 7 648 245 380, 4B0 035 152B, AUZ1Z2, hc705b32 by Blaupunkt
    - Honda, 2TC0 MF721A0, 39101-S5P-A510-M1, 24c04 by Alpine
    - Mercedes-Benz, AL2197, A 170 820 00 86, 24c02 by Alpine
    - Skoda, Stream CD MP3, 1Z0 035 161C, SKZ7Z2J, hc9s12 by Visteon
    - Skoda, Stream CD MP3, 5J0 035 161, SK7Z2I, hc9s12 by Visteon
    - VW, Beta 4, 9.18254-83, 1HO 035 152, VWZ2Z2, hc11e9 by Grundig
    - VW, Premium 5, 1J0 035 180B, VWZ4Z7, 24c04 by Delco
    - VW, Premium 5, 1JM 035 157A, VWZ4Z7, 24c04 by Delco

    Get autoupdate - run rcd2.exe or download and use installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • MetalWork SafetyMetalWork Safety
  • #302
    Tech mobil

    GSM Product Supporter
    RCD PRO 0.4.1.12 - ST92 is READY !

    Again new microcontrollers were added to PRO application :)
    This time, we are happy to support:[/b]

    - ST92F120JV1, ST92F120JV9
    - ST92F120V1, ST92F120V9
    - ST92F124R9, ST92F124V1
    - ST92F150CR1, ST92F150CR9
    - ST92F150CV1, ST92F150CV9
    - ST92F150JDV1
    - ST92F250CV2


    Possible operatons:
    - Read, Erase, Write & Verify

    Possible areas to work:
    - full (flash, eeprom, OTP)
    - flash (so called firmware)
    - eeprom
    - OTP area (read only, due of security reasons)


    Direct connections from Port2 to target board, connection schematic is build in tool.
    HC(7)05, HC(7)11 were added into rcdpro.exe too !

    Every pinout is displayed on Clip LCD, did you saw it?

    We are waiting for working feedbacks, tool will be optimalized for users demands.
    Get autoupdate - run rcdpro.exe or download and use installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards

    Martech Team
  • #303
    Tech mobil

    GSM Product Supporter
    SPI Tool V1.2

    New functions in tool (options to read and edit system register in EEPROM SPI):
    - Read Status Register
    - Protect EEPROM Area
    - Unprotect EEPROM Area

    Download; http://martech.pl/support/Clip%20application/spi_tool.prg


    Martech Team
    www.martech.pl

    Dodano po 1 [godziny] 3 [minuty]:

    RCDPRO RNS315 V1.2 - models from 2011 supported
    2011-05-16


    Martech Team Nowosci - aktualizacje i opisy

    RCDPRO RNS315 V1.2 - new way of decoding



    Zmiany w nowej wersji:
    - obsługa najnowszych wersji sprzętowych serii RNS315
    - zmiana algotytmu wyznaczania kodu w Slow Mode
    - przyspieszenie procesu Slow Mode
    - uproszczenie połaczeń Expander<->RNS315 w funkcji Slow Mode
    - więcej informacji w sekcji RCD PRO - Support



    RCDPRO RNS315 V1.2 - new way of decoding

    Changes in current version:
    - supports the latest hardware reviosions of RNS315 series
    - new algorithm for reading code in Slow Mode
    - accelerate the Slow Mode process
    - simplify connections Expander <-> RNS315 (in Slow Mode)
    - more details in RCD PRO - Support section



    Special thanks goes to all users involved in this update, including Artoo.
    Martech Team
    www.martech.plMartech Team Nowosci - aktualizacje i opisy
  • MetalWork SafetyMetalWork Safety
  • #304
    Tech mobil

    GSM Product Supporter
    Rcd Tools 0.0.4.14 - Delco SN calc

    Latest Update :
    - CDR500 & CDR2005 by Delco SN calc
    (simply enter GM1500.. or GM0205.. and get original code)


    Get autoupdate - run rcd2.exe or download and use installer:
    http://martech.pl/support/setup_rcdx.exe


    Best Regards

    Martech Team
  • #305
    Tech mobil

    GSM Product Supporter

    Security Repairer 0.0.4.14 - Porsche CDR23 "protect"


    Today we bring solution for "protect" on popular radios from Porsche cars.
    "Protect" on radio lcd is now history..

    Martech Team Nowosci - aktualizacje i opisy

    Credits go to Mark @ AC & Auto Electrical Services for supplying units.
    Supported:

    - Porsche, CDR23, BE6611, 24c16
    - Porsche, CDR23, BE6612, 24c16
    - Porsche, CDR23, BE6623, 24c16
    - Porsche, CDR23, BE6627, 24c16

    Other models which has been added:

    - BMW, Business 22DC795/23Z, PH7950, 65.12-6 902 659, 24c16
    - fixed "Unregister" button action for CD30, CD60, DVD100 (Grundgi), CD70(Siemens/VDO)


    Get autoupdate - run sec.exe or download and use installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • #306
    Tech mobil

    GSM Product Supporter
    RCD PRO Tools V0.0.4.15 - new Kenwoods..

    Latest Update :

    - KDC-DDX8017, 24c08 by Kenwood
    - KDC-DDX8022BT, 24lc08 by Kenwood
    - KDC-W4534, KE1204, Y21-5852-72, 24c04 by Kenwood
    - XNV-L66BT, Sony, 24lc08 by Sony


    Martech Team Nowosci - aktualizacje i opisy


    as always - run rcdpro.exe to get autoupdate or download installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • #307
    Tech mobil

    GSM Product Supporter
    Rcd Tools 0.0.5.0 - major changes in Clip bootloader

    Actual version will update your Clip bootloader and firmware, your device
    will work more stable and will be prepared for more future updates.


    After getting update (autoupdate by running rcd2.exe or using installer) wait until process of calibration and update will finish. You will see all buttons enabled, then go to Box Info bookmark, check if all is ok and then click on Find Device. Rcd2.exe will update one more, at the end you must see :

    Device : Martech CLIP.
    Boot Ver : 2,03.
    Firmware : 02.00.02.03.

    and that's all, process is finished.

    New models which has been added:

    - Audi, Concert EU AB2, AUZ1Z3G, 7 647 253 380, 95128 by Blaupunkt
    - Nissan, PP-3001N, 24c64 by Clarion
    - Mercedes-Benz, Sound 30, BE-6052, 24c04 by Becker


    Get autoupdate - run rcd2.exe or download and use installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • #308
    Tech mobil

    GSM Product Supporter
    Security Repairer V0.0.5.0 - more canchecks..

    Latest Update :
    - Fiat 2250 MP3 TE SB05, BP7301, 7 646 301 316, 95320
    - Fiat D225 MP3 TE SB05, BP8290, 7 648 290 316, 25320
    - Fiat 199 CD MP3 MY (lack.), BP7386, 7 647 386 316, 95320
    - Mercedes-Benz Audio 7 PDE, BE7078, 24c08 by Becker (Prod)


    As always - run sec.exe or download installer from:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • #309
    Tech mobil

    GSM Product Supporter
    Rcdpro Tools V0.0.5.0 - RNS 810 supported!

    Latest Update :

    - VW, RNS 810, VWZ6Z7, all versions, 3D0 035 680 by Continental

    Available functions :

    - change pin code, activate TV-Free aka Video in motion, service commands (depends on versions)


    Martech Team Nowosci - aktualizacje i opisy

    Run rcdpro.exe to get autoupdate or download installer:
    http://martech.pl/support/setup_rcdx.exe

    Best Regards
    Martech Team
  • #310
    Tech mobil

    GSM Product Supporter
    RCDPRO Tools V0.0.5.3 - M16 & M32 Renesas programmer

    We are proud to present new programmer over Clip and RCD PRO.
    With this release you are able to read, write, verify over 222 various chips from Renesas.

    Moreover, you are able to read original code from RCD 210 within few seconds (so we don't need expander at all anymore for decoding).

    Other famous model which is supported in tool for fast code reading is RCD 500.
    (both Panasonic units)

    Having this update you can:
    - repair dead units
    - change fm frequency
    - convert various units and models from USA to EU etc.


    Connection pinout is build in programmer bookmar and visible on Clip lcd after choosing exact chip also.
    Connection to target board is visible as link after choosing exact radio model:

    - VW, RCD 210 MP3, CQ-JV1871G, 1K0 035 156B, VWZ5Z1, M30879FLFP by Panasonic
    - VW, RCD 210, CQ-JV1872G, 1K0 035 156B, VWZ5Z1, M30879FLFP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1571G, 3C0 035 195A, VWZ5Z7, M30833FJGP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1572G, 3C0 035 195B, VWZ5Z7, M30833FJGP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1573G, 3C0 035 195C, VWZ5Z7, M30833FJGP by Panasonic


    Update: free, run rcdpro.exe for selfupdate.

    Best Regards
    Martech Team

    ps. If someone would ask, here's supported chips list:

    M301N2F8TFP
    M30201F6FP, M30201F6SP, M30201F6TFP, M30201F6TSP, M30218FCFP

    M30220FCGP
    M30245FCGP
    M30260F3AGP, M30260F3TGP, M30260F3VGP, M30260F4AGP, M30260F4TGP, M30260F4VGP
    M30260F6AGP, M30260F6TGP, M30260F6VGP, M30260F8AGP, M30260F8TGP, M30260F8VGP
    M30262F3GP, M30262F4GP, M30262F6GP, M30262F8GP, M30263F3AFP, M30263F4AFP, M30263F6AFP
    M30263F8AFP,

    M30280F6HP, M30280F6THP, M30280F6VHP, M30280F8HP, M30280F8THP, M30280F8VHP, M30280FAHP
    M30280FATHP, M30280FAVHP, M30280FCBHP, M30280FCHP, M30281F6HP, M30281F6THP, M30281F6VHP
    M30281F8HP, M30281F8THP, M30281F8VHP, M30281FAHP, M30281FATHP, M30281FAVHP, M30281FCBHP
    M30281FCHP,

    M30290F8HP, M30290F8THP, M30290F8VHP, M30290FAHP, M30290FATHP, M30290FAVHP
    M30290FCHP, M30290FCTHP, M30290FCVHP, M30291F8HP, M30291F8THP, M30291F8VHP
    M30291FAHP, M30291FATHP, M30291FAVHP, M30291FCHP, M30291FCTHP, M30291FCVHP

    M30620FCAFP, M30620FCAGP, M30620FCMFP, M30620FCMGP, M30620FCNFP, M30620FCNGP
    M30620FCPFP, M30620FCPGP, M30620FCTFP

    M30621FCAGP, M30621FCMGP, M30621FCNGP, M30621FCTGP

    M30622F8PFP, M30622F8PGP

    M30624FGAFP, M30624FGAGP, M30624FGFP, M30624FGGP, M30624FGLFP, M30624FGLGP
    M30624FGMFP, M30624FGMGP, M30624FGNFP, M30624FGNGP, M30624FGPFP, M30624FGPGP

    M30625FGAGP, M30625FGGP, M30625FGLGP, M30625FGMGP, M30625FGNGP

    M30626FHPFP, M30626FHPGP, M30626FJPFP, M30626FJPGP, M30627FHPGP, M30627FJPGP
    M3062GF8NFP, M3062GF8NGP, M3062LFGPFP, M3062LFGPGP, M3062MF8NGP
    M306N0FCFP, M306N0FGFP, M306N1FCFP
    M306N4FCTFP, M306N4FCVFP, M306N4FGTFP, M306N4FGVFP, M306N5FCFP, M306N5FCGP, M306N5FCTFP, M306N5FCTGP, M306N5FCVFP,
    M306N5FCVGP, M306NAFGTFP, M306NAFGVFP, M306NBFCTFP, M306NBFCVFP, M306NKFHGP, M306NKFJTGP, M306NLFHGP, M306NLFJGP
    M306S0AGP, M306V7FGFP
    M30800FCFP, M30800FCGP
    M30802FCGP, M30803FGFP, M30803FGGP, M30805FGGP, M30833FJFP, M30833FJGP, M30835FJGP

    M30843FHFP, M30843FHGP, M30843FHTGP, M30843FJFP, M30843FJGP, M30843FJTGP, M30843FWFP, M30843FWGP, M30843FWTGP
    M30845FHGP, M30845FHTGP, M30845FJGP, M30845FJTGP, M30845FWGP, M30845FWTGP

    M30853FHFP, M30853FHGP, M30853FHTGP
    M30853FJFP, M30853FJGP, M30853FJTGP, M30853FWFP, M30853FWGP, M30853FWTGP
    M30855FHGP, M30855FHTGP, M30855FJGP, M30855FJTGP, M30855FWGP, M30855FWTGP

    M30863FJGP, M30865FJGP, M30865FJTGP

    M30873FHGP, M30875FHGP, M30876FJGP, M30878FJGP

    M30879FKGP, M30879FLFP, M30879FLGP, M3087BFKGP, M3087BFLGP

    M30880FHTGP, M30880FJTGP, M30880FWTGP

    M30882FHTGP, M30882FJTGP, M30882FWTGP

    M30953FJTGP, M30955FJTP

    M37542F8FP, M37641F8FP, M37641F8HP

    M37906F8CFP, M37906F8CSP

    M38039FFFP, M38039FFHFP, M38039FFHHP, M38039FFHKP, M38039FFHP, M38039FFHSP
    M38039FFLHP, M38039FFLKP, M38039FFLSP, M38039FFLWG, M38039FFSP, M38039G6H, M38039GCH

    M38049FFFP, M38049FFHFP, M38049FFHP, M38049FFHSP, M38049FFSP

    M38507F8FP, M38869FFAHP

    M38C29FFFP, M38C29FFHP, M38K29F8FP, M38K29F8HP




    Martech TEAM

    www.martech.pl
  • #311
    Tech mobil

    GSM Product Supporter
    RCDPRO Tools V0.0.5.5 - Chrysler navigations

    Latest Update :

    Programmer - ST92f section :
    - new boot for reading eeprom area (mainly for F120..)
    - do not connect backlight signal to the radio power supply while programming function


    Navigations:
    - Chrysler, P05064055AK RET 6CD/DVD, 24c16 by Alpine
    - Chrysler, P05091508AH REJ NAV MP3 6CD DVD, 24c256 by Alpine


    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy

    Run rcdpro.exe to get auto update.. as ordinary.

    Best Regards
    Martech Team
    www.martech.pl
  • #312
    Tech mobil

    GSM Product Supporter
    Rcd2 Tools V0.0.5.5 - mc9s12 fixes

    Latest Update:

    - fixes on reading MC9s12DG256B
    - fixes on 9s12 algos for reading code on shifted eeproms
    - new model in support: Skoda, Stream CD MP3, 1Z0 035 161A, SKZ7Z7Z, hc9s12 by Visteon


    As ordinary.. run rcd2.exe to get autoupdate or use installer from:
    http://martech.pl/support

    Check out our new web shop at:
    http://shop.martech.pl

    Martech Team

    www.martech.pl
  • #313
    Tech mobil

    GSM Product Supporter
    RCD Tools V0.0.5.6 - units based on HC705B32 in tool.

    This time we prepared fast direct connections for units based on HC705B32/HC05B8 cpus.
    Select model and check description area for connection pinout.

    New models supported in tool:

    - Audi, Chorus A3, 7 640 251 380, hc705b32 by Blaupunkt
    - Audi, Chorus A8, 7 647 243 380, hc705b32 by Blaupunkt
    - Audi, Chorus A8, 7 648 243 380, hc705b32 by Blaupunkt
    - Audi, Chorus, 7 646 243 380, 4B0 035 152, AUZ1Z2, hc705b32 by Blaupunkt
    - Audi, Chorus, 7 647 245 380, 4B0 035 152A, AUZ1Z2, hc705b32 by Blaupunkt
    - Audi, Concert A8, 7 647 248 380, 4D0 035 186A, hc705b32 by Blaupunkt
    - Audi, Concert A8, 7 648 248 380, hc705b32 by Blaupunkt
    - Audi, Concert M4, 7 648 247 380, 4B0 035 186C, AUZ1Z3, hc705b32 by Blaupunkt
    - Audi, Concert NAV, 7 647 249 380, 4B0 035 186B, AUZ1Z3, hc05b32 by Blaupunkt
    - Audi, Concert NAV, 7 647 249 380, 4B0 035 186B, AUZ1Z3, hc705b32 by Blaupunkt
    - Audi, Concert, 7 646 248 380, 4B0 035 186, AUZ1Z3, hc705b32 by Blaupunkt
    - Seat, SE 359 LHD S ONA BVX, SEZ1Z3E, 7 645 606 366, P51 035 152 47V, 95320 by Blaupunkt
    - VW, Beta CC, 7 643 846 060, 1H0 035 152, VWZ1Z2, hc05b8 by Blaupunkt


    Update: run rcd2.exe to get autoupdate.

    Best Regards
    Martech Team
    www.martech.pl
  • #314
    Tech mobil

    GSM Product Supporter
    Ford V - TMS470 Decoder

    Naszedł czas przełomowych zmian - Martech Team przedstawia nowe rozwiązanie dla radii Ford produkcji Visteon, opartych na procesorze TMS470.

    Proces odblokowania polega na odczycie oryginalnego kodu z procesora.
    Cała procedura jest bardzo prosta i wymaga jedynie połączenia się z punktami testowymi na płycie głównej.
    (nie potrzeba żadnego dodatkowego expandera, tylko bezpośrednie połączenia z Port2 do radia).

    Warunki uruchomienia aplikacji:
    - posiadanie aktywacji RCD PRO lub Security Repairer oraz urządzenie Martech Clip
    - aplikacja jest płatna - dla użytkowników PRO wynosi 149 euro netto, dla użytkowników SEC wynosi 99 euro netto.
    - w ramach aktualizacji dojdzie obsługa innych wersji proceosora TMS470
    - głównym celem aplikacji jest obsługiwanie modeli z numerem seryjnym na V i M

    W tym momencie obsługiwane są wersje na TMS470..689:

    - Ford, 1500 RDS Medialess, 6C1T-18C838-AH, TMS470AVF689 by Visteon - V series
    - Ford, 5000C Tape - KW2000, 6S61-18K876-AG, TMS470AVF689 by Visteon - V series
    - Ford, 5000C, 6S61-18K876-AF, TMS470AVF689 by Visteon - M series
    - Ford, 6000 CD Single CD - KW2000, 6S61-18C815-AF, TMS470AVF689 by Visteon - M series
    - Ford, 6000 CD Single CD - KW2000, 6S61-18C815-AG, TMS470AVF689 by Visteon - V series
    - Ford, 6000 CD Single CD - KW2000, 6S61-18C815-AH, TMS470AVF689 by Visteon - V series
    - Ford, 6000 CD, 6S61-14C044-AB, TMS470AVF689 by Visteon - V series
    - Ford, 6000 Single CD - GGDS, 6C1T-18C815-AH, TMS470AVF689 by Visteon - V series
    - Ford, 6000 Single CD - GGDS, 6M2T-18C815-AF, TMS470AVF689 by Visteon - V series
    - Ford, 6006 CDC, 6C1T-18C815-BH, TMS470AVF689 by Visteon - V series

    Uwaga:
    - nie jest to płatna aktualizacja do programu RCD PRO Tools ale oddzielny moduł
    - dla komfortu użytkowania aplikacja została zaimplementowana w RCD PRO Tools

    Wkrótce nowe aplikacje dla :
    - RNS 300 / Audio Lowline BNS 5.0 (odczyt kod bez wylutowania pamięci flash)
    - RNS 310 / Skoda Amundsen (odczyt kodu bez wylutowywania pamięci flash bga)
    - Audi Aisin RNS-E PU 2010 (odczyt kodu bez wylutowywania pamięci flash bga)

    Wszelkie pytania prosimy kierować na shop(malpa)martech.pl .

    Martech Team Nowosci - aktualizacje i opisy
  • #315
    Tech mobil

    GSM Product Supporter
    RCD Tools V0.0.6.4 - Chrysler SN Calc

    Chrysler code calculator from serial number is now available for EVERY RCD Tools user.
    Feel free to calculate codes from following models:

    - Chrysler, Chrysler by Alpine - general calculator ( up to year of 2000 )
    - Chrysler, P04704345-G , 24c00 by Alpine
    - Chrysler, P04859504AB-A , 24c01 by Alpine
    - Chrysler, P05269485 by Alpine
    - Chrysler, P5269486 by Alpine


    As ordinary, this is free update for RCD Tools.

    Just to remind, those who don't remember:
    - RCD is over 2 years in market with free updates
    - we support over 1250 various models
    - we did over 250 free updates and we are not stopping

    Next new models and protcols are coming soon :)

    Best Regards
    Martech Team
  • #316
    Tech mobil

    GSM Product Supporter
    Martech Team przedstawia kolejne unikalne rozwiązanie na rynku radio code.

    Tym razem prezentujemy aplikację do odczytu oryginalnego kodu z radii typu LowLine opartych na procesorze STA2052.
    Od teraz nawigacje z tej serii mogą być odblokowane bez rozkręcania i wylutowywania pamięci flash.
    Cały proces jest banalnie prosty, a czas potrzebny na odczyt kodu to zaledwie pół sekundy.

    Obsługiwane modele i wersje:

    - Audi, RNS LowLine A3, BNS 5.0, 7 612 002 045 by Blaupunkt
    - Audi, RNS LowLine A4, BNS 5.0, 7 612 002 049 by Blaupunkt
    - Audi, RNS LowLine AB2 (A3), BNS 5.0, 7 612 002 091 by Blaupunkt
    - Audi, RNS LowLine B7 (A4), BNS 5.0, 7 612 002 092 by Blaupunkt
    - Audi, RNS LowLine TT, BNS 5.0, 7 612 002 093 by Blaupunkt
    - Skoda, RNS LowLine, 7 612 002 050 by Blaupunkt
    - Skoda, RNS LowLine, 7 612 002 051 by Blaupunkt
    - Seat, RNS LowLine, 7 612 002 055 by Blaupunkt
    - Seat, RNS LowLine, 7 612 002 056 by Blaupunkt
    - Audi, RNS LowLine, BNS 5.0, 7 612 002 046 by Blaupunkt
    - Audi, RNS LowLine, BNS 5.0, 7 612 002 048 by Blaupunkt
    - VW, RNS LowLine, RNS 300, 7 612 002 040 by Blaupunkt
    - VW, RNS LowLine, RNS 300, 7 612 002 042 by Blaupunkt
    - VW, RNS LowLine, RNS 300, 7 612 002 044 by Blaupunkt
    - VW, RNS LowLine, RNS 300, 7 612 002 054 by Blaupunkt
    - VW, RNS LowLine, RNS 300, 7 612 002 076 by Blaupunkt


    Martech Team Nowosci - aktualizacje i opisy

    Program wbudowany jest w rcdpro.exe dla wygody użytkowników.
    Program jest płatny, przewidziane są zniżki dla użytkowników Full Packów (zainteresowani prosimy pisać na shop(malpa)martech.pl).

    Aktualną wersje programów można pobrać z:
    http://martech.pl/support/setup_rcdx.exe

    Pozdrawiamy
    Martech Team
  • #317
    Tech mobil

    GSM Product Supporter
    Martech Rcd Activation Managment Software V0.0.6.6

    We are getting many emails with suggestions "it would be good to have one exe instead of many"..
    So, we are slowly moving all in one pack, this will be easy to navigate and operate.
    Tool autodetect your activations on Clip.


    Latest Update (needs Rcd Pro activation):

    - Chrysler, P05064066AD 6CD MP3, 34W548 DY-3005LX-E, MC9S12DJ256B by Mitsubishi
    - Chrysler, P05064363AA 6CD MP3, 34W571 DY-3007LX-E, MC9S12DJ256B by Mitsubishi
    - Chrysler, P05091509AG, MC9S12DJ256B by Mitsubishi
    - Chrysler, P05091521AC, MC9S12DJ256B by Mitsubishi
    - Chrysler, P0509165AB, MC9S12DJ256B by Mitsubishi


    We recommend to: delete all previous exe and install latest version from setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    You can also run it without Clip and check tool functions (it's demo version too).

    Martech Team
  • #318
    Tech mobil

    GSM Product Supporter
    Security Repairer V0.0.6.6 - VIN repair in PSA group

    Latest Update :


    - Fiat, Multipla CC, BP2371, 7 642 371 316, M68HC11PA8 by Blaupunkt
    - Peugeot, PSA RD4 D2 DT17 MP3 KML VA, BP5110, 7 645 110 392, 95640 by Blaupunkt
    - Peugeot, PSA RD4 D2 DT17 N2 MP3 KML SX2, BP5110, 7 645 110 393, 95320 by Blaupunkt
    - Peugeot, PSA RD4 D2 N2 Basic KML VA, BP5111, 7 645 111 392, 95640 by Blaupunkt
    - Peugeot, PSA RD4 D2 N2 EU KML SX2, BP5111, 7 645 111 393, 95640 by Blaupunkt
    - Peugeot, PSA RD4 D2 N2, BP3141, 7 643 141 392, 95640 by Blaupunkt
    - Peugeot, PSA RD4 T5 N2 MP3 KML VA, BP5129, 7 645 129 392, 95640 by Blaupunkt
    - Peugeot, PSA RD4 T6 N2 MP3, BP5129, 7 645 129 393, 95320 by Blaupunkt

    You can repair VIN via dump or via Direct Mode.

    http://forum.martech.pl/download/7645110393.jpg

    How to update? Run sec.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    Best Regards
    Martech Team
  • #319
    Tech mobil

    GSM Product Supporter
    RCD Tools v0.0.6.7

    Latest Update :

    - Renault, 24V, BP5089, 24c08 by Blaupunkt
    - Opel, CART-2007, 24420605, 28c64 by Philips
    - Hyundai, EMP 300, 24c01 by Hyundai
    - Hyundai, EMP 301 RDS MP3 CD, M85002B200, 24c01 by Hyundai
    - Hyundai, EMP 311K RDS MP3 CD, M85003K230, 24c01 by Hyundai
    - VW, RCD-300, VWZ2Z2, 1K0 035 186P, 24c32 by Grundig
    - Mercedes-Benz, Smart CC, MC3412, hc11ka2 by Grundig
    - Mercedes-Benz, Smart CC, MC3413, hc11ka4 by Grundig
    - Mercedes-Benz, Smart MRR, MC2728, 9.18437-8152, 24c08 by Grundig

    Update: run rcd2.exe to get autoupdate.

    Best Regards
    Martech Team
  • #320
    Tech mobil

    GSM Product Supporter
    [PL]
    RNS 310 / HSRNS - OMAP 5948 Based Decoder

    Martech Team Nowosci - aktualizacje i opisy

    Specjalna aplikacja umożliwiającą odczyt oryginalnego kody z radii RNS 310 oraz HSRNS opartych na procesorze OMAP.
    Odczyt polega na podpięciu 6 przewodów do płyty radia, cały proces trwa kilka sekund.


    Program jest płatny, przewidziane są zniżki dla posiadaczy aktywacji Rcd Pro oraz Security Repairer.
    Szczegóły można uzyskać pisząc na shop(malpa)martech.pl.
    Dla wygodny użytkowania i obsługi - całość została wbudowana w martech_rcd_ams.exe

    Obsługiwane modele i wersje:

    - VW, RNS 310 BVX, 3C0 035 270, 7 612 032 080 by Blaupunkt
    - VW, RNS 310, 3C0 035 270B, 7 612 032 082 by Blaupunkt
    - Skoda, RNS 310, 3T0 035 191, 7 612 032 053 by Blaupunkt
    - Skoda, RNS 310, 3T0 035 191A, 7 612 032 055 by Bosch
    - Skoda, RNS 310, 3T0 035 191B, 7 612 032 056 by Blaupunkt
    - Seat, RNS 310, 5P0 035 191C, 7 612 032 059 by Blaupunkt
    - Ford, HSRNS (NX), 9M5T 18K931 CA, 7 612 300 670 by Blaupunkt

    Martech Team Nowosci - aktualizacje i opisy

    Kolejne wersje i modele - w aktualizacjach.

    Pozdrawiamy
    Martech Team

    [EN]

    RNS 310 / HSRNS - OMAP 5948 Based Decoder

    Martech Team Nowosci - aktualizacje i opisy

    We are glad to present new application designed to read out original codes from RNS 310 and HSRNS navigations.
    Reading consists in pointing the 6 wires to the radio board, the whole process takes a few seconds.


    The program is paid, there is discount for Rcd Pro and Security Repairer users.
    Details can be obtained by writing to shop(malpa)martech.pl.
    For convenient use and service - all were built in martech_rcd_ams.exe

    Supported models and versions:

    - VW RNS 310 BVX, 3C0 035 270 080 7 612 032 by Blaupunkt
    - VW RNS 310, 3C0 035 270b, 7 612 032 082 by Blaupunkt
    - Skoda, RNS 310, 3T0 035 191 053 7 612 032 by Blaupunkt
    - Skoda, RNS 310, 191a 3T0 035, 7 612 032 055 by Bosch
    - Skoda, RNS 310, 3T0 035 191B, 7 612 032 056 by Blaupunkt
    - Seat, RNS 310, 5P0 035 191C, 7 612 032 059 by Blaupunkt
    - Ford, HSRNS (NX), 9M5T 18K931 CA, 7 612 300 670 by Blaupunkt

    Martech Team Nowosci - aktualizacje i opisy

    Next versions and models - will be in updates.

    Best Regards
    Martech Team
  • #321
    Tech mobil

    GSM Product Supporter
    SL3 BruteForce Cloud System is a new addition to Martech Service Manager. The application definitely makes it easy to support multiple computers that count the codes for SL3 phonesusing Brute Force method.The application is based on oclHashcat-lite v0.06. The main part of the application is server, dividing tasks between computers on which SL3Client application is running.

    Martech Team Nowosci - aktualizacje i opisy

    How does it work?

    On Super PC, which is used to count and has the appropriate graphics card, install SL3Client which communicates with the server every few seconds. Serwer is executing all the work with dividing and checking whether the code is counted. We manage the whole process through the site http://servmg.com/:

    • adding logs
    • import from .sha/.log/.fnx/.bcl* files
    • setting the queue
    • grabbing the results
    • adding new PCs
    • monitoring PCs states
    • notification by mail *
    • calculation result sending via e-mail *


      The system can connect up to 1,000 computers. Work on the calculation of one code is divided into 100 or 200 or 500 or 1000 pieces. So small parts are sent to each PC, when one PC calculates its part tells the server about the result, if the code is not found, it retrieves the next part of the counting. If, however, the Pc found the code - the server immediately stops counting on the other PCs and sends them the next parts of another hash.

      How do I start?

    • Download SL3Client application
    • Unpack it in the same folder as oclHashcat-lite v0.06
    • Logo on http://servmg.com/pl/hcloud/, You have to accept the rules of application - there must be file: EULA.accepted in the folder
    • Run SL3Client - it will generate HW Key (the unique number for every PC)
    • On the site click Drone add URL, paste HW Key, add descripton of PC (for example: PC in a green housing) and select the system and type of cards you have in this PC
    • There (on the site) will be generated a KEY to paste into SL3Client
    • It's better to select autostart option(eg after a power failure the program automatically starts up and begins to count)
    • Immediately after starting SL3Client will connect to the server and check if there is some hash in the queue
    • To stop counting on your PC you should close the application


      The biggest advantages of our application are:

    • It does not matter how many Super PCs you have
    • It does not matter how "strong" Super PCs are
    • You can always add more Super PC (even during the counting of some hash)
    • You do not need another computer that works as a server
    • The fastest algorithm v0.06
    • It does not matter the location of PCs - they can be even on other continents;)
    • You do not need to have a constant external ip, or run VPNs
    • x32/x64 and ATi/nVidia Cards support


    F.A.Q.

    What if the PC took the job to count, but is, for example, suspended?

    The server periodically checks to see if the task (that was sent) is still counted. Jf the job has been sent to a PC and no response came, then this task will be sent to another free PC.

    Can 2 PCs get the same task?

    Each task (part of the hash) is sent to only one PC. An exception is when the job was sent but there is no communication with Pc for a long time, then the task is sent to another PC.

    What is the difference between the division into 100/200/500/1000 parts?

    When we have strong PC (~ 8000MH) we select 100, we will lose less time when sending new tasks. The times are about 1.5 seconds to reload task. The advantage of sharing a larger amount of parts is that the progress on the site is frequently updated.

    When the progress on the site is updated?

    Progress is updated only when the PC calculates the whole job he got, then sends info that there is or there isn't a code in this peace. It may happen that for some time the progress is stoped and then suddenly jump significantly. It can happen when several PCs ended the task and sent info to the server.

    In what format the result is given?

    When the counting is completed, there is a .COD file for download on the site. This file can be conwerted to NCK in a few seconds using any box (MX-Key/Cyclone/ATF/FenixKey).

    Do I need internet connection on Super Pc?

    Yes, stable internet connection is necessary. It can be slow but stable.

    Can I have one cloud of Super PC from different locations?

    Yes. It does not matter where the PC is connected to the cloud! They may even be on different continents, it's important just to have access to the Internet.

    How to move logs in the queue?

    Just click on the ID of the hash, hold down and drag anywhere in the queue.

    Screenshots:


    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy

    Download Client Software:
    http://winiu.com/support/sl3client/SL3Client.exe

    Dowload:
    http://winiu.com/support/sl3client/oclHashcat-lite-0.06.7z

    MSM SL3 Status for Android:
    http://winiu.com/support/sl3client/HcloudStatus.apk
    Martech Team Nowosci - aktualizacje i opisy

    PRICE:
    At the moment, addition is FREE for all users of MSM.

    Any questions?
    Sonork: 100.1581690

    Some one can ask, why now ? We have written so we give it ;) !
  • #322
    Tech mobil

    GSM Product Supporter
    RCD PRO Tools V0.0.6.9 - various units

    Latest Update :

    - CQ-VD7005W, FM25160 by Matsushita
    - Volvo, FJXL MBYI A RDO Assembly, 28214608, 24c32 by Delphi
    - Hyundai, HMCNRM100-00, 96510-2L000, K9F5608U0D by Siemens VDO
    Martech Team Nowosci - aktualizacje i opisy

    - Chrysler, P05064924, 24c16 by Alpine
    - VW, RCD 510 MID RVC Rdw BVX, 7 649 299 360, 5K0 035 190, 95128 by Bosch

    Use autoupdate or download via:
    http://martech.pl/support/Public/setup_rcdx.exe

    Check supported models and Clip functions in demo version

    Best Regards
    Martech Team.
  • #323
    Tech mobil

    GSM Product Supporter
    Rcd Tools 0.0.7.0 - Autologin to forum from tools

    From now you can log in automatically to our forum without login/pass in forum.

    How to do it?
    Copy your Clip/Box2 Plus serial number to clipboard.
    Log in normally to forum, go to your Profile in User Control Panel:
    http://forum.martech.pl/ucp.php?i=776

    Fill in section called "device(s) sn.:" - paste your Clip Serial number and tick on Submit.
    Please note: you can add various devices serials but to have it working you must have connected one device.
    Moreover, you will be permanently and automatically added to groups to which you have activations on added serial.

    Now you can logout from forum, run rcd2.exe, go to Box Info and push Forum button. You will be automatically logged in.
    In this way, by clicking on any link to the forum topics (links in tools, in models descriptions) you will be able to read quickly.

    Latest Update:


    - Audi, Concert, AUZ2Z3, 8P0 035 186C, 24c32 by Grundig
    - Mazda, CQ-EM4570AK, 93lc46 by Matsushita
    - Seat, SE 359 RHD BVX, SEZ1Z3, 7 643 237 366, 95320 by Blaupunkt
    - Suzuki, PS-2599D, 39101-50J90, 93c46 by Clarion
    - VW, Premium 7 MEX, VWZ4Z7, 1K0 035 161B, 24c08 by Delphi
    - VW, RCD 300, VWZ1Z2, 7 643 221 360, 1K0 035 186L, 95640 by Blaupunkt


    Best Regards
    Martech Team
  • #324
    Tech mobil

    GSM Product Supporter
    Security Repairer V0.0.7.0 - "Secure" Off and Unregistering

    Latest Update :

    - Alfa Romeo, 937 CD, BP9378, 7 649 378 316, MC68HC11PA8 by Blaupunkt
    - Fiat, 312 SB05 S&S Black, BP8292, 7 648 292 316, 95320 by Blaupunkt
    - Nissan, Low LHD, BP9340, 25lc160 by Blaupunkt
    - Nissan, PN-1628M, CT078, 93lc46 by Clarion
    - Nissan, PP-2609T, CH340, 93c46 by Clarion
    - Saab, FX-M2016ZSA, 93c56 by Pioneer
    - Saab, PU-2147B, 93c56 by Clarion
    - autologin to forum directly from tool (box info, forum button with having Clip SN in Forum profile)

    Saab units - you can unregister with Sec and then register to car with Tech2.

    Martech Team Nowosci - aktualizacje i opisy

    Martech Team Nowosci - aktualizacje i opisy


    How to update? Run sec.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    Best Regards
    Martech Team
  • #325
    Tech mobil

    GSM Product Supporter
    Martech RCD AMS V0.0.7.0 - RNS310 / HSRNS new models

    As ordinary: RNS 310 / HSRNS update is stored in martech_rcd_ams.exe

    Latest Update :
    - Ford, HSRNS (NX), 7 612 300 520, 8S7T 18K931 AC by Blaupunkt
    - Ford, HSRNS (NX), 7 612 300 524, 8S7T 18K931 AD by Blaupunkt
    - Ford, HSRNS (NX), 7 612 300 532, 7S7T 18K931 BK by Blaupunkt
    - Ford, HSRNS (NX), 7 612 300 533, 7S7T 18K931 BJ by Blaupunkt
    - Ford, HSRNS (NX), 7 612 300 537, 8S7T 18K931 BC by Blaupunkt
    - Ford, HSRNS (NX), 7 612 300 580, 8C1T 18K931 AA by Blaupunkt
    - Ford, HSRNS (NX), 7 612 330 741, BV4T 18K931 AB by Blaupunkt

    We prepared [Decoding Procedure] VW RNS310 / Ford HSRNS units for activation owners:
    http://forum.martech.pl/viewtopic.php?f=96&t=7418

    If you need to change forum language:
    http://forum.martech.pl/viewtopic.php?f=81&t=7415

    If you would like to have autologin from tool to forum:
    http://forum.martech.pl/viewtopic.php?f=81&t=7412

    How to update? Run martech_rcd_ams.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    Martech Team.
  • #326
    Tech mobil

    GSM Product Supporter
    Security Repairer V0.0.7.1 - CD 70 / DVD 90 repair after wrong flashing

    Latest Update :

    - Opel, CD 70 Navi, GMGEHU4C1-01, 24c64 by Siemens VDO
    - Opel, DVD 90 Navi, 24c64 by Delphi
    You can repair navigations via dump or via Direct Mode.
    Details are build-in tool, in model description.

    - Fiat, Ducato 250 CD, BP8582, 7 648 582 316, 95640 by Bosch
    - Mercedes-Benz, Sound 5 NG, HA1111, 24c256 by Hyundai
    Sound 5 by Hyundai is now supported for clearing PROD on screen too :)

    How to update? Run sec.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    Check supported models and Clip functions in demo version

    Best Regards
    Martech Team
  • #327
    Dawidos20
    Level 16  
    Tech mobil wrote:
    RCDPRO Tools V0.0.5.3 - M16 & M32 Renesas programmer

    We are proud to present new programmer over Clip and RCD PRO.
    With this release you are able to read, write, verify over 222 various chips from Renesas.

    Moreover, you are able to read original code from RCD 210 within few seconds (so we don't need expander at all anymore for decoding).

    Other famous model which is supported in tool for fast code reading is RCD 500.
    (both Panasonic units)

    Having this update you can:
    - repair dead units
    - change fm frequency
    - convert various units and models from USA to EU etc.


    Connection pinout is build in programmer bookmar and visible on Clip lcd after choosing exact chip also.
    Connection to target board is visible as link after choosing exact radio model:

    - VW, RCD 210 MP3, CQ-JV1871G, 1K0 035 156B, VWZ5Z1, M30879FLFP by Panasonic
    - VW, RCD 210, CQ-JV1872G, 1K0 035 156B, VWZ5Z1, M30879FLFP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1571G, 3C0 035 195A, VWZ5Z7, M30833FJGP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1572G, 3C0 035 195B, VWZ5Z7, M30833FJGP by Panasonic
    - VW, RCD 500 MP3, CQ-EV1573G, 3C0 035 195C, VWZ5Z7, M30833FJGP by Panasonic


    Update: free, run rcdpro.exe for selfupdate.

    Best Regards
    Martech Team

    ps. If someone would ask, here's supported chips list:

    M301N2F8TFP
    M30201F6FP, M30201F6SP, M30201F6TFP, M30201F6TSP, M30218FCFP

    M30220FCGP
    M30245FCGP
    M30260F3AGP, M30260F3TGP, M30260F3VGP, M30260F4AGP, M30260F4TGP, M30260F4VGP
    M30260F6AGP, M30260F6TGP, M30260F6VGP, M30260F8AGP, M30260F8TGP, M30260F8VGP
    M30262F3GP, M30262F4GP, M30262F6GP, M30262F8GP, M30263F3AFP, M30263F4AFP, M30263F6AFP
    M30263F8AFP,

    M30280F6HP, M30280F6THP, M30280F6VHP, M30280F8HP, M30280F8THP, M30280F8VHP, M30280FAHP
    M30280FATHP, M30280FAVHP, M30280FCBHP, M30280FCHP, M30281F6HP, M30281F6THP, M30281F6VHP
    M30281F8HP, M30281F8THP, M30281F8VHP, M30281FAHP, M30281FATHP, M30281FAVHP, M30281FCBHP
    M30281FCHP,

    M30290F8HP, M30290F8THP, M30290F8VHP, M30290FAHP, M30290FATHP, M30290FAVHP
    M30290FCHP, M30290FCTHP, M30290FCVHP, M30291F8HP, M30291F8THP, M30291F8VHP
    M30291FAHP, M30291FATHP, M30291FAVHP, M30291FCHP, M30291FCTHP, M30291FCVHP

    M30620FCAFP, M30620FCAGP, M30620FCMFP, M30620FCMGP, M30620FCNFP, M30620FCNGP
    M30620FCPFP, M30620FCPGP, M30620FCTFP

    M30621FCAGP, M30621FCMGP, M30621FCNGP, M30621FCTGP

    M30622F8PFP, M30622F8PGP

    M30624FGAFP, M30624FGAGP, M30624FGFP, M30624FGGP, M30624FGLFP, M30624FGLGP
    M30624FGMFP, M30624FGMGP, M30624FGNFP, M30624FGNGP, M30624FGPFP, M30624FGPGP

    M30625FGAGP, M30625FGGP, M30625FGLGP, M30625FGMGP, M30625FGNGP

    M30626FHPFP, M30626FHPGP, M30626FJPFP, M30626FJPGP, M30627FHPGP, M30627FJPGP
    M3062GF8NFP, M3062GF8NGP, M3062LFGPFP, M3062LFGPGP, M3062MF8NGP
    M306N0FCFP, M306N0FGFP, M306N1FCFP
    M306N4FCTFP, M306N4FCVFP, M306N4FGTFP, M306N4FGVFP, M306N5FCFP, M306N5FCGP, M306N5FCTFP, M306N5FCTGP, M306N5FCVFP,
    M306N5FCVGP, M306NAFGTFP, M306NAFGVFP, M306NBFCTFP, M306NBFCVFP, M306NKFHGP, M306NKFJTGP, M306NLFHGP, M306NLFJGP
    M306S0AGP, M306V7FGFP
    M30800FCFP, M30800FCGP
    M30802FCGP, M30803FGFP, M30803FGGP, M30805FGGP, M30833FJFP, M30833FJGP, M30835FJGP

    M30843FHFP, M30843FHGP, M30843FHTGP, M30843FJFP, M30843FJGP, M30843FJTGP, M30843FWFP, M30843FWGP, M30843FWTGP
    M30845FHGP, M30845FHTGP, M30845FJGP, M30845FJTGP, M30845FWGP, M30845FWTGP

    M30853FHFP, M30853FHGP, M30853FHTGP
    M30853FJFP, M30853FJGP, M30853FJTGP, M30853FWFP, M30853FWGP, M30853FWTGP
    M30855FHGP, M30855FHTGP, M30855FJGP, M30855FJTGP, M30855FWGP, M30855FWTGP

    M30863FJGP, M30865FJGP, M30865FJTGP

    M30873FHGP, M30875FHGP, M30876FJGP, M30878FJGP

    M30879FKGP, M30879FLFP, M30879FLGP, M3087BFKGP, M3087BFLGP

    M30880FHTGP, M30880FJTGP, M30880FWTGP

    M30882FHTGP, M30882FJTGP, M30882FWTGP

    M30953FJTGP, M30955FJTP

    M37542F8FP, M37641F8FP, M37641F8HP

    M37906F8CFP, M37906F8CSP

    M38039FFFP, M38039FFHFP, M38039FFHHP, M38039FFHKP, M38039FFHP, M38039FFHSP
    M38039FFLHP, M38039FFLKP, M38039FFLSP, M38039FFLWG, M38039FFSP, M38039G6H, M38039GCH

    M38049FFFP, M38049FFHFP, M38049FFHP, M38049FFHSP, M38049FFSP

    M38507F8FP, M38869FFAHP

    M38C29FFFP, M38C29FFHP, M38K29F8FP, M38K29F8HP




    Martech TEAM

    www.martech.pl


    Czy niema problemu z pełnym odczytem układu M306N5FCT i ponownym jego zapisem ? To znaczy odczytanie wsadu z jednej kości i wgranie go do innej ?
  • #328
    Tech mobil

    GSM Product Supporter
    RCD PRO V0.0.7.2 - New Kenwoods supported

    From now, following functions:
    - original code reading, counter reset, write new code (depends on model)

    On following models:

    - KDC-DDX3028, 24c16 by Kenwood
    - KDC-DDX3058, 24c16 by Kenwood
    - KDC-DDX4028BT, 24c16 by Kenwood
    - KDC-DDX4058BT, 24c16 by Kenwood
    - KDC-DNX7240BT, 24c64 by Kenwood
    - KDC-DNX8024BT, 24c64 by Kenwood
    - KDC-DNX8034BT, 24c64 by Kenwood
    - KDC-DNX8054BT, 24c64 by Kenwood
    - KDC-DNX9140, 24c64 by Kenwood
    - KDC-DNX9240BT, 24c64 by Kenwood

    How to update? Run martech_rcd_ams.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe

    Check supported models and Clip functions in demo version

    Martech Team.
  • #329
    Tech mobil

    GSM Product Supporter
    TMS470 Module update - support for 288 and VF48

    Latest Update:
    - support for ALL units based on TMS470..288 and TMS470..VF48

    So, summing up we support ALL versions :)

    Latest Models:

    - Ford, 1500 RDS Medialess, 6C1T-18C838-AJ, TMS470R1VF288 by Visteon - V series
    - Ford, 5000C Tape - KW2000, 6S61-18K876-AJ, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - GGDS D+, 8S7T-18C815-AA, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - GGDS, 6C1T-18C815-AJ, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - GGDS, 8C1T-18C815-AA, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - KW2000, 6S61-18C815-AJ, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - KW2000, 7M5T-18C815-BA, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD - KW2000, 8M5T-18C815-AA, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD Single CD, 8S7T-18C815-AC, TMS470R1VF288 by Visteon - V series
    - Ford, 6000 CD, 7M5T-18C815-AB, TMS470R1VF288 by Visteon - V series
    - Ford, C394-CDI-RECT-KW2000, 8V4T-18C939-CE, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CD1-ISLAND-GGDS, 7S7T-18C939-AF, CDX-FS34XAF, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CD6-ISLAND-GGDS, 7M5T-18C939-BE, CDX-FC34XBE, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CDI-ISLAND-GGDS, 7S7T-18C939-AE, CDX-FS34XAE, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CDI-ISLAND-GGDS, 7S7T-18C939-CA, CDX-FS34XCA, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CDI-ISLAND-KW2000, 7M5T-18C939-JD, CDX-FS307JD, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CDI-RECT-KW2000, 7M5T-18C939-AD, CDX-FS214AD, TMS470R1VF48 by Sony - V series
    - Ford, CD3XX-CDI-RECT-KW2000, 7M5T-18C939-AE, TMS470R1VF48 by Sony - V series
    - Ford, General TMS470R1VF288 based - version 1, TMS470R1VF288 by Visteon - V series
    - Ford, General TMS470R1VF288 based - version 2, TMS470R1VF288 by Visteon - V series
    - Ford, General TMS470R1VF48 based - version 1, TMS470R1VF48 by Sony - V series
    - Ford, General TMS470R1VF48 based - version 2, TMS470R1VF48 by Sony - V series
    - Ford, General TMS470xxx689, TMS470xxx689 by Visteon - V series

    If you don't see your radio part number in list, check what's cpu inside and choose one of general models.

    Example of TMS470..288 decoding:
    http://forum.martech.pl/download/470_288.jpg

    How to update? Run martech_rcd_ams.exe or download and install:
    http://martech.pl/support/Public/setup_rcdx.exe

    Check supported models and Clip functions in demo version

    Till next update..
    Martech Team
  • #330
    Tech mobil

    GSM Product Supporter
    Security Repairer V0.0.7.4 - Cancheck's via iso connector & new vin units

    Latest Security version allows to service Blaupunkt units based on MC68HC11PA8 via ISO connector.

    Supported functions:
    - Cancheck ON / OFF
    - Code ON / OFF
    - Reset Counter
    - Write New Code

    This means - you don't need to open unit at all!
    Simply 3 wires (data in, out, gnd) and seconds for decode.


    Instructions and details are build in tool and in our forum

    Supported models:

    - Alfa Romeo, 937 GTA (CD), BP9377, 7 649 377 316, MC68HC11PA8 by Blaupunkt
    - Alfa Romeo, 937 High (CD), BP9378, 7 649 378 316, MC68HC11PA8 by Blaupunkt
    - Alfa Romeo, 937 Mid (CR), BP9376, 7 649 376 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Ducato CC, BP0373, 7 640 373 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Multipla CC, BP2371, 7 642 371 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Palio CC Clock, BP2378, 7 642 378 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Palio CD Clock, BP2379, 7 642 379 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Palio CD, BP1372, 7 641 372 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Punto High CD, BP1376, 7 641 376 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Scudino CC, BP0371, 7 641 371 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Scudino CD SB03, BP6331, 7 646 331 316, MC68HC11PA8 by Blaupunkt
    - Fiat, Scudino CD, BP0370, 7 640 370 316, MC68HC11PA8 by Blaupunkt

    We prepared fast connection to repair VIN in Clarion units with i2c in tuner.
    You don't need open whole tuner to read 24c02 anymore..

    Details, photos, instructions - just choose one of:
    - Peugeot, PU-2358A(C), 24c02 by Clarion
    - Peugeot, PU-2859A(B), 24c02 by Clarion

    How to update? Run sec.exe or download and get latest version via setup:
    http://martech.pl/support/Public/setup_rcdx.exe


    Check supported models and Clip functions in demo version

    Best Regards
    Martech Team