logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

help to connect gemel siren

drvasile 06 Kwi 2010 16:14 1878 1
REKLAMA
  • #1 7927169
    drvasile
    Poziom 2  
    I have a e36 1995, came from Italy, with a Gemel alarm (control unit and siren). The problem was in disapearing of

    the siren sound. In a forum I found that the problem may be in the siren batteries, I replaced them, with no effect.

    Now it is dead. I found a siren from an e38, Gemel too (I think), most e38 and e39 equiped with it. So on my siren

    there are 6 wires, on a new one only 4. I connected the brown to brown (-), red to red/white(+), purple/white (trigger?) from control unit to black/blue of siren, and everithing works. But I am afraid there is no charging of batteries, there is an only 0.7mA in the red-brown circuit.

    When I connect the black/red from control unit to black/red of siren a 4mA current appears (but not in every case) in the red - brown circuit, so I suppose this black/red wire is responsible for charging, but with this wire

    connected the alarm begin to make noise when I turn the ignition off (1 from 3-5 cases) (and there is a voltage drop

    from 12V ign on to 7V ign off on this wire), and with this wire connected sometimes when I arm the alarm it start to make noise for 30 sec. By the way on my old siren shortcircuiting this black/red to red by a

    key (two black wires with a fuse, in the picture) in the glovebox the siren became quiet, on the new - it start to noise for 30 sec. The remaining 2 wires from my old siren are the second brown and a

    white/black with a 0.15V on it.

    So, what is the black/red responsible for. If charging - I shoud connect it, then what to do with the activating

    siren when ignition off. And how to make the siren quiet (sound only when disturbing the car)

    PS The new siren begin to make noise when disconecting any of these 4 wires, even if I do not activate the alarm,

    the old one did not.

    control unit http://www.postimage.org/image.php?v=aVn2f3J
    my dead siren http://www.postimage.org/image.php?v=PqBzglJ
    conector to my old siren http://www.postimage.org/image.php?v=PqBznQ9
    conector from control unit to old siren http://www.postimage.org/image.php?v=gxRq8Oi
    conector to new siren http://www.postimage.org/image.php?v=TsQH5tr
    the new siren http://www.postimage.org/image.php?v=gxUxY7r
    http://www.postimage.org/image.php?v=gxUy9B9
    http://www.postimage.org/image.php?v=aVqcywS

    please help me to connect siren to alarm control unit
  • REKLAMA
REKLAMA