logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Pytania dot. biosu i timingów MSI NEO2-FR MOA w związku z OC

dawidkali 11 Lis 2010 23:05 2069 1
REKLAMA
  • #1 8732480
    dawidkali
    Poziom 18  
    Więc zacznę od tego, co posiadam
    Mobo MSI P45 NEO2-FR MOA Edition
    Zasilacz OCZ 500W
    Procek Dual Core e2180 2 x 2.00 GHz
    Pamięci Kingston 2 GB 800 MHz
    Grafika GeForce 9600 GT
    Chłodzenie proca Cooler Ninja Scythe 2

    Do dziś udało mi się podciągnąć proca do 3341 MHz stabilnie, gdy dałem o 5 MHz więcej to bluescreen po 30 minutach TT w Prime 95. Vcore w biosie ustawione 1,5975 natomiast cpu-z pokazuje 1,624 a cpuid hwmonitor pokazuje czasem nawet do 1,64 V. Dlaczego tak jest? Od początku pokazują więcej niż w biosie.

    W tym momencie dzielnik FSB:DRAM = 4:5, timingi pamięci 6-5-5-15-44-2T.

    Mam pytanie, gdzie mogę odczytać wartość napięcia na NB i szynie FSB? W biosie mam auto.

    I moje pytania dot. biosu,czego napięcie ustawia się przy:
    MCH voltage
    ICH Voltage

    Co oznaczają funkcje:
    Set Limit CPUID MaxVal to 3 (Disabled/Enabled)
    Zakładka chipset / Opcja HPET - co to?

    Z góry dziękuję za pomoc. Wcześniej miałem Asusa, MSI dwa dni i jeszcze nie łapię wszystkiego tu. Proszę o konkretne odpowiedzi
  • REKLAMA
  • #2 8732885
    neophyte
    Poziom 31  
    MCH voltage - Northbridge (Memory Controller Hub)
    ICH Voltage - Southbridge (I/O Controller Hub)
    Set Limit CPUID MaxVal to 3 -
    Cytat:
    When the computer is booted up, the operating system executes the CPUID instruction to identify the processor and its capabilities. Before it can do so, it must first query the processor to find out the highest input value CPUID recognizes. This determines the kind of basic information CPUID can provide the operating system.

    The maximum CPUID input value determines the values that the operating system can write to the CPUID's EAX register to obtain information about the processor.

    Intel processors from the Pentium Pro onwards have a maximum CPUID input value of only 02h or 03h. The only exception is the Intel Pentium 4 with Hyper-Threading Technology (HTT).

    Older operating systems like Windows 95/98 and Windows Me were released before the Intel Pentium 4 with HTT and are therefore not aware of such a processor. They are not capable of handling the extra CPUID information provided by the processor with EAX input values greater than 03h.

    This is where the Limit CPUID Max. to 3 BIOS feature comes in. It allows you to circumvent problems with older operating systems that do not support the Intel Pentium 4 processor with Hyper-Threading Technology.

    When enabled, the processor will limit the maximum CPUID input value to 03h when queried, even if the processor supports a higher CPUID input value.

    When disabled, the processor will return the actual maximum CPUID input value of the processor when queried.

    HPET - nowy typ timera http://en.wikipedia.org/wiki/High_Precision_Event_Timer

    Co do pomiaru napięć to płyta jest popularna więc radzę poszukać po sieci, może ktoś wykombinował gdzie można ją miernikiem zbadać.
REKLAMA