Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek dla www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Nokia 5310 zaiwesza sie na logo nokia

02 Lut 2011 19:19 2188 9
  • Poziom 9  
    Witam.
    Telefon był sprawny tylko miał simlock i nie miał polskiego języka.
    Więc wgrałem polski język - udało się,
    i przy probie ściagania simlocka (niby operacja zakończyła sie pozytywnie)
    telefon się juz nie włącza całkiem a zawiesza się na logo nokii.
    Teraz jak próbuje softować to na tym momemncie się zatrzymuje i dalej nie idzie, oto log z flasha:
    GTR: 0060280383 - Nokia Flash/Repair v2.36.3
    Box: CR V 1.002 256
    Code: NK V 2.001 1055
    SN: 0060280383
    Nokia Unlimited: 1074 times started
    SonyEricsson Unlimited: 331 times started
    Phone not powered
    ============= Set Flash mode for info =============
    Boot...
    Using Tx2 Data line.
    Trying boot BB5 phone...

    rap3gv3_2nd.fg
    RAP3Gv3_algo.fg
    Phone doesn't have APE
    Phone Type: BB5
    ------------------- SYSTEM ID Response: 7 blocks -------------
    SYSTEM_ASIC_ID( RAP ):
    000000010000022600010006010C192101013000
    EM_ASIC_ID( RAP ):
    00000295
    EM_ASIC_ID( RAP ):
    00000B22
    PUBLIC_ID( RAP ):
    0CD00014A0AB7E564964CA77E6AA700EEE7935C4
    ASIC_MODE_ID( RAP ):
    00
    ROOT_KEY_HASH( RAP ):
    BAF3A9C3DBFA8454937DB77F2B8852B1
    ROM_ID( RAP ):
    273F6D55DFAAF68F
    --------------- Device ID Response: 3 blocks -------------
    Storage Device:
    Owner Asic: RAP
    NOR
    Index: 0
    Flash: Samsung, 00EC 220C 0000 8921
    Storage Device Contents:
    Owner Asic: RAP
    000000000000000000000000000000000000
    ============= Set FBus mode for info =============
    VBat is 3.96V

    Vpp pin has 1.32V, Connected
    Pins:
    Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
    Phone is in: Phone is not responding, power on phone!
    Unknown mode
    Scanning files, please wait...
    Done
    Selected Highest installed version: 10.10
    Mcu rm303__10.10.mcusw
    Ppm rm303__10.10.ppm_b
    Content rm303__10.10.image_b_whitemica_silver
    MemoryCardContent
    rm303__10.10_sd_euro_2048.fpsimage
    Using Tx2 Data line.
    BB5 PM back Phone is in: Phone is not responding!
    Processing File: rm303__10.10.mcusw
    Boot...
    rap3gv3_2nd.fg
    RAP3Gv3_algo.fg
    CMT Certificates
    NPC 0x0200
    HWC 0x0100
    CCC 0x0200
    C:\Program Files\GriffinTeam\MT-Box\rpls\xxxxx_1.rpl
    Erase RAP3 [00000000 - 000006BF]
    Erase RAP3 [000006C0 - 0001FFFF]
    Erase RAP3 [00040000 - 000BFFFF]
    Erase RAP3 [000C0000 - 0013FFFF]
    Erase RAP3 [00140000 - 010DFFFF]
    Erase RAP3 [010E0000 - 0121FFFF]
    Erase[18.00 MB]...
    Waiting response for 132 Sec...in 43.73s
    Flash[17.05 MB]...in 73.91s
    * * Processed file in 134.13 seconds
    Processing File: rm303__10.10.image_b_whitemica_silver
    Boot...
    rap3gv3_2nd.fg
    RAP3Gv3_algo.fg
    Erase RAP3 [018A0000 - 01B1FFFF]
    Erase RAP3 [01B20000 - 03FBFFFF]
    Erase[39.13 MB]...
    Waiting response for 132 Sec...in 36.52s
    Flash[8.64 MB]...in 34.97s
    * * Processed file in 114.28 seconds
    Extract content...

    Jak moge rozwiązać ten problem, wcześniej telefon działał bez zarzutu.
  • Poziom 26  
    Z tego co widzę robisz to Mt-boxem tak? Wgraj backup certyfikatów, masz je w katalogu mt-boxa w folderze "bb5bckup".
  • Poziom 9  
    Jak to mozna zrobic?
    Albo czy znajdę gdzieś potrzebne informację - jestem początkujący

    Dodano po 4 [minuty]:

    A mogę prosic dokładniejsze instrukcje? jak to wgrać?

    Dodano po 52 [sekundy]:

    Poza tym ejst duzo plikow z rm303, skąd mam wiedzieć które to? Jestem totalnie zielony...
  • Poziom 26  
    Po numerze imei i dacie utworzenia pliku dojdziesz który backup od tego telefonu.
  • Poziom 9  
    a jak go wgrać?
  • Poziom 26  
    W mt-boxie po prawej stronie masz opcję PMM. Tzn EEPROM PMM ReadWrite. Dajesz Load File a później Write All. Sofcik i jest.
  • Poziom 9  
    Jak rozumiem mam dać load file, a potem write all? tak?
  • Poziom 26  
    Tak dokładnie. A że tak zapytam jak sczytasz telefon to imei jest normalny czy 1234...?
  • Poziom 9  
    Oto log (dalej to samo):
    GTR: 0060280383 - Nokia Flash/Repair v2.36.3
    Box: CR V 1.002 256
    Code: NK V 2.001 1055
    SN: 0060280383
    Nokia Unlimited: 1075 times started
    SonyEricsson Unlimited: 331 times started
    Scanning files, please wait...
    Done
    Selected Highest installed version: 10.10
    Mcu rm303__10.10.mcusw
    Ppm rm303__10.10.ppm_b
    Content rm303__10.10.image_b_whitemica_silver
    MemoryCardContent
    rm303__10.10_sd_euro_2048.fpsimage
    Phone not powered
    ============= Set Flash mode for info =============
    Boot...
    Using Tx2 Data line.
    Trying boot BB5 phone...

    rap3gv3_2nd.fg
    RAP3Gv3_algo.fg
    Phone doesn't have APE
    Phone Type: BB5
    ------------------- SYSTEM ID Response: 7 blocks -------------
    SYSTEM_ASIC_ID( RAP ):
    000000010000022600010006010C192101013000
    EM_ASIC_ID( RAP ):
    00000295
    EM_ASIC_ID( RAP ):
    00000B22
    PUBLIC_ID( RAP ):
    0CD00014A0AB7E564964CA77E6AA700EEE7935C4
    ASIC_MODE_ID( RAP ):
    00
    ROOT_KEY_HASH( RAP ):
    BAF3A9C3DBFA8454937DB77F2B8852B1
    ROM_ID( RAP ):
    273F6D55DFAAF68F
    --------------- Device ID Response: 3 blocks -------------
    Storage Device:
    Owner Asic: RAP
    NOR
    Index: 0
    Flash: Samsung, 00EC 220C 0000 8921
    Storage Device Contents:
    Owner Asic: RAP
    000000000000000000000000000000000000
    ============= Set FBus mode for info =============
    VBat is 3.96V

    Vpp pin has 1.32V, Connected
    Pins:
    Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
    PMM Send File
    Warning: Failed to write 001:0000, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0002, 70bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0003, 70bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0004, 70bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0006, 276bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0007, 276bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0008, 276bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:000A, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:000B, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:000C, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:000E, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:000F, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0010, 384bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0011, 32bytes.
    Use SX4 button to authorize
    Warning: Failed to write 001:0013, 16bytes.
    Use SX4 button to authorize
    Warning: Failed to write 002:0000, 440bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0001, 800bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0003, 10bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0004, 8bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0005, 8bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0006, 8bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0009, 5bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0012, 80bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:0013, 4bytes.
    Use SX4 button to authorize
    Warning: Failed to write 004:001C, 2bytes.
    Use SX4 button to authorize
    Warning: Failed to write 078:0000, 56bytes.
    Use SX4 button to authorize
    Warning: Failed to write 078:0001, 80bytes.
    Use SX4 button to authorize
    Warning: Failed to write 078:0002, 20bytes.
    Use SX4 button to authorize
    Warning: Failed to write 078:0003, 112bytes.
    Use SX4 button to authorize
    Warning: Failed to write 0C1:0002, 8bytes.
    Use SX4 button to authorize
    Warning: Failed to write 0C1:0003, 32bytes.
    Use SX4 button to authorize
    Warning: Failed to write 0C1:0004, 32bytes.
    Use SX4 button to authorize
    Warning: Failed to write 0C1:0009, 64bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0000, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0003, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0004, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0005, 10bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0006, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0007, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0008, 1bytes.
    Use SX4 button to authorize
    Warning: Failed to write 134:0009, 40bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0000, 4bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0001, 2bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0002, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0004, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0005, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0007, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0008, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 135:0011, 12bytes.
    Use SX4 button to authorize
    Warning: Failed to write 142:0000, 1bytes.
    Use SX4 button to authorize
    Operation Completed
  • Poziom 26  
    Zrób najpierw autoryzację SX4 (klawisz SX4) i później wgraj tego PM.

    Dodano po 4 [minuty]:

    Może jeszcze inaczej.
    W tym poście masz plik erase :arrow:Link wgraj go do telefonu, później wrzuć sofcik, zrób autoryzację SX4 i na końcu jeszcze raz tego PM.
    W załączniku czysty PM.