Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Pralka Beko WMD26105T jakie łożyska?

sebakow1 17 Mar 2011 11:24 9517 9
  • #1 17 Mar 2011 11:24
    sebakow1
    Poziom 1  

    czy ktos z was wie jakie są łóżyska w pralce beko wmd 26105 T


    Mod. ROBSON33
    Regulamin 15
    Proszę poprawić post nie usuwając powyższego wpisu .

    0 9
  • #2 17 Mar 2011 20:00
    january wietrzyk
    Poziom 18  

    Witam. Prawdopodobnie w tej pralce wymienia się cały zespół piorący, koszt jego ok.400zł.

    1
  • #3 17 Mar 2011 20:08
    honorarac
    Poziom 18  

    For model WMD 26120 T is (45x72x10) + 6206 + 6207, probably is the same for model WMD 26105 T.

    0
  • #4 19 Mar 2011 07:49
    skryn
    Admin grupy AGD

    honorarac napisał:
    For model WMD 26120 T is (45x72x10) + 6206 + 6207, probably is the same for model WMD 26105 T.

    Theese both models are not the same!

    Owszem, do WMD26120T są takie łożyska i uszczelniacz.
    Natomiast w modelu WMD26105 łożyska są niewymienne! (kompletny zespół piorący, nierozbieralny)

    0
  • #5 19 Mar 2011 15:10
    honorarac
    Poziom 18  

    I think it is possible, when you take the tub out of the mashine you have to make 20-25 holes for bolt M5x2o, then you can cut the plastic tub, separate front part, remove drum and take out semering and bearings. After replacement the new bearings kit with semering use silicon before you put together cut parts, then use bolts to secure tub from separation during the washing. The same principal is for other brands like Indesit, Candy etc. New tub with bearings is too expensive, this method is cheaper.
    Pralka Beko WMD26105T jakie łożyska?
    Pralka Beko WMD26105T jakie łożyska? Pralka Beko WMD26105T jakie łożyska? Pralka Beko WMD26105T jakie łożyska?
    I did myself few Indesit on this way, they stil works. Good luck with replacment.

    0
  • #6 19 Mar 2011 17:46
    skryn
    Admin grupy AGD

    honorarac napisał:
    I think it is possible, (...)
    I did myself few Indesit on this way, they stil works. Good luck with replacment.

    Of course, it's possible.
    But, did You make Beko drum? I'm sure, not.
    Probably, You'll be a big problem with ''cup pressure"... :wink:

    0
  • #7 19 Mar 2011 19:50
    honorarac
    Poziom 18  

    No, i never cut Beko, but this is the perfect way to find is it possible, someone had to try and share his experience with us, that will be answer is it possible or not.
    If sebakow1 try and do it he will spare some money, if not he can always buy a new drum.:D

    0
  • #8 19 Mar 2011 21:04
    nares
    Specjalista AGD

    honorarac napisał:
    No, i never cut Beko, but this is the perfect way to find is it possible, someone had to try and share his experience with us, that will be answer is it possible or not.

    But there are some limits :D

    0
  • #10 19 Mar 2011 21:44
    nares
    Specjalista AGD

    There are certain limits, not everything can be cut and glue.

    0