Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Wolne kopiowanie pomiedzy dyskami s-ata

Quamis 14 Lip 2011 11:09 3111 8
  • #1 14 Lip 2011 11:09
    Quamis
    Poziom 20  

    Witam. Posiadam 2 dyski s-ata samsung HD502HJ oraz seagate ST3250820AS obydwa sa podlaczone do kontrolera na plycie glownej ECS P4M800-M7, problem polega na tym, iz kopiowanie plikow z jednego dysku na drugi spada do 3Mb/sec probowalem podlaczyc inne dyski (takze pod ATA) i efekt jest identyczny. Probowalem przetestowac predkosc zapisu i odczytu na kazdym z dyskow przy pomocy HDTach i wyniki sa OK. Czy mam cos nie tak z ustawieniami?

    0 8
  • #2 14 Lip 2011 12:10
    helmud7543
    Poziom 42  

    Daj SMART obydwu dysków, sprawdź stan fragmentacji (nie ma wpływu na testy powierzchni ale na kopiowanie plików już tak) na początek.

    0
  • #3 14 Lip 2011 18:26
    Quamis
    Poziom 20  

    Wedlug statyskyk ponizej wszystko wyglada OK, obydwa dyski byly zdefragmentowane przy pomocy PerfectDisk 8.0

    Z dysku samsung:

    *** DiskCheckup V3.1 Build: 1000 Report ***

    SysInfo DLL Version: SysInfo v1.0 Build: 1014
    Time of export: 17:58:33 14-jul-2011

    Device information:
    Device ID: 0
    Interface: ATA
    Device Capacity: 476937 MB
    Serial Number: S20BJ9CZ503141
    Model Number: SAMSUNG HD502HJ
    Firmware Revision: 1AJ10001
    Partitions:
    C: 26929 MB
    D: 450000 MB

    ATA information:

    Disk geometry:
    Cylinders: 60801
    Tracks/Cylinder: 255
    Sectors/Track: 63
    Bytes/Sector: 512
    Total disk sectors: 976773168
    Logical sector size: 512
    Physical sector size: 512
    Media rotation rate: 7200 RPM
    Buffer size: 16384 KB
    ECC size: 80 Bytes

    Standards compliance:
    ATA8-ACS Supported: Yes
    ATA/ATAPI-7 Supported: Yes
    ATA/ATAPI-6 Supported: Yes
    ATA/ATAPI-5 Supported: Yes
    ATA/ATAPI-4 Supported: Yes
    Serial/Parallel: Serial
    SATA 3.0 Compilance: No
    SATA 2.6 Compilance: Yes
    SATA 2.5 Compilance: Yes
    SATA II: Ext Compilance: Yes
    SATA 1.0a Compilance: Yes




    ATA8-AST Compilance: Yes
    World Wide ID: 50024E920267BC32

    Feature support:
    SMART supported: Yes
    SMART enabled: Yes
    SMART self-test supported: Yes
    SMART error log supported: Yes
    LBA supported: Yes
    IORDY supported: Yes
    CFast supported: No
    DMA supported: Yes
    Maximum Multiword DMA mode supported: 2
    Multiword DMA selected: None
    Maximum UltraDMA mode supported: 6
    UltraDMA selected: 0
    Maximum PIO mode supported: 4
    SATA Compliance: Yes
    NCQ priority information supported: Yes
    Unload while NCQ commands are outstanding supported: No
    Phy Event Counters supported: Yes
    Receipt of power management requests supported: Yes
    NCQ feature set supported: Yes
    SATA Gen2 Signaling Speed (3.0Gb/s) supported: Yes
    SATA Gen1 Signaling Speed (1.5Gb/s) supported: Yes
    Software Settings Preservation: Supported, Enabled
    In-order data delivery: Not supported
    Initiating power management: Supported, Disabled
    DMA Setup auto-activation: Supported, Disabled
    Non-zero buffer offsets: Not supported
    Trusted Computing supported: No
    Host Protected Area (HPA) supported: Yes
    Read look-ahead supported: Yes
    Read look-ahead enabled: Yes
    Write cache supported: Yes
    Write cache enabled: Yes
    Power management supported: Yes
    Security mode supported: Yes
    Security mode enabled: No
    Device Configuration Overlay (DCO) supported: Yes
    48bit Addressing supported: Yes
    Auto Acoustic Managment (AAM) supported: Yes
    Auto Acoustic Managment (AAM) enabled: No
    Power-up in Standby (PUIS) supported: Yes
    Power-up in Standby (PUIS) enabled: No
    Advanced Power Management (APM) supported: Yes
    Advanced Power Management (APM) enabled: No
    CompactFlash Association (CFA) supported: No
    General Purpose Logging (GPL) supported: Yes
    Streaming supported: No
    Media card pass through supported: No
    Extended power conditions supported: No
    Extended status reporting supported: No
    Write-read-verify supported: No
    Free-fall control supported: No
    TRIM command supported: No
    SCT command transport supported: Yes
    NV Cache enabled: No
    NV Cache Power Management supported: No

    SMART ATTRIBUTES:
    ID Description Status Value Worst Threshold Raw Value TEC
    ---------------------------------------------------------------------------------------------------------------------------------------------
    1 Raw Read Error Rate OK 100 100 51 0 N.A.
    2 Throughput Performance OK 252 252 0 0 N.A.
    3 Spin Up Time OK 83 82 25 5449 N.A.
    4 Start/Stop Count OK 100 100 0 402 N.A.
    5 Reallocated Sector Count OK 252 252 10 0 N.A.
    7 Seek Error Rate OK 252 252 51 0 N.A.
    8 Seek Time Performance OK 252 252 15 0 N.A.
    9 Power On Time OK 100 100 0 1468 N.A.
    10 Spin Retry Count OK 252 252 51 0 N.A.
    11 Calibration Retry Count OK 252 252 0 0 N.A.
    12 Power Cycle Count OK 100 100 0 410 N.A.
    191 G-sense Error Rate OK 100 100 0 1 N.A.
    192 Power off Retract Count OK 252 252 0 0 N.A.
    194 Temperature OK 64 57 0 35 C N.A.
    195 Hardware ECC Recovered OK 100 100 0 0 N.A.
    196 Reallocation Event Count OK 252 252 0 0 N.A.
    197 Current Pending Sector Count OK 252 252 0 0 N.A.
    198 Uncorrectable Sector Count OK 252 252 0 0 N.A.
    199 UltraDMA CRC Error Count OK 96 96 0 2388 N.A.
    200 Write Error Count OK 100 100 0 2 N.A.
    223 Load/Unload retry count OK 252 252 0 0 N.A.
    225 Load Cycle Count OK 100 100 0 412

    z dysku seagate:

    *** DiskCheckup V3.1 Build: 1000 Report ***

    SysInfo DLL Version: SysInfo v1.0 Build: 1014
    Time of export: 17:59:00 14-jul-2011

    Device information:
    Device ID: 1
    Interface: ATA
    Device Capacity: 238472 MB
    Serial Number: 9QE0501F
    Model Number: ST3250820AS
    Firmware Revision: 3.AAD
    Partitions:
    F: 238472 MB

    ATA information:

    Disk geometry:
    Cylinders: 30401
    Tracks/Cylinder: 255
    Sectors/Track: 63
    Bytes/Sector: 512
    Total disk sectors: 488397168
    Logical sector size: 512
    Physical sector size: 512
    Media rotation rate: N/A
    Buffer size: 8192 KB
    ECC size: 4 Bytes

    Standards compliance:
    ATA8-ACS Supported: No
    ATA/ATAPI-7 Supported: Yes
    ATA/ATAPI-6 Supported: Yes
    ATA/ATAPI-5 Supported: Yes
    ATA/ATAPI-4 Supported: Yes
    World Wide ID: 0000000000000000

    Feature support:
    SMART supported: Yes
    SMART enabled: Yes
    SMART self-test supported: Yes
    SMART error log supported: Yes
    LBA supported: Yes
    IORDY supported: Yes
    CFast supported: No
    DMA supported: Yes
    Maximum Multiword DMA mode supported: 2
    Multiword DMA selected: None
    Maximum UltraDMA mode supported: 6
    UltraDMA selected: 6
    Maximum PIO mode supported: 4
    SATA Compliance: Yes
    NCQ priority information supported: No
    Unload while NCQ commands are outstanding supported: No
    Phy Event Counters supported: Yes
    Receipt of power management requests supported: No
    NCQ feature set supported: Yes
    SATA Gen2 Signaling Speed (3.0Gb/s) supported: Yes
    SATA Gen1 Signaling Speed (1.5Gb/s) supported: Yes
    Software Settings Preservation: Supported, Enabled
    In-order data delivery: Not supported
    Initiating power management: Supported, Disabled
    DMA Setup auto-activation: Not supported
    Non-zero buffer offsets: Not supported
    Trusted Computing supported: No
    Host Protected Area (HPA) supported: Yes
    Read look-ahead supported: Yes
    Read look-ahead enabled: Yes
    Write cache supported: Yes
    Write cache enabled: Yes
    Power management supported: Yes
    Security mode supported: Yes
    Security mode enabled: No
    Device Configuration Overlay (DCO) supported: Yes
    48bit Addressing supported: Yes
    Auto Acoustic Managment (AAM) supported: No
    Power-up in Standby (PUIS) supported: No
    Advanced Power Management (APM) supported: No
    CompactFlash Association (CFA) supported: No
    General Purpose Logging (GPL) supported: Yes
    Streaming supported: No
    Media card pass through supported: No
    Extended power conditions supported: No
    Extended status reporting supported: No
    Write-read-verify supported: Yes
    Write-read-verify enabled: No
    Free-fall control supported: No
    TRIM command supported: No
    SCT command transport supported: No
    NV Cache enabled: No
    NV Cache Power Management supported: No

    SMART ATTRIBUTES:
    ID Description Status Value Worst Threshold Raw Value TEC
    ---------------------------------------------------------------------------------------------------------------------------------------------
    1 Raw Read Error Rate OK 109 96 6 62710173 N.A.
    3 Spin Up Time OK 91 90 0 0 N.A.
    4 Start/Stop Count OK 100 100 20 483 N.A.
    5 Reallocated Sector Count OK 100 100 36 0 N.A.
    7 Seek Error Rate OK 60 57 30 326481300696 N.A.
    9 Power On Time OK 98 98 0 1759 N.A.
    10 Spin Retry Count OK 100 100 97 0 N.A.
    12 Power Cycle Count OK 99 99 20 1457 N.A.
    187 Reported Uncorrectable Errors OK 94 94 0 6 N.A.
    189 High Fly Writes OK 100 100 0 0 N.A.
    190 Temperature Difference from 100 OK 54 42 45 789905454 N.A.
    194 Temperature OK 46 58 0 46 C N.A.
    195 Hardware ECC Recovered OK 63 59 0 152152835 N.A.
    197 Current Pending Sector Count OK 100 100 0 0 N.A.
    198 Uncorrectable Sector Count OK 100 100 0 0 N.A.
    199 UltraDMA CRC Error Count OK 200 200 0 0 N.A.
    200 Write Error Count OK 100 253 0 0 N.A.
    202 Data Address Mark Errors OK 100 253 0 0 N.A.

    Dodano po 18 [sekundy]:

    Wedlug statyskyk ponizej wszystko wyglada OK, obydwa dyski byly zdefragmentowane przy pomocy PerfectDisk 8.0

    Z dysku samsung:

    *** DiskCheckup V3.1 Build: 1000 Report ***

    SysInfo DLL Version: SysInfo v1.0 Build: 1014
    Time of export: 17:58:33 14-jul-2011

    Device information:
    Device ID: 0
    Interface: ATA
    Device Capacity: 476937 MB
    Serial Number: S20BJ9CZ503141
    Model Number: SAMSUNG HD502HJ
    Firmware Revision: 1AJ10001
    Partitions:
    C: 26929 MB
    D: 450000 MB

    ATA information:

    Disk geometry:
    Cylinders: 60801
    Tracks/Cylinder: 255
    Sectors/Track: 63
    Bytes/Sector: 512
    Total disk sectors: 976773168
    Logical sector size: 512
    Physical sector size: 512
    Media rotation rate: 7200 RPM
    Buffer size: 16384 KB
    ECC size: 80 Bytes

    Standards compliance:
    ATA8-ACS Supported: Yes
    ATA/ATAPI-7 Supported: Yes
    ATA/ATAPI-6 Supported: Yes
    ATA/ATAPI-5 Supported: Yes
    ATA/ATAPI-4 Supported: Yes
    Serial/Parallel: Serial
    SATA 3.0 Compilance: No
    SATA 2.6 Compilance: Yes
    SATA 2.5 Compilance: Yes
    SATA II: Ext Compilance: Yes
    SATA 1.0a Compilance: Yes
    ATA8-AST Compilance: Yes
    World Wide ID: 50024E920267BC32

    Feature support:
    SMART supported: Yes
    SMART enabled: Yes
    SMART self-test supported: Yes
    SMART error log supported: Yes
    LBA supported: Yes
    IORDY supported: Yes
    CFast supported: No
    DMA supported: Yes
    Maximum Multiword DMA mode supported: 2
    Multiword DMA selected: None
    Maximum UltraDMA mode supported: 6
    UltraDMA selected: 0
    Maximum PIO mode supported: 4
    SATA Compliance: Yes
    NCQ priority information supported: Yes
    Unload while NCQ commands are outstanding supported: No
    Phy Event Counters supported: Yes
    Receipt of power management requests supported: Yes
    NCQ feature set supported: Yes
    SATA Gen2 Signaling Speed (3.0Gb/s) supported: Yes
    SATA Gen1 Signaling Speed (1.5Gb/s) supported: Yes
    Software Settings Preservation: Supported, Enabled
    In-order data delivery: Not supported
    Initiating power management: Supported, Disabled
    DMA Setup auto-activation: Supported, Disabled
    Non-zero buffer offsets: Not supported
    Trusted Computing supported: No
    Host Protected Area (HPA) supported: Yes
    Read look-ahead supported: Yes
    Read look-ahead enabled: Yes
    Write cache supported: Yes
    Write cache enabled: Yes
    Power management supported: Yes
    Security mode supported: Yes
    Security mode enabled: No
    Device Configuration Overlay (DCO) supported: Yes
    48bit Addressing supported: Yes
    Auto Acoustic Managment (AAM) supported: Yes
    Auto Acoustic Managment (AAM) enabled: No
    Power-up in Standby (PUIS) supported: Yes
    Power-up in Standby (PUIS) enabled: No
    Advanced Power Management (APM) supported: Yes
    Advanced Power Management (APM) enabled: No
    CompactFlash Association (CFA) supported: No
    General Purpose Logging (GPL) supported: Yes
    Streaming supported: No
    Media card pass through supported: No
    Extended power conditions supported: No
    Extended status reporting supported: No
    Write-read-verify supported: No
    Free-fall control supported: No
    TRIM command supported: No
    SCT command transport supported: Yes
    NV Cache enabled: No
    NV Cache Power Management supported: No

    SMART ATTRIBUTES:
    ID Description Status Value Worst Threshold Raw Value TEC
    ---------------------------------------------------------------------------------------------------------------------------------------------
    1 Raw Read Error Rate OK 100 100 51 0 N.A.
    2 Throughput Performance OK 252 252 0 0 N.A.
    3 Spin Up Time OK 83 82 25 5449 N.A.
    4 Start/Stop Count OK 100 100 0 402 N.A.
    5 Reallocated Sector Count OK 252 252 10 0 N.A.
    7 Seek Error Rate OK 252 252 51 0 N.A.
    8 Seek Time Performance OK 252 252 15 0 N.A.
    9 Power On Time OK 100 100 0 1468 N.A.
    10 Spin Retry Count OK 252 252 51 0 N.A.
    11 Calibration Retry Count OK 252 252 0 0 N.A.
    12 Power Cycle Count OK 100 100 0 410 N.A.
    191 G-sense Error Rate OK 100 100 0 1 N.A.
    192 Power off Retract Count OK 252 252 0 0 N.A.
    194 Temperature OK 64 57 0 35 C N.A.
    195 Hardware ECC Recovered OK 100 100 0 0 N.A.
    196 Reallocation Event Count OK 252 252 0 0 N.A.
    197 Current Pending Sector Count OK 252 252 0 0 N.A.
    198 Uncorrectable Sector Count OK 252 252 0 0 N.A.
    199 UltraDMA CRC Error Count OK 96 96 0 2388 N.A.
    200 Write Error Count OK 100 100 0 2 N.A.
    223 Load/Unload retry count OK 252 252 0 0 N.A.
    225 Load Cycle Count OK 100 100 0 412

    z dysku seagate:

    *** DiskCheckup V3.1 Build: 1000 Report ***

    SysInfo DLL Version: SysInfo v1.0 Build: 1014
    Time of export: 17:59:00 14-jul-2011

    Device information:
    Device ID: 1
    Interface: ATA
    Device Capacity: 238472 MB
    Serial Number: 9QE0501F
    Model Number: ST3250820AS
    Firmware Revision: 3.AAD
    Partitions:
    F: 238472 MB

    ATA information:

    Disk geometry:
    Cylinders: 30401
    Tracks/Cylinder: 255
    Sectors/Track: 63
    Bytes/Sector: 512
    Total disk sectors: 488397168
    Logical sector size: 512
    Physical sector size: 512
    Media rotation rate: N/A
    Buffer size: 8192 KB
    ECC size: 4 Bytes

    Standards compliance:
    ATA8-ACS Supported: No
    ATA/ATAPI-7 Supported: Yes
    ATA/ATAPI-6 Supported: Yes
    ATA/ATAPI-5 Supported: Yes
    ATA/ATAPI-4 Supported: Yes
    World Wide ID: 0000000000000000

    Feature support:
    SMART supported: Yes
    SMART enabled: Yes
    SMART self-test supported: Yes
    SMART error log supported: Yes
    LBA supported: Yes
    IORDY supported: Yes
    CFast supported: No
    DMA supported: Yes
    Maximum Multiword DMA mode supported: 2
    Multiword DMA selected: None
    Maximum UltraDMA mode supported: 6
    UltraDMA selected: 6
    Maximum PIO mode supported: 4
    SATA Compliance: Yes
    NCQ priority information supported: No
    Unload while NCQ commands are outstanding supported: No
    Phy Event Counters supported: Yes
    Receipt of power management requests supported: No
    NCQ feature set supported: Yes
    SATA Gen2 Signaling Speed (3.0Gb/s) supported: Yes
    SATA Gen1 Signaling Speed (1.5Gb/s) supported: Yes
    Software Settings Preservation: Supported, Enabled
    In-order data delivery: Not supported
    Initiating power management: Supported, Disabled
    DMA Setup auto-activation: Not supported
    Non-zero buffer offsets: Not supported
    Trusted Computing supported: No
    Host Protected Area (HPA) supported: Yes
    Read look-ahead supported: Yes
    Read look-ahead enabled: Yes
    Write cache supported: Yes
    Write cache enabled: Yes
    Power management supported: Yes
    Security mode supported: Yes
    Security mode enabled: No
    Device Configuration Overlay (DCO) supported: Yes
    48bit Addressing supported: Yes
    Auto Acoustic Managment (AAM) supported: No
    Power-up in Standby (PUIS) supported: No
    Advanced Power Management (APM) supported: No
    CompactFlash Association (CFA) supported: No
    General Purpose Logging (GPL) supported: Yes
    Streaming supported: No
    Media card pass through supported: No
    Extended power conditions supported: No
    Extended status reporting supported: No
    Write-read-verify supported: Yes
    Write-read-verify enabled: No
    Free-fall control supported: No
    TRIM command supported: No
    SCT command transport supported: No
    NV Cache enabled: No
    NV Cache Power Management supported: No

    SMART ATTRIBUTES:
    ID Description Status Value Worst Threshold Raw Value TEC
    ---------------------------------------------------------------------------------------------------------------------------------------------
    1 Raw Read Error Rate OK 109 96 6 62710173 N.A.
    3 Spin Up Time OK 91 90 0 0 N.A.
    4 Start/Stop Count OK 100 100 20 483 N.A.
    5 Reallocated Sector Count OK 100 100 36 0 N.A.
    7 Seek Error Rate OK 60 57 30 326481300696 N.A.
    9 Power On Time OK 98 98 0 1759 N.A.
    10 Spin Retry Count OK 100 100 97 0 N.A.
    12 Power Cycle Count OK 99 99 20 1457 N.A.
    187 Reported Uncorrectable Errors OK 94 94 0 6 N.A.
    189 High Fly Writes OK 100 100 0 0 N.A.
    190 Temperature Difference from 100 OK 54 42 45 789905454 N.A.
    194 Temperature OK 46 58 0 46 C N.A.
    195 Hardware ECC Recovered OK 63 59 0 152152835 N.A.
    197 Current Pending Sector Count OK 100 100 0 0 N.A.
    198 Uncorrectable Sector Count OK 100 100 0 0 N.A.
    199 UltraDMA CRC Error Count OK 200 200 0 0 N.A.
    200 Write Error Count OK 100 253 0 0 N.A.
    202 Data Address Mark Errors OK 100 253 0 0 N.A.

    Dodano po 26 [minuty]:

    Sata byl ustawiony w biosie jako IDE, zmienilem na RAID zainstalowalem sterownik i jest prawie dobrze... kopiowanie na poziomie 20 - 40 MB/sec - to nie to samo co 3, choc wydaje mi sie, ze powinno byc znacznie wiecej...

    0
  • #4 14 Lip 2011 19:19
    helmud7543
    Poziom 42  

    Więcej raczej nie wyciśniesz... Poczekaj jednak jeszcze, może ktoś się wypowie.

    0
  • #5 14 Lip 2011 22:16
    Quamis
    Poziom 20  

    Zapomnialem dodac, ze ta sytuacja wystepuje na Win XP, na 7 wszystko gra i z tymi samymi dyskami predkosc kopiowania siega 100 MB/s

    0
  • #6 15 Lip 2011 09:14
    DriverMSG
    Admin grupy komputery

    Odinstaluj PerfectDisk i oba kanały IDE, po czym zrestartuj komputer.

    0
  • #7 15 Lip 2011 09:56
    Quamis
    Poziom 20  

    Na IDE mam podpiety DVD, wiec jeden i tak musialem zostawic, a po odinstalowaniu perfectdiska (i tak mialem go wywalonego z autostartu, a uslugi uruchamiane recznie) nie poprawilo sie. Transfer pomiedzy 20 a 40 MB/s. Sprobuje wylaczyc kanal z DVD

    0
  • #9 15 Lip 2011 10:20
    Quamis
    Poziom 20  

    Zainstalowalem te same. Problem zniknal po zainstalowaniu zewnetrznego kontrolera SATA, wychodzi na to, ze kontroler na plycie zamulal procesor... teraz kopiowanie to minimum 50 MB/s

    0