Witam, przeszukałem forum, ale niestety nie znalazłem odpowiedzi na moje pytanie. Czy w tym modelu istnieje możliwość sprawdzenia ilości już wydrukowanych stron?
Wchodząc w maintenance wpisz 77 - dostaniesz wydruk gdzie w pozycji 20 masz liczbę wydrukowanych stron oraz wiele innych informacji o urządzeniu
Opis maintenance 77 :
Real-time clock (RTC) check result
RTC backup check result (not required for servicing)
Model code
Country code (See Appendix 3.)
Checksum of WSW, PSW, USW, and FSW (not required for servicing)
Version and production date of main firmware
Version and production date of sub firmware
Version and production date of boot firmware
9-59 Confidential
Serial number of the machine
Head property code
CIS type/Engine type/LCD type
Version of cordless handset (Internal host/firmware/CP)
(only for models with a cordless handset)
PictBridge information (only for models supporting PictBridge)
Ink drop count, indicating how many droplets have been jetted out from each of the
current ink cartridges (including droplets used for purging)
Ink drop count after detection of "Ink Low," indicating how many droplets have been
jetted out from each of the current ink cartridges after detection of "Ink Low"
Ink drop count, indicating how many droplets have been jetted out from each of the ink
cartridges onto the platen in borderless printing
Total ink drop count, indicating how many droplets the machine has jetted out from each
of the ink cartridges since produced (excluding droplets used for purging)
Ink cartridge change count
Left: Bundled ink cartridges
Right: Supply ink cartridges
Ink cartridge detection failure count, indicating how many times an undetectable
cartridge has been inserted
Total printed page count (since the machine was produced)/Total jam count
Printed page count for copy, PC print, memory card, fax & list print
ADF scanning page count/Flat-bed scanning page count/ADF jam count
Home positioning error code of the CIS unit/Home positioning detection log data
Only for DCPJ140W
Purge count/Wiper count/Flushing count, since the machine was produced
Purge count by purge type (automatic/manual)
eIP: Engine setup purge count
uIP: Initial purge count
RP: Periodical reset purge count
SRP: Small reset purge count
SP: Periodical suction purge count
RP2: Periodical vent purge count
CP: Ink cartridge replacement purge count
NP: Normal purge count
RP3: User reset purge count
PP: Power reset purge count
QPP: Power purge count
tFL: Periodical flushing count (only after color printing)
Printed page count for paper sizes and types
Plain paper-Inkjet paper-Glossy paper for each of A3/A4/4x6/L
Total printed page count in duplex printing/Jam count in duplex printing/Paper pull-in
rollers (paper pick-up rollers) cleaning count in duplex printing
(This item is printed, but not required for servicing.)
Total copy page count in duplex printing//Total PC print count in duplex printing
(This item is printed, but not required for servicing.)
Printed page count for paper sizes and paper types in duplex printing
A4: Plain paper only
4 x 6: Plain paper - Inkjet paper
(This item is printed, but not required for servicing.)
Total power-ON time
Machine error history
Communications error history
9-60 Confidential
Base ID/Cordless handset 1 ID/Cordless handset 2 ID/Cordless handset 3 ID/Cordless
handset 4 ID
(only for models with cordless handset)
Initial purge log
Machine information backup file version (See Function code 46.)
Sensor status (See Function code 32 for sensor names.)
Ink cartridge type loaded in each slot
0: No cartridge loaded
1: Bundled cartridge
2: Supply cartridge
*: Unidentifiable ink cartridge
Not required for servicing
Not required for servicing
Timing info and damage info when Error EC has occurred
T: Timing info
(0: No error, 1: Error at the start of operation, 2: Error during usual operation)
E: Expected value of information read
R: Damaged value of information read
Reset count*/Power-ON duration at the time of last reset
*Excluding the resets triggered by the following
Function codes 01 and 91
Function code 80 (Resetting the purge and flushing counts)
Maintenance 80 jest również potężnym źródłem wiedzy :
00:00 00:00 OK RTC backup check (not required for servicing)
(Not shown on DCP)
8CA*** Model code
COUNTRY: Country code (See Appendix 3.)
SWITCH: Checksum of WSW, PSW, USW, and FSW (not required for servicing)
MAIN: Version and production date of main firmware
******** Checksum of main firmware
P**** Version and production date of sub firmware
B**** Version and production date of boot firmware
CLBS IH: Version of cordless handset’s internal host (not required for servicing)
(Shown only on models with a cordless handset)
CLBS FW: Version of cordless handset firmware
(Shown only on models with a cordless handset)
CLBS CP: Version of cordless handset’s communications package (not required
for servicing)
(Shown only on models with a cordless handset)
USB:*1 Serial number of the machine
ALR**** Head property code
CIS:*2 CIS type (Function code 59)
ENGINE: Engine type (not required for servicing)
PICTBRIDGE:*3 PictBridge information
(Shown only on models supporting PictBridge/USB flash memory
drive)
DOT K:*4 Ink drop count, indicating how many droplets have been jetted out from
each of the ink cartridges (including droplets used for purging)
SEN K:*4 Ink drop count after ink near-empty, indicating how many droplets have
been jetted out from each of the ink cartridges after the ink empty
sensor detects near-empty
PLA K:*4 Ink drop count, indicating how many droplets have been jetted out onto
the platen in borderless printing
9-63 Confidential
LK:*4 Total ink drop count, indicating how many droplets the machine has
jetted out from each of the ink cartridges since produced
(excluding droplets used for purging)
INK CH BK:*4 Ink cartridge change count (Bundled cartridge)
INK CH2 BK:*4 Ink cartridge change count (Supply cartridge)
CHGMISS_BK:*4 Ink cartridge change count, indicating how many times an unauthorized
cartridge has been inserted
JAM: Jam count, indicating how many times a paper jam has occurred.
PAGE: Total printed page count, indicating how many pages have been printed
since the machine was produced
PC: PC print page count, indicating how many pages the machine has
printed as an output device of the connected PC
COLORCOPY: Color copy page count, indicating how many copies in color have been
made
MONOCOPY: Black copy page count, indicating how many copies in monochrome
have been made
MEDIA: Memory card print page count, indicating how many pages have been
printed from the memory card data (On models without PhotoCapture
Center, this counter is always fixed at "0.")
FAX: FAX page count, indicating how many received FAX pages have been
printed (Shown on MFC only)
PURGE: Purge count, indicating how many times the purge operation has been
carried out
eIP_BK:*5 Purge history for purge types of black ink
eIP_CL:*5 Purge history for purge types of color inks
WIPE: Wiper count, indicating how many times the wiper operation has been
carried out
FLUSH: Flushing count, indicating how many times the flushing operation has
been carried out
A3P:*6 Print history for paper sizes and types
DX_JAM: Jam count in duplex printing
DX_P: Total page count in duplex printing, indicating how many pages have
been printed in duplex printing since the machine was produced
DX_CLEAN: Paper pull-in rollers (paper pick-up rollers) cleaning count in duplex
printing
DX_PC: PC print page count in duplex printing, indicating how many pages the
machine has printed as an output device of the connected PC
DX_COLORCOPY: Color copy page count in duplex printing, indicating how many copies
have been made in color
DX_MONOCOPY: Black copy page count in duplex printing, indicating how many copies
have been made in monochrome
DX_A4P:*7 Total A4 page count in duplex printing, indicating how many A4 pages
have been printed since the machine was produced
POWER: Total power-ON time
MACHINE_ERR_1*8 Machine error history
ADF_JAM: ADF paper jam count, indicating how many times a paper jam has
occurred (Shown on models with ADF)
ADF: ADF page count, indicating how many pages the ADF has fed
(Shown on models with ADF)
FB: Flat-bed page count, indicating how many documents have been
scanned
HP_ERR_CODE:*9 Home positioning error code of CIS unit (Latest error)
Only for DCPJ140W
9-64 Confidential
After all of the log information items above are displayed, pressing the Black Start (Mono
Start) key returns the screen to the calendar clock in step (1) above.
(3) To stop this operation and return the machine to the initial stage of the maintenance mode,
press the Stop/Exit key.
In the following notes, the OK key is used. For models having no OK key on the control panel,
use the Photo Capture key instead of the OK key.
*1 DCPJ140W "S/N:" appears instead of "USB:."
With the S/N being displayed, pressing the OK key toggles between the following two
indications.
Machine serial number change procedure
The serial number of the machine can be changed with the following procedure.
Models with numerical keypad:
1) With the serial number being displayed, press the OK key and then press the 9, 4, 7 and 5
keys in this order.
The uppermost digit of the current serial number flashes.
2) Enter the uppermost digit of the desired serial number with numerical keys, then press
the key to move the cursor to the next lower digit. In the same way, enter the
remaining 14 digits.
HP_LOG1:*10 Home positioning detection log data (Byte 0 to 3 of 16 bytes)
Only for DCPJ140W
COMERR1:*11 Communications error history
CLID0: Base ID code
(Shown on models with a cordless handset)
CLID1: ID code of cordless handset 1
(Shown on models with a cordless handset)
CLID2: ID code of cordless handset 2
(Shown on models with a cordless handset)
CLID3: ID code of cordless handset 3
(Shown on models with a cordless handset)
DCLPN: PIN code of cordless handset
(Shown on European models with a cordless handset)
BACKUP VER: Backup data file version of machine information (Function code 46)
RESET COUNT*12 Reset count
