Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Samsung 500GB prosze o opinie na podstawie logu z partedmagic

edek004 19 Sty 2012 15:39 965 2
  • #1 19 Sty 2012 15:39
    edek004
    Poziom 7  

    Niedawno zaczely mi sie problemy z dyskiem (brak dostepu do plikow, zawieszanie programow, miarowe stuki oraz bardzo glosna praca). Zrobilem SMART przy pomocy partedmagic. Prosze o opinie i ewntualne rady co do naprawy.

    Cytat:

    smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.1.0-pmagic] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

    === START OF INFORMATION SECTION ===
    Model Family: SAMSUNG SpinPoint T166
    Device Model: SAMSUNG HD501LJ
    Serial Number: S0MUJDWQ352138
    LU WWN Device Id: 5 0000f0 0db352138
    Firmware Version: CR100-13
    User Capacity: 500,107,862,016 bytes [500 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: ATA-8-ACS revision 3b
    Local Time is: Thu Jan 19 14:22:04 2012 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x80) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: ( 9412) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 160) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 122
    3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 7424




    4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4480
    5 Reallocated_Sector_Ct 0x0033 088 088 010 Pre-fail Always - 113
    7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6139
    10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
    11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2190
    13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 17281856
    187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1706824
    188 Command_Timeout 0x0032 100 100 000 Old_age Always - 20
    190 Airflow_Temperature_Cel 0x0022 059 051 000 Old_age Always - 41
    194 Temperature_Celsius 0x0022 112 091 000 Old_age Always - 42
    195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 17281856
    196 Reallocated_Event_Count 0x0032 088 088 000 Old_age Always - 113
    197 Total_Pending_Sectors 0x0012 089 089 000 Old_age Always - 103
    198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
    201 Soft_Read_Error_Rate 0x000a 096 096 000 Old_age Always - 112
    202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 4

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed: read failure 90% 6137 53537839
    # 2 Short offline Completed: read failure 90% 6136 53537839
    # 3 Short offline Completed: read failure 90% 6131 53537839

    Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    P.S. Przepraszam za brak polskich ogonkow ale pisze bezposrednio z live i nie mam czasu aby szukac gdzie to zmienic

    0 2
  • Pomocny post
    #2 19 Sty 2012 16:15
    linuks
    Spec od komputerów

    Relokowane sektory.Dysk do wymiany.

    0
  • #3 20 Sty 2012 03:29
    edek004
    Poziom 7  

    Dzięki za szybką odpowiedź. Widzę, że Samsung przestanie być moim przyjacielem :) Kolejny sprzęt który padł kilka miesięcy po zakończeniu gwarancji...

    0