Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

5130XM - Wgranie ppm'a z 5310, i błąd phoenixa (Pilne)

xardas97 29 Lut 2012 19:22 1028 4
  • #1 29 Lut 2012 19:22
    xardas97
    Poziom 20  

    Witam. Oto log

    Code:
    Flashing started
    
    Creating product data items list
    Product data items list created
    Backing up data items
    Backing up data items
    Getting Data Package
    Reading product state
    Initializing datafile
    DataItem "ProductProfile" version "1.1" set to defaults, skipping backup
    DataItem "ISSVariantActivator" version "1.0" set to defaults, skipping backup
    Starting backup/restore sub-procedure: mode change post delay
    mode change post delay
    mode change post delay
    Starting backup/restore sub-procedure: data item pre-delay
    data item pre-delay
    data item pre-delay
    Sub-procedure completed: Succeeded., result code: 0
    Starting to backup/restore data item: File2Files, version: 1.0
    Data Item backup/restore completed: Succeeded., result code: 0
    Starting backup/restore sub-procedure: data item post-delay
    data item post-delay
    data item post-delay
    Sub-procedure completed: Succeeded., result code: 0
    Starting backup/restore sub-procedure: data item pre-delay
    data item pre-delay
    data item pre-delay
    Sub-procedure completed: Succeeded., result code: 0
    Starting to backup/restore data item: Certificates, version: 1.0
    Data Item backup/restore completed: Succeeded., result code: 0
    Starting backup/restore sub-procedure: data item post-delay
    data item post-delay
    data item post-delay
    Sub-procedure completed: Succeeded., result code: 0
    Backup/restore result: 0 out of 4 items were not backed up
    Backup complete
    Started product mode change
    Product mode change complete
    Flashing phone
    Initializing
    Verifying communication to device...
    Getting product info...
    PN_PERMANENT_DATA server reported page size 128 KB.
    Scanning image files...
    AdlServer: Flashing Update Server Data: 308032 bytes
    AdlServer: Flashing CMT UPS data 1%
    AdlServer: Flashing CMT UPS data 11%
    AdlServer: Flashing CMT UPS data 21%
    AdlServer: Flashing CMT UPS data 31%
    AdlServer: Flashing CMT UPS data 41%
    AdlServer: Flashing CMT UPS data 50%
    AdlServer: Flashing CMT UPS data 60%
    AdlServer: Flashing CMT UPS data 70%
    AdlServer: Flashing CMT UPS data 80%
    AdlServer: Flashing CMT UPS data 90%
    AdlServer: Flashing CMT UPS data 100%
    AdlServer: UPS data loaded
    AdlServer: Update Server code succesfully sent to phone
    Asic CMT: Verifying communication to device...
    Asic CMT: Verifying communication to device...
    Asic CMT: Start programming 22723 KB...
    Asic CMT: Erasing rm495__07.95.mcusw
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing area 2...
    Asic CMT: Erasing area 3...




    Asic CMT: Erasing area 4...
    Asic CMT: Erasing area 5...
    Asic CMT: Erasing area 6...
    Asic CMT: Erasing rm303_ beta_10.10.ppm_b
    Asic CMT: Erasing area 1...
    Asic CMT: Programming rm495__07.95.mcusw
    Asic CMT: Programming  0%
    Asic CMT: Programming  2%
    Asic CMT: Programming  4%
    Asic CMT: Programming  6%
    Asic CMT: Programming  8%
    Asic CMT: Programming  10%
    Asic CMT: Programming  12%
    Asic CMT: Programming  14%
    Asic CMT: Programming  16%
    Asic CMT: Programming  18%
    Asic CMT: Programming  20%
    Asic CMT: Programming  22%
    Asic CMT: Programming  24%
    Asic CMT: Programming  26%
    Asic CMT: Programming  28%
    Asic CMT: Programming  30%
    Asic CMT: Programming  32%
    Asic CMT: Programming  34%
    Asic CMT: Programming  36%
    Asic CMT: Programming  38%
    Asic CMT: Programming  40%
    Asic CMT: Programming  42%
    Asic CMT: Programming  44%
    Asic CMT: Programming  46%
    Asic CMT: Programming  48%
    Asic CMT: Programming  50%
    Asic CMT: Programming  52%
    Asic CMT: Programming  54%
    Asic CMT: Programming  56%
    Asic CMT: Programming  58%
    Asic CMT: Programming  60%
    Asic CMT: Programming  62%
    Asic CMT: Programming  64%
    Asic CMT: Programming  66%
    Asic CMT: Programming  68%
    Asic CMT: Programming  70%
    Asic CMT: Programming  72%
    Asic CMT: Programming  74%
    Asic CMT: Programming  76%
    Asic CMT: Programming  78%
    Asic CMT: Programming  80%
    Asic CMT: Programming rm303_ beta_10.10.ppm_b
    Asic CMT: Programming  82%
    Asic CMT: Programming  84%
    Asic CMT: Programming  86%
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4B.
    ADL LDR: Error sending ADL_LDR_WRITE_DATA_REQ size 0xC000
    ADL LDR: Error sending write message...
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Resending Prepare for Write Request....
    Error: ADL Loader reported an Invalid Sequence error when sending message 0x4C.
    ADL LDR: Error writing to target address 0x0137C000, Size 0x0000C000
    Asic CMT: ERROR Programming rm303_ beta_10.10.ppm_b Block 89. Unable to continue flashing.
    Asic CMT: Error in sending data from rm303_ beta_10.10.ppm_b.
    Protocol 1: Error during Flashing. Unable to continue.
    Unable to flash phone 0x84012283
    Starting to recover the phone
    Recoverying phone
    Initializing
    Scanning image files...
    Asic CMT: Verifying communication to device...
    Waiting for USB device...
    Boot rom detected. Continuing flashing...
    Loading secondary boot code: 14592 bytes
    Secondary boot loaded
    Loading update server code: 308032 bytes
    Update server loaded
    Asic CMT: Verifying communication to device...
    UPS flashed and initialized. Continuing flashing...
    Asic CMT: Verifying communication to device...
    Asic CMT: Start programming 22723 KB...
    Asic CMT: Erasing rm495__07.95.mcusw
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing area 2...
    Asic CMT: Erasing area 3...
    Asic CMT: Erasing area 4...
    Asic CMT: Erasing area 5...
    Asic CMT: Erasing area 6...
    Asic CMT: Erasing rm303_ beta_10.10.ppm_b
    Asic CMT: Erasing area 1...
    Asic CMT: Programming rm495__07.95.mcusw
    Asic CMT: Programming  0%
    Asic CMT: Programming  2%
    Asic CMT: Programming  4%
    Asic CMT: Programming  6%
    Asic CMT: Programming  8%
    Asic CMT: Programming  10%
    Asic CMT: Programming  12%
    Asic CMT: Programming  14%
    Asic CMT: Programming  16%
    Asic CMT: Programming  18%
    Asic CMT: Programming  20%
    Asic CMT: Programming  22%
    Asic CMT: Programming  24%
    Asic CMT: Programming  26%
    Asic CMT: Programming  28%
    Asic CMT: Programming  30%
    Asic CMT: Programming  32%
    Asic CMT: Programming  34%
    Asic CMT: Programming  36%
    Asic CMT: Programming  38%
    Asic CMT: Programming  40%
    Asic CMT: Programming  42%
    Asic CMT: Programming  44%
    Asic CMT: Programming  46%
    Asic CMT: Programming  48%
    Asic CMT: Programming  50%
    Asic CMT: Programming  52%
    Asic CMT: Programming  54%
    Asic CMT: Programming  56%
    Asic CMT: Programming  58%
    Asic CMT: Programming  60%
    Asic CMT: Programming  62%
    Asic CMT: Programming  64%
    Asic CMT: Programming  66%
    Asic CMT: Programming  68%
    Asic CMT: Programming  70%
    Asic CMT: Programming  72%
    Asic CMT: Programming  74%
    Asic CMT: Programming  76%
    Asic CMT: Programming  78%
    Asic CMT: Programming  80%
    Asic CMT: Programming rm303_ beta_10.10.ppm_b
    Asic CMT: Programming  82%
    Asic CMT: Programming  84%
    Asic CMT: Programming  86%
    ADL LDR: Error sending ADL_LDR_WRITE_DATA_REQ size 0xC000
    ADL LDR: Error sending write message...
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Error writing to target address 0x0137C000, Size 0x0000C000
    Asic CMT: ERROR Programming rm303_ beta_10.10.ppm_b Block 89. Unable to continue flashing.
    Asic CMT: Error in sending data from rm303_ beta_10.10.ppm_b.
    Protocol 1: Error during Flashing. Unable to continue.
    Unable to flash phone 0x84012283
    Starting to recover the phone
    Recoverying phone
    Initializing
    Scanning image files...
    ERROR: Unable to detect device 0x8401F145. Check USB connection
    Waiting for USB device...
    Boot rom detected. Continuing flashing...
    Loading secondary boot code: 14592 bytes
    Secondary boot loaded
    Loading update server code: 308032 bytes
    Update server loaded
    Asic CMT: Verifying communication to device...
    UPS flashed and initialized. Continuing flashing...
    Asic CMT: Verifying communication to device...
    Asic CMT: Start programming 22723 KB...
    Asic CMT: Erasing rm495__07.95.mcusw
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing area 2...
    Asic CMT: Erasing area 3...
    Asic CMT: Erasing area 4...
    Asic CMT: Erasing area 5...
    Asic CMT: Erasing area 6...
    Asic CMT: Erasing rm303_ beta_10.10.ppm_b
    Asic CMT: Erasing area 1...
    Asic CMT: Programming rm495__07.95.mcusw
    Asic CMT: Programming  0%
    Asic CMT: Programming  2%
    Asic CMT: Programming  4%
    Asic CMT: Programming  6%
    Asic CMT: Programming  8%
    Asic CMT: Programming  10%
    Asic CMT: Programming  12%
    Asic CMT: Programming  14%
    Asic CMT: Programming  16%
    Asic CMT: Programming  18%
    Asic CMT: Programming  20%
    Asic CMT: Programming  22%
    Asic CMT: Programming  24%
    Asic CMT: Programming  26%
    Asic CMT: Programming  28%
    Asic CMT: Programming  30%
    Asic CMT: Programming  32%
    Asic CMT: Programming  34%
    Asic CMT: Programming  36%
    Asic CMT: Programming  38%
    Asic CMT: Programming  40%
    Asic CMT: Programming  42%
    Asic CMT: Programming  44%
    Asic CMT: Programming  46%
    Asic CMT: Programming  48%
    Asic CMT: Programming  50%
    Asic CMT: Programming  52%
    Asic CMT: Programming  54%
    Asic CMT: Programming  56%
    Asic CMT: Programming  58%
    Asic CMT: Programming  60%
    Asic CMT: Programming  62%
    Asic CMT: Programming  64%
    Asic CMT: Programming  66%
    Asic CMT: Programming  68%
    Asic CMT: Programming  70%
    Asic CMT: Programming  72%
    Asic CMT: Programming  74%
    Asic CMT: Programming  76%
    Asic CMT: Programming  78%
    Asic CMT: Programming  80%
    Asic CMT: Programming rm303_ beta_10.10.ppm_b
    Asic CMT: Programming  82%
    Asic CMT: Programming  84%
    Asic CMT: Programming  86%
    ADL LDR: Error sending ADL_LDR_WRITE_DATA_REQ size 0xC000
    ADL LDR: Error sending write message...
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Resending Prepare for Write Request....
    ADL LDR: Error writing to target address 0x0137C000, Size 0x0000C000
    Asic CMT: ERROR Programming rm303_ beta_10.10.ppm_b Block 89. Unable to continue flashing.
    Asic CMT: Error in sending data from rm303_ beta_10.10.ppm_b.
    Protocol 1: Error during Flashing. Unable to continue.
    Unable to flash phone 0x84012283
    Starting to recover the phone
    Recoverying phone
    Initializing
    Scanning image files...
    ERROR: Unable to detect device 0x8401F145. Check USB connection
    Waiting for USB device...
    Boot rom detected. Continuing flashing...
    Loading secondary boot code: 14592 bytes
    Secondary boot loaded
    Loading update server code: 308032 bytes
    Update server loaded
    Asic CMT: Verifying communication to device...
    UPS flashed and initialized. Continuing flashing...
    Asic CMT: Verifying communication to device...
    Asic CMT: Start programming 22723 KB...
    Asic CMT: Erasing rm495__07.95.mcusw
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing area 2...
    Asic CMT: Erasing area 3...
    Asic CMT: Erasing area 4...
    Asic CMT: Erasing area 5...

    Wpadłem na pomysł dania ppma od 5310, reszta jak powinna być, wgrywam v.7.95, telefon cały czas jest pod kablem. Restartuje, i jest ten błąd. Co mam zrobić...? Nie mam boxa, a jutro musze mieć sprawny telefon..

    0 4
  • #2 29 Lut 2012 19:35
    rekordgsm
    Poziom 31  

    Jakim cudem chcesz wgrać a nawet gdyby żeby Ci działa nokia 5130 z PPM od nokii 5310 ? W czym problem żeby wgrać całego flasha od 5130 ?

    0
  • #3 29 Lut 2012 19:37
    xardas97
    Poziom 20  

    W tym, że ten ppm był "tuningowy" - zupełnie inny. Racja, głupote zrobiłem, ale jak teraz wgrać oryginalnego?

    0
  • Pomocny post
    #4 29 Lut 2012 19:41
    rekordgsm
    Poziom 31  

    PPM to pliki z pakietem językowym to co tam miałoby niby być stunigowanego ? Nieważne, wrzucaj poprawnego flasha do modelu który masz, jak nie masz ściągnij z NaviFirm najwyższą wersję.

    0
  • #5 29 Lut 2012 19:42
    xardas97
    Poziom 20  

    Dobra, idzie refubrishem jak odead usb
    A co do pomysłu wgrania ppma od 5310, to to był głupi pomysl, i źle sie wyraźiłem, to nie miał być tutning tylko mała przeróbka, a nie wyszło. zresztą nic dziwnego
    Edit: Posżło, chodzi. Dzieki za pomoc.

    0