Elektroda.pl
Elektroda.pl
X
Please add exception to AdBlock for elektroda.pl.
If you watch the ads, you support portal and users.

Probably caused by : ntkrnlmp.exe

zerr10 07 May 2013 02:59 2106 2
  • #1
    zerr10
    Level 8  
    Przepraszam wyjaśni mi ktoś czego dotyczy problem tylko mam nadzieję że to nowe sterowniki amd albo wina systemu a nie znowu sprzętu bo już raz wrócił mi z naprawy a kompa mam od 6 miesięcym ostatnio grałem w crysis 3 i bum blue screen w 2 misji (Dżungla ) aż musiałem zmniejszyć detale na średnio -niskie, pomogło dodam iż grałem trochę w resident evil 6 który ma podobne wymogi a jednak nie było blue screena ani innych problemów wymagania gra ale żeby odrazu blue screena na szczęście rzadnych tym razem anomali graficznych jak ostatnio bo bym nie wytrzymał eee te kompy proszę o pomoc :


    Code: text
    Log in, to see the code

    Mój sprzęt to : procesor : 4x 3,0 amd black A8 3870 APU , RAMY : 1X 8 GB GEL GOOD RAM CZY JAKOŚ TAK Taktowanie pamięci 1600 Mhz tyle mam ustawione i chodzi, wcześniej miałem 2x po 4 ale mi wymienili, dysk SATA 3 500 GB , karta HD RADEON 6550D 512 MB tyle pisze w biosie jest to max. i z auto ustawiłem właśnie na tyle . karta jest zintegrowana czy to jest normalne w takich kartach że takie rzeczy się dzieją ? chyba znowu mi nie pada ram po 5 miesiącach bo nie wyrobie towar z Warszawy chyba się rozpłacze miałem kompa z 1,2 GHz i ramami ssdram 512 i dyskiem z 70 GB oraz kartą radeon 128 i on chodzi do dnia dzisiejszego a z tym nowym jakoś problemy....

    Proszę poprawić błędy pisowni w swoich wypowiedziach! Niewykonanie polecenia nagrodzę ostrzeżeniem. 3.1.13. (Zabronione jest publikowanie wpisów naruszających zasady pisowni języka polskiego, niedbałych i niezrozumiałych. [DriverMSG]

    MARKOWY wysokiej klasy zasilacz
    450W z cichym 12 cm wentylatorem
    oraz filtrami PFC i EMI


    Bardzo cichy, z filtrem PFC, 12cm FAN
    ROHS , filtry przeciwprzepięciowe i filtrujące,
    Zasilacz ATX do obudowy komputerowej: - max moc zasilacza 450W - ultra cichy wentylator 120 mm - zabezpieczenia przeciwzakłóceniowe i przeciwprzepięciowe - wymagany prawem certyfikat "CE" - filtry EMI oraz PFC - 3x złącze MOLEX - 1x złącze FDD - 1x złacze EPS 4pin - 2x złącze SATA - 1x złącze pin 20+4 -

    tzw. teraz są takie dobre karty zintegrowane APU z Prockiem że da się grać w dość wymagające Gry no ale crysis.. to się chyba nie dziwie porównując tę grę
    do Re6 to jest tylko taka różnica że crysis 3 wymaga dx11 no ale martwi mnie ten ten blue screen gra chodzi płynnie szczególnie na pierwszym poziomie no ale na drugim to już miewałem zacięcia ale lekkie wystarczyło troche zmniejszyć grafike najwyraźniej ten dx11 dużo bieże FPS i bardzo ale to bardzo obciąża karte ale przecież jak ta karta obsługuje dx11 to mogła by przynajmniej powodowac przycięcia a nie odrazu blue screen a nie gra chodzi płynnie po chwili małe zacięcie i bum zamarznięty ekran, włąściwie teraz jak mam na niskich to jakoś chodzi po prostu za dużo jest tam efektów na raz i myśle że rzeczywiście karta ( Radeon hd6550D 512 MB ) nie ogarnia szczególnie te wybuchy w tej dżungli , nawet wiedźmin 2 chodzi mi na ultra płynnie no dobra tylko 1 opcję muszę wyłączyć a przecież też wymaga 1 gb karty.

    a dokładniej mam ten komputer : http://allegro.pl/super-a8-3870k-black-8gb-hd6550d-4gb-hdmi-1000gb-i3208132211.html

    tyle że 500 GB Dysk.
  • #2
    rtj71
    IT specialist
    Oprócz tego co napisał Moderator:

    Podaj pełną specyfikację komputera wraz z uwzględnieniem marki i modelu zasilacza.

    Karta którą posiadasz nie nadaje się do gier, nie wiem jak Ty na tym grałeś w Crysisa 3, ale nie o tym jest temat: za mało informacji żeby cokolwiek stwierdzić, uzupełnij post o wspomniane elementy (a przedtem go popraw albo najlepiej napisz od początku).
  • #3
    zerr10
    Level 8  
    Jezu Pomorze Ktoś Bo mnie ten bs wykończy czy to może być wina Windowsa ?

    Dodano po 33 [minuty]:

    Jeszcze raz wstawiam Analizę tym razem bardziej rozwiniętą :

    Microsoft (R) Windows Debugger Version 6.10.0003.233 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [F:\MEMORY.DMP]
    Kernel Summary Dump File: Only kernel address space is available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlmp.exe -
    Windows 7 Kernel Version 7600 MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
    Machine Name:
    Kernel base = 0xfffff800`02a55000 PsLoadedModuleList = 0xfffff800`02c92e50
    Debug session time: Sat May 11 17:30:33.965 2013 (GMT+2)
    System Uptime: 0 days 0:07:14.978
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlmp.exe -
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ................
    Loading User Symbols

    Loading unloaded module list
    ....
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 101, {31, 0, fffff88002fd5180, 3}

    *** ERROR: Symbol file could not be found. Defaulted to export symbols for hal.dll -
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Probably caused by : ntkrnlmp.exe

    Followup: MachineOwner
    ---------

    0: kd> !analyze -v
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in an
    MP system within the allocated interval. This indicates that the specified
    processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000031, Clock interrupt time out interval in nominal clock ticks.
    Arg2: 0000000000000000, 0.
    Arg3: fffff88002fd5180, The PRCB address of the hung processor.
    Arg4: 0000000000000003, 0.

    Debugging Details:
    ------------------

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************

    MODULE_NAME: nt

    FAULTING_MODULE: fffff80002a55000 nt

    DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600

    BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_4_PROC

    DEFAULT_BUCKET_ID: WRONG_SYMBOLS

    CURRENT_IRQL: 0

    STACK_TEXT:
    fffff880`033164c8 fffff800`02a73443 : 00000000`00000101 00000000`00000031 00000000`00000000 fffff880`02fd5180 : nt!KeBugCheckEx
    fffff880`033164d0 fffff800`02acf5f7 : 00000000`00000000 fffff800`00000003 00000000`00002710 fffff800`02bf64b1 : nt!FsRtlAllocateFileLock+0x14b
    fffff880`03316560 fffff800`02a16895 : fffff800`02a3b460 fffff880`03316710 fffff800`02a3b460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
    fffff880`03316660 fffff800`02ac33f3 : 00000000`4d1e0964 fffff800`02c3fe80 00000000`00000000 00000000`00000000 : hal!HalReturnToFirmware+0xb2d
    fffff880`03316690 fffff800`02afc59b : fffff880`00000000 fffff880`00000001 00000000`00000000 fffff800`00000000 : nt!KeSynchronizeExecution+0xce3
    fffff880`03316820 fffff800`02ad4e2c : 00000000`00000000 00000000`00006458 00000000`00000000 fffff800`02c54888 : nt!PsReturnProcessPagedPoolQuota+0x1bd7
    fffff880`03316860 fffff800`02adaf70 : 00000000`00006458 00000000`00000001 00000000`00000000 00000000`00006457 : nt!KeSetTimerEx+0x2ac
    fffff880`03316930 fffff800`02b47a0e : fffff800`02c51b40 fffff880`00000001 00000000`00000001 fffff880`03316bb0 : nt!KeAcquireQueuedSpinLock+0x187c
    fffff880`03316ae0 fffff800`02adb6e2 : 00000000`000001a8 00000000`00000000 fffffa80`00000000 00000000`00000003 : nt!wcsncat_s+0x30226
    fffff880`03316b80 fffff800`02adb96f : 00000000`00000008 fffff880`03316c10 00000000`00000001 fffffa80`00000000 : nt!KeDetachProcess+0x1a2
    fffff880`03316bd0 fffff800`02d6a166 : fffffa80`06712680 00000000`00000080 fffffa80`066ed450 00000000`00000001 : nt!KeDetachProcess+0x42f
    fffff880`03316d40 fffff800`02aa5486 : fffff880`02f64180 fffffa80`06712680 fffff880`02f6efc0 00001b94`30000014 : nt!PsCreateSystemThread+0x6e2
    fffff880`03316d80 00000000`00000000 : fffff880`03317000 fffff880`03311000 fffff880`03316710 00000000`00000000 : nt!KeTestAlertThread+0x956


    STACK_COMMAND: .bugcheck ; kb

    FOLLOWUP_NAME: MachineOwner

    IMAGE_NAME: ntkrnlmp.exe

    BUCKET_ID: WRONG_SYMBOLS

    Followup: MachineOwner

    Dodano po 6 [minuty]:

    Sprzęt :

    Procesor AMD 4x 3,0 GHz

    Ram - 8GB Gel Good Ram

    Dysk 500 GB Sata3

    Karta Zintegrowana Hd Radeon 6550D 512MB

    MARKOWY wysokiej klasy zasilacz
    450W z cichym 12 cm wentylatorem
    oraz filtrami PFC i EMI


    Bardzo cichy, z filtrem PFC, 12cm FAN
    ROHS , filtry przeciwprzepięciowe i filtrujące,
    Zasilacz ATX do obudowy komputerowej: - max moc zasilacza 450W - ultra cichy wentylator 120 mm - zabezpieczenia przeciwzakłóceniowe i przeciwprzepięciowe - wymagany prawem certyfikat "CE" - filtry EMI oraz PFC - 3x złącze MOLEX - 1x złącze FDD - 1x złacze EPS 4pin - 2x złącze SATA - 1x złącze pin 20+4 -