logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

LDG Z11 HF VHF Automatic Antenna Tuner Manual

_PREDATOR_ 11 Maj 2014 11:55 1092 0
REKLAMA
  • #1 13589863
    _PREDATOR_

    VIP Zasłużony dla elektroda
    Marka: LDG
    Model: Z11
    The LDG Z-11 is a QRP tuner that can handle 0.1 to 60 watts (30 continuous) of RF power over the range of 1.8-30 MHz. The Z-11 features high quality design and manufacturing from our circuit boards to the enclosures made by Ten-Tec. The Z-11 QRP Autotuner is based on the AT-11design with attention paid to reducing size and power consumption. The tuner is a high efficiency, microprocessor controlled, switched "L" network designed to work with Dipoles, Verticals, Inverted Vees, Beams or any coax fed antenna in the 1.8 - 30 MHz range. It's small size and weight make it perfect for installing in existing QRP transmitters.

    The Z-11 features latching relays which, once tuned, can be powered off and operated on your selected frequency band with no current draw from your power source. The Z-11 features an autosleep mode which turns itself off for you, tuning is then activated by pressing a button. Click here to view interior. Click here to rear panel. Radio cables are not included (see below).

    Specifications:
    Size 4.4 x 4.3 x 0.6 board, 5.0 x 8.5 x 1.25 enclosure (inches)
    Weight: 4.2 oz.; 15 oz. with enclosure
    Configuration: Switched "L" network
    Inductor range: 20 uH
    Capacitor range: 2700 pf
    Tuning time: 0.1 to 3 seconds, 1.5 average.
    Current consumption: 10 to 190 mA, 75 mA average. Zero current draw once tuned!
    Auto Sleep Mode
    Voltage requirement: 11 to 14 volts
    Microprocessor Controlled
    1.8 - 30.0 MHz Coverage
    Tunes 6 to 800 ohm Loads
    Power Range: 0.1 to 60 watts (30 watts continuous)
    For Dipoles, Verticals, Vees, Beams or any Coax Fed Antenna

    LDG Z11 HF VHF Automatic Antenna Tuner Manual
  • REKLAMA
REKLAMA