Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Prośba o ocenę kondycji dysku

krzysiek99a 16 Gru 2014 22:19 498 2
  • #1 16 Gru 2014 22:19
    krzysiek99a
    Poziom 8  

    Proszę o ocenę stanu dysku, mam dostęp jedynie do narzędzi konsolowych i Linuksa więc zamieszczam informacje które uzyskałem z smartmontools
    Z góry dziękuje za pomoc

    Code:
     === START OF INFORMATION SECTION ===
    
    Model Family:     SAMSUNG SpinPoint F3
    Device Model:     SAMSUNG HD103SJ
    Serial Number:    S246J90B108508
    LU WWN Device Id: 5 0024e9 204356287
    Firmware Version: 1AJ10001
    User Capacity:    1,000,204,886,016 bytes [1.00 TB]
    Sector Size:      512 bytes logical/physical
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   8
    ATA Standard is:  ATA-8-ACS revision 6
    Local Time is:    Tue Dec 16 22:06:34 2014 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status:  (0x00)   Offline data collection activity
                   was never started.
                   Auto Offline Data Collection: Disabled.
    Self-test execution status:      ( 249)   Self-test routine in progress...
                   90% of test remaining.
    Total time to complete Offline
    data collection:       ( 9660) seconds.
    Offline data collection
    capabilities:           (0x5b) SMART execute Offline immediate.
                   Auto Offline data collection on/off support.
                   Suspend Offline collection upon new
                   command.
                   Offline surface scan supported.
                   Self-test supported.
                   No Conveyance Self-test supported.
                   Selective Self-test supported.
    SMART capabilities:            (0x0003)   Saves SMART data before entering
                   power-saving mode.
                   Supports SMART auto save timer.




    Error logging capability:        (0x01)   Error logging supported.
                   General Purpose Logging supported.
    Short self-test routine
    recommended polling time:     (   2) minutes.
    Extended self-test routine
    recommended polling time:     ( 161) minutes.
    SCT capabilities:           (0x003f)   SCT Status supported.
                   SCT Error Recovery Control supported.
                   SCT Feature Control supported.
                   SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       189
      2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
      3 Spin_Up_Time            0x0023   077   070   025    Pre-fail  Always       -       7185
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       156
      5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
      8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
      9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       31578
     10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       170
    191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       7
    192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
    194 Temperature_Celsius     0x0002   057   049   000    Old_age   Always       -       43 (Min/Max 16/52)
    195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
    196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   252   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       12
    223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
    225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       171

    SMART Error Log Version: 1
    ATA Error Count: 14 (device log contains only the most recent five errors)
       CR = Command Register [HEX]
       FR = Features Register [HEX]
       SC = Sector Count Register [HEX]
       SN = Sector Number Register [HEX]
       CL = Cylinder Low Register [HEX]
       CH = Cylinder High Register [HEX]
       DH = Device/Head Register [HEX]
       DC = Device Command Register [HEX]
       ER = Error register [HEX]
       ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 14 occurred at disk power-on lifetime: 28533 hours (1188 days + 21 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 18 20 10 03 e0  Error: UNC 24 sectors at LBA = 0x00031020 = 200736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 40 f8 10 03 e0 08      00:00:00.067  READ DMA
      c8 00 40 20 6c 08 e0 08      00:00:00.067  READ DMA
      c8 00 20 a0 6c 08 e0 08      00:00:00.067  READ DMA
      c8 00 40 a0 57 08 e0 08      00:00:00.067  READ DMA
      c8 00 40 40 67 08 e0 08      00:00:00.067  READ DMA

    Error 13 occurred at disk power-on lifetime: 27375 hours (1140 days + 15 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 80 64 01 e0  Error: UNC 8 sectors at LBA = 0x00016480 = 91264

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 80 64 01 e0 08      01:46:27.309  READ DMA
      27 00 00 00 00 00 e0 08      01:46:27.309  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 08      01:46:27.309  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 08      01:46:27.309  SET FEATURES [Set transfer mode]
      27 00 00 00 00 00 e0 08      01:46:27.309  READ NATIVE MAX ADDRESS EXT

    Error 12 occurred at disk power-on lifetime: 27375 hours (1140 days + 15 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 80 64 01 e0  Error: UNC 8 sectors at LBA = 0x00016480 = 91264

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 80 64 01 e0 08      01:46:27.307  READ DMA
      27 00 00 00 00 00 e0 08      01:46:27.307  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 08      01:46:27.307  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 08      01:46:27.307  SET FEATURES [Set transfer mode]
      27 00 00 00 00 00 e0 08      01:46:27.307  READ NATIVE MAX ADDRESS EXT

    Error 11 occurred at disk power-on lifetime: 27375 hours (1140 days + 15 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 80 64 01 e0  Error: UNC 8 sectors at LBA = 0x00016480 = 91264

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 80 64 01 e0 08      01:46:27.306  READ DMA
      27 00 00 00 00 00 e0 08      01:46:27.306  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 08      01:46:27.306  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 08      01:46:27.306  SET FEATURES [Set transfer mode]
      27 00 00 00 00 00 e0 08      01:46:27.306  READ NATIVE MAX ADDRESS EXT

    Error 10 occurred at disk power-on lifetime: 27375 hours (1140 days + 15 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 05 83 64 01 e0  Error: UNC 5 sectors at LBA = 0x00016483 = 91267

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 80 64 01 e0 08      01:46:27.304  READ DMA
      25 00 80 20 92 04 e0 08      01:46:27.304  READ DMA EXT
      25 00 08 98 29 3d e0 08      01:46:27.304  READ DMA EXT
      c8 00 20 00 63 01 e0 08      01:46:27.304  READ DMA
      ea 00 00 1f 92 04 e0 08      01:46:27.304  FLUSH CACHE EXT

    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%     31577         -

    Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Self_test_in_progress [90% left] (0-65535)
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    0 2
  • #2 16 Gru 2014 23:17
    mati211p
    Specjalista - HDD i odzyskiwanie danych

    Są jakieś niepokojące objawy ze strony dysku? Atrybuty 01 i C8 należy kontrolować, czy nie wzrastają.

    0
  • #3 16 Gru 2014 23:44
    krzysiek99a
    Poziom 8  

    W ciągu ostatnich ok. 2 tygodni 2 razy system znaczą się dziwnie zachowywać ( dziwne problemy z różnymi usługami min. msql) przy próbie restartu podczas uruchamiania pojawiły się informacje o błędach w systemie plików. Konieczne było naprawienie błędów fsck i później system działał już poprawnie. Nie wiem czy ma to związek z dyskiem czy problem leży gdzie indziej ale po prostu szukam przyczyny.

    0
  Szukaj w 5mln produktów