Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

[BSOD] driver_irql_not_less_or_equal tcpip.sys win8

MadHatter666 19 Lut 2015 21:32 465 5
  • #1 19 Lut 2015 21:32
    MadHatter666
    Poziom 2  

    Po zainstalowaniu sterowników do:

    TL-WN727N V4

    nawiedzają mnie bsod'y podczas przeglądania internetu i rozmowy skype.

    PC:
    GeForce 9500gt 1gb
    2gb ram
    Amd Atholn 64 X2 Dual Core Processor 5200+
    Windows 8 64 bit Enterprise
    Asus M2N68-AM SE

    Spoiler:
    *********************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************




    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Probably caused by : hardware

    Followup: MachineOwner
    ---------



    Spoiler:
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 9200 MP (2 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Machine Name:
    Kernel base = 0xfffff800`f3a03000 PsLoadedModuleList = 0xfffff800`f3ccca80
    Debug session time: Thu Feb 19 08:25:29.123 2015 (GMT+1)
    System Uptime: 0 days 0:00:06.937
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ..................................................
    Loading User Symbols
    Mini Kernel Dump does not contain unloaded driver list
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 124, {0, fffffa8002cb88f8, 0, 0}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Probably caused by : hardware

    Followup: MachineOwner
    ---------


    Spoiler:

    Loading Dump File [C:\Windows\Minidump\021715-24538-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 9200 MP (2 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Machine Name:
    Kernel base = 0xfffff802`60818000 PsLoadedModuleList = 0xfffff802`60ae1a80
    Debug session time: Tue Feb 17 09:02:51.608 2015 (GMT+1)
    System Uptime: 0 days 0:00:09.418
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .................................................
    Loading User Symbols
    Mini Kernel Dump does not contain unloaded driver list
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 124, {0, fffffa8002bfd8f8, 0, 0}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Probably caused by : hardware

    Followup: MachineOwner
    ---------

    0 5
  • #2 19 Lut 2015 23:35
    Brodi
    Poziom 28  

    A po kablu śmiga? Jeśli karta wifi nie jest wadliwa to możliwe że zasilacz/płyta ma problem z dużym poborem prądu z usb i stąd bsody. Podaj zasilacz, zrób fotke wnętrza kompa. Na koniec sterowniki, mam nadzieję że nie instalowałeś nic zabytkowego.

    0
  • #3 20 Lut 2015 01:28
    winmap
    Poziom 30  

    Najpierw spróbował bym z inną wersją sterowników.
    Nie wiem czy ten który podałeś jest najnowszy ale gdyby tak to spróbuj starszej wersji a gdyby nie to na odwrót.

    0
  • #4 20 Lut 2015 15:18
    MadHatter666
    Poziom 2  

    Innej wersji sterowników do tego adaptera V4 nie ma.

    Zasilacz Tracer Highlander 450w

    Adapter połączony jest kablem do komputera, spróbuje bez, może to coś zmieni.

    Zdjęcia aktualnie nie mogę wykonać.

    0
  • #5 20 Lut 2015 22:17
    winmap
    Poziom 30  

    Zasilacz z czarnej listy.
    Karta może być wadliwa.
    Przetestował bym pamięć.

    0
  • #6 21 Lut 2015 19:40
    MadHatter666
    Poziom 2  

    Wymieniłem adapter.

    0