logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Błąd przy programowaniu ATMEGA8: invalid device signature, co robić?

komnetsuwalki 26 Lut 2016 22:01 717 2
REKLAMA
  • #1 15473696
    komnetsuwalki
    Poziom 13  
    a u mnie jest taki błąd zastosowałem wszystkie kombinacje i wywala mi to?


    avrdude.exe: set SCK frequency to 2000 Hz
    avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
    avrdude.exe: error: programm enable: target doesn't answer. 1
    avrdude.exe: initialization failed, rc=-1
    avrdude.exe: AVR device initialized and ready to accept instructions
    avrdude.exe: Device signature = 0x000000
    avrdude.exe: Yikes! Invalid device signature.
    avrdude.exe: Expected signature for ATMEGA8 is 1E 93 07

    avrdude.exe done. Thank you.



    co dalej bo zgłupiałem

    Moderowany przez dondu:

    Dla swoich problemów zakładaj proszę swój temat. Post wydzieliłem.

  • REKLAMA
  • #3 15474549
    Konto nie istnieje
    Konto nie istnieje  
REKLAMA