Elektroda.pl
Elektroda.pl
X
Elektroda.pl
Proszę, dodaj wyjątek dla www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Toshiba C660D - Windows 7 nie uruchamia się

03 Maj 2016 11:01 570 7
  • Poziom 9  
    Witam
    Problem jest taki, Windows 7 nie uruchamia się, zatrzymuje się na ekranie uruchamiania systemu i dalej nic. Funkcja Napraw system również nie pomaga, po ekranie kopiowania plików jest obraz uruchamiania systemu Windows, później czarny ekran z kursorem, kursos dziala, ale nic poza tym i na tym stoi. Tryb awaryjny zatrzymuje się przy ladowaniu pliku vdrvroot.sys i stoi... proba instalacji z plytki instalacyjnej Windows 7 to samo, staje w tym samym momencie.

    Teraz pisze z dystrybucji Linuxa zaladowanej z plytki cd, komp dziala, dyski, lacznie ten z systemem jest zamontowany i wydaje się, że dziala.
    Co mam zrobić, jeżeli żadna z możliwosci reinstalacji systemu nie przynosi skutku?? Nie chcę przekombinować by nie uwalić partycji recovery w lapku. System Windows 7 Home oryginał. Z góry dzięki za pomoc. (sorki za dziwne polskie znaki, ale linux mi tu zaczal wariować przy niektórych kombinacjach klawiszy).
  • Poziom 42  
    Pokaż SMART dysku spod linuksa.
  • Poziom 9  
    Nie dodalem, że nei ejstem orlem w tego typu sprawach. Chętnie pokażę, ale proszę o wskazówkę gdzie znaleźć... o ile w ogóle mam coś takiego, bo nie wiem nawet co to za linux i na ile okrojony. Także proszę o wskazówkę, a zaraz wkleję. Dzięki

    PS. program GSmartControl ma jakieś problemy ze zrobieniem testu, mam z niego taki wynik, czy o to chodzi??

    smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
    Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Momentus 5400.7
    Device Model: ST9320310AS
    Serial Number: 5WV0G1C1
    LU WWN Device Id: 5 000c50 02ec17247
    Firmware Version: 0001TSM1
    User Capacity: 320,072,933,376 bytes [320 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5799 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS T13/1699-D revision 4
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Tue May 3 09:14:57 2016 UTC
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x73) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    No Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 86) minutes.
    Conveyance self-test routine
    recommended polling time: ( 3) minutes.
    SCT capabilities: (0x103f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 087 087 006 Pre-fail Always - 23772142
    3 Spin_Up_Time 0x0003 099 099 085 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2202
    5 Reallocated_Sector_Ct 0x0033 085 085 036 Pre-fail Always - 311
    7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 98888850905
    9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4011
    10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2199
    184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
    187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 587
    188 Command_Timeout 0x0032 100 056 000 Old_age Always - 5701719
    189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
    190 Airflow_Temperature_Cel 0x0022 066 053 045 Old_age Always - 34 (Min/Max 26/36)
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 439
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 36
    193 Load_Cycle_Count 0x0032 075 075 000 Old_age Always - 51563
    194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (0 18 0 0 0)
    195 Hardware_ECC_Recovered 0x001a 046 042 000 Old_age Always - 23772142
    197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 36
    198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 36
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 81273666145997
    241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1859951772
    242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1555801422
    254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

    SMART Error Log Version: 1
    ATA Error Count: 593 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 593 occurred at disk power-on lifetime: 4009 hours (167 days + 1 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 00 71 99 6c 00 Error: UNC at LBA = 0x006c9971 = 7117169

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    60 00 08 70 99 6c 40 00 00:58:13.419 READ FPDMA QUEUED
    60 00 08 30 84 fa 46 00 00:57:56.848 READ FPDMA QUEUED
    60 00 08 08 e9 fa 46 00 00:57:52.829 READ FPDMA QUEUED
    60 00 08 30 ba fa 46 00 00:57:51.394 READ FPDMA QUEUED
    60 00 08 f8 b9 fa 46 00 00:57:51.386 READ FPDMA QUEUED

    Error 592 occurred at disk power-on lifetime: 4009 hours (167 days + 1 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 00 71 99 6c 00 Error: UNC at LBA = 0x006c9971 = 7117169

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    60 00 08 70 99 6c 40 00 00:56:12.565 READ FPDMA QUEUED
    60 00 08 a0 23 f9 46 00 00:56:06.042 READ FPDMA QUEUED
    60 00 08 70 bf 6e 40 00 00:56:06.025 READ FPDMA QUEUED
    60 00 08 70 3a f6 46 00 00:56:06.004 READ FPDMA QUEUED
    60 00 08 10 31 6d 40 00 00:56:05.982 READ FPDMA QUEUED

    Error 591 occurred at disk power-on lifetime: 4009 hours (167 days + 1 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 00 71 99 6c 00 Error: UNC at LBA = 0x006c9971 = 7117169

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    60 00 08 70 99 6c 40 00 00:55:53.701 READ FPDMA QUEUED
    60 00 08 90 ca 06 42 00 00:55:36.907 READ FPDMA QUEUED
    60 00 08 88 ca 06 42 00 00:55:36.892 READ FPDMA QUEUED
    60 00 08 20 0a 85 42 00 00:55:36.877 READ FPDMA QUEUED
    60 00 08 d8 8d 76 42 00 00:55:36.871 READ FPDMA QUEUED

    Error 590 occurred at disk power-on lifetime: 4009 hours (167 days + 1 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 00 4d 8c 6c 00 Error: UNC at LBA = 0x006c8c4d = 7113805

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    60 00 08 48 8c 6c 40 00 00:54:01.571 READ FPDMA QUEUED
    27 00 00 00 00 00 e0 00 00:54:01.536 READ NATIVE MAX ADDRESS EXT
    ec 00 00 00 00 00 a0 00 00:54:01.534 IDENTIFY DEVICE
    ef 03 46 00 00 00 a0 00 00:54:01.450 SET FEATURES [Set transfer mode]
    27 00 00 00 00 00 e0 00 00:54:01.422 READ NATIVE MAX ADDRESS EXT

    Error 589 occurred at disk power-on lifetime: 4009 hours (167 days + 1 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH
    -- -- -- -- -- -- --
    40 51 00 4d 8c 6c 00 Error: UNC at LBA = 0x006c8c4d = 7113805

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
    -- -- -- -- -- -- -- -- ---------------- --------------------
    60 00 08 48 8c 6c 40 00 00:53:55.108 READ FPDMA QUEUED
    60 00 08 b0 32 04 40 00 00:53:55.014 READ FPDMA QUEUED
    60 00 08 a8 32 04 40 00 00:53:55.001 READ FPDMA QUEUED
    60 00 08 28 0c 00 40 00 00:53:54.995 READ FPDMA QUEUED
    60 00 08 b8 04 00 40 00 00:53:54.995 READ FPDMA QUEUED

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed: read failure 90% 4011 29778897
    # 2 Short offline Completed: read failure 90% 4011 29778897
    # 3 Conveyance offline Completed: read failure 90% 4011 29778897
    # 4 Short offline Completed: read failure 90% 4010 29778897
    # 5 Short offline Completed: read failure 90% 4009 29778897

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
  • Pomocny post
    Poziom 42  
    szopenus napisał:
    czy o to chodzi??


    Tak. Nie jest dobrze.

    szopenus napisał:
    5 Reallocated_Sector_Ct 0x0033 085 085 036 Pre-fail Always - 311


    Wartość jest za wysoka i świadczy o uszkodzeniu dysku.
  • Poziom 9  
    Rozumiem, że uszkodzenie fizyczne i nie ma opcji naprawy żadnym programem?
  • Poziom 9  
    Jeżeli jest tak jak piszesz, a zapewne tak jest, nie będę się już z tym dyskiem babral. Trzeba go wymienić. Czy na to uszkodzenie moglo mieć wplyw coś poza dyskiem? Czy może byc to efektem problemów z zasilaniem etc.? Nie chciałbym, by sytuacja powtórzyła się z nowym dyskiem. Pzdr.
  • Pomocny post
    Poziom 42  
    Na sektory realokowane (nienaprawialne) wpływ mógł mieć przede wszystkim:
    szopenus napisał:
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 439


    tj. niedopuszczalne wstrząsy / upadki.

    szopenus napisał:
    Czy może byc to efektem problemów z zasilaniem etc.?


    szopenus napisał:
    188 Command_Timeout 0x0032 100 056 000 Old_age Always - 5701719


    Także.

    Poczytaj, a zrozumiesz wszystko o czym napisałem http://dyski.cdrinfo.pl/artykuly/smart/strona3.php