Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek dla www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

mp3,sony, nwz-b172 - odzyskanie danych

07 Lis 2016 22:27 3429 15
  • Poziom 9  
    Mam problem z odczytaniem danych, które były wcześniej na odtwarzaczu MP3.
    Próbowałem programem Photorec ale urządzenie nie jest widoczne w oknie eksploratora programu.

    W jakiś starych wątkach na elektrodzie odnalazłem sugestie, żeby użyć programu Getdataback ale jest płatny :) oraz nie mam pewności, czy wykryje to urządzenie.

    Ktoś się orientuje w tej materii? Jak zrobić, żeby pamięć urządzenia była widoczna jako dysk?

    Na szczęście, urządzenie jest w tej chwili sprawne.

    Może to nie jest typowy dysk HDD ale wydaje mi się, że to odpowiedni dział. Moderatorów proszę o nie spinanie się z ortografią. W razie co, proszę przerzucić wątek do odpowiedniego działu. Dziękuję i dobranoc.
  • Specjalista - HDD i odzyskiwanie danych
    Jak widzi DMDE ten odtwarzacz w urządzeniach fizycznych?
  • Specjalista - HDD i odzyskiwanie danych
    cynamonik napisał:
    DMDE w wersji "free" rowniez nie widzi :(

    Danych czy urządzenia? Jak jest wykrywany w komputerze, jak jest widziany w zarządzaniu dyskami? Wg mnie powinien być wykrywany chyba jak zwykły pendrive.
  • Poziom 9  
    wspomniane powyżej programy nie widzą go jako ani jako urządzenie ani jako dysk.

    system windows wykrywa go jako urządzenie o nazwie "WALKMAN NWZ-B172"

    w zarządzaniu dyskami również jest nie widoczny.

    nie otrzymuje też charakterystycznej litery w nawiasie, jak np każdy pendrive i nie można "softwarowo" usunąć urządzenia z systemu.
  • Pomocny post
    Spec od pamięci masowych
    cynamonik napisał:
    wspomniane powyżej programy nie widzą go jako ani jako urządzenie ani jako dysk.

    To proszę podłączyć teraz to urządzenie i dać log po uruchomieniu programu z załącznika (ListUsbDrives).

    cynamonik napisał:
    Na szczęście, urządzenie jest w tej chwili sprawne.

    :?:
    Załączniki:
  • Poziom 9  
    niestety nadal urządzenia nie widać. poniżej screen z okna polecanego programu..

    mp3,sony, nwz-b172 - odzyskanie danych

    dla sprawdzenia podłączyłem do komputera innego pendriv-a i aplikacja wyrzuciła jakies logi. zatem tez walkman jest niewidoczny całkowicie ?
  • Spec od pamięci masowych
    cynamonik napisał:
    niestety nadal urządzenia nie widać. poniżej screen z okna polecanego programu..

    Coś niedowierzam temu screenowi. :|

    USB Device Tree Viewer -> zrzut z tego programu poproszę.
    https://www.elektroda.pl/rtvforum/viewtopic.php?p=16170981#16170981
  • Poziom 9  
    poniżej raport i screen z programu USB Device Tree Viewer.. tu już jest widoczny :)
    niezłe narzędzie mi podesłałeś - dzięki !!! już widzę, że przyda się do innego problemu, ale dam oddzielny wątek ze szczegółami w weekend.
    mp3,sony, nwz-b172 - odzyskanie danych

    Spoiler:


    ========================== My Computer ==========================
    Operating System : Windows 7 Professional: NT6.1 Build 7601 SP1 type=1 suite=100 Win32
    Computer Name : DV8333-KOMPUTER
    Admin Previleges : yes

    UsbTreeView Version : 3.0.8.0 (Win32)

    USB Host Controllers : 5
    USB Root Hubs : 5
    USB Standard Hubs : 0
    USB Peripheral Devices : 2

    ===================== USB Host Controller =======================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Uniwersalny kontroler hosta USB Intel(R) 82801G (ICH7 Family) - 27C8
    Device Path : \\.\pci#ven_8086&dev_27c8&subsys_30a5103c&rev_01#3&42ffd25&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    Device ID : PCI\VEN_8086&DEV_27C8&SUBSYS_30A5103C&REV_01\3&42FFD25&0&E8
    Vendor : Intel
    Hardware IDs : PCI\VEN_8086&DEV_27C8&SUBSYS_30A5103C&REV_01 PCI\VEN_8086&DEV_27C8&SUBSYS_30A5103C PCI\VEN_8086&DEV_27C8&CC_0C0300 PCI\VEN_8086&DEV_27C8&CC_0C03
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0000 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbuhci.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PCIBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {3abf6f2d-71c4-462a-8a92-1e6861e6af27} (GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
    Service : usbuhci
    Enumerator : PCI
    Location Info : Magistrala PCI 0, urządzenie 29, funkcja 0
    Manufacturer Info : Intel
    Capabilities : 0x00 (-)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 1900544 (0x1D0000)
    Power State : D0 (supported: D0, D3)
    Child Device 1 : Główny koncentrator USB
    Device ID : USB\ROOT_HUB\4&9569D12&0
    Class : USB

    --------------- USB Hostcontroller Info0 --------------
    PciVendorId : 0x8086 (Intel)
    PciDeviceId : 0x27C8
    PciRevision : 0x01
    NumberOfRootPorts : 0x02 (2 Ports)
    ControllerFlavor : 0xF9 (249 = UHCI_Intel)
    HcFeatureFlags : 0x02
    Port Power Switching : no
    Selective Suspend : yes
    Legacy BIOS : no

    Roothub Symbolic Link : USB#ROOT_HUB#4&9569d12&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}

    ----------- USB Hostcontroller BusStatistics ----------
    DeviceCount : 0x02 (2)
    CurrentSystemTime : 0x01D272B2300009B9 (2017-01-20 01:14:38)
    CurrentUsbFrame : 0x375AFA8 (58044328)
    BulkBytes : 0x00 (0)
    IsoBytes : 0x00 (0)
    InterruptBytes : 0x45AD6B (4566379)
    ControlDataBytes : 0x488 (1160)
    PciInterruptCount : 0xEB165 (962917)
    HardResetCount : 0x00 (0)
    WorkerSignalCount : 0x00 (0)
    CommonBufferBytes : 0xE000 (57344)
    WorkerIdleTimeMs : 0x00 (0)
    RootHubEnabled : 0x01 (yes)
    RootHubDevicePowerState : 0x00 (D0)
    Unused : 0x00 (0)
    NameIndex : 0x00 (0)


    ------ USB Hostcontroller Driver Version Params -------
    DriverTrackingCode : 0x03
    USBDI_Version : 0x600
    USBUSER_Version : 0x04
    CheckedPortDriver : 0x00
    CheckedMiniportDriver : 0x00
    USB_Version : 0x00

    ---------- USB Hostcontroller Bandwidth Info ----------
    DeviceCount : 0x00000002 (2)
    TotalBusBandwidth : 0x00002EE0 (12000 bits/ms = 1.5 MB/s)
    Total32secBandwidth : 0x0005DC00 (384000 bits/32ms = 1.5 MB/s)
    AllocedBulkAndControl : 0x00009600 (38400 bits/32ms = 150 KB/s = 10%)
    AllocedIso : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_1ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_2ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_4ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_8ms : 0x00001500 (5376 bits/32ms = 21 KB/s = 1%)
    AllocedInterrupt_16ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_32ms : 0x00000000 (0 bits/32ms)


    -------- USB Hostcontroller Power States Info ---------
    SystemState : S0 S1 S2 S3 S4 S5
    HcDevicePowerState : D0 -- -- D3 D3 --
    HcDeviceWake : -- -- -- -- -- --
    HcSystemWake : -- -- -- -- -- --
    RhDevicePowerState : D0 D3 D3 D3 D3 --
    RhDeviceWake : D2 D2 D2 D2 D2 D2
    RhSystemWake : S0 S0 S0 S0 S0 S0
    LastSystemSleepState : -- -- -- -- -- --
    CanWakeup : no no no no no no
    IsPowered : no no no no no no


    ========================= USB Root Hub =========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Główny koncentrator USB
    Device Path : \\.\usb#root_hub#4&9569d12&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Device ID : USB\ROOT_HUB\4&9569D12&0
    Hardware IDs : USB\ROOT_HUB&VID8086&PID27C8&REV0001 USB\ROOT_HUB&VID8086&PID27C8 USB\ROOT_HUB
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0007 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbhub.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PNPBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {f18a0e88-c30c-11d0-8815-00a0c906bed8} (GUID_DEVINTERFACE_USB_HUB)
    Service : usbhub
    Enumerator : USB
    Location Info : -
    Manufacturer Info : (Standardowy kontroler hosta USB)
    Capabilities : 0x80 (SurpriseRemovalOK)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 0
    Power State : D0 (supported: D0, D2, D3, wake from D0, wake from D2)
    Child Device 1 : Urządzenie wejściowe USB
    Device ID : USB\VID_09DA&PID_000A\5&251A8D7D&0&1
    Class : HIDClass

    ------------------- USB Hub Descriptor -----------------
    bDescriptorLength : 0x09 (9 bytes)
    bDescriptorType : 0x29 (Hub Descriptor)
    bNumberOfPorts : 0x02 (2 Ports)
    wHubCharacteristics : 0x001B
    Power switching : None
    Compound device : No
    Over-current protection : None (Bus Power Only)
    TT Think Time : At most 8 FS bit times
    Port Indicators : Not supported
    bPowerOnToPowerGood : 0x01 (2 ms)
    bHubControlCurrent : 0x00 (0 mA)
    DeviceRemovable : 0x00
    Bit 0 : 0 (reserved, any value)
    Bit 1 : 0 (Device at Port 1 is removable)
    Bit 2 : 0 (Device at Port 2 is removable)
    Bit 3 : 0 (unused, must be 0)
    Bit 4 : 0 (unused, must be 0)
    Bit 5 : 0 (unused, must be 0)
    Bit 6 : 0 (unused, must be 0)
    Bit 7 : 0 (unused, must be 0)
    PowerControlMask : 0xFF
    HubIsBusPowered : 0x00 (Self Powered)

    ----------------- USB Hub Capabilities ----------------
    HighSpeedCapable : No
    HighSpeed : No
    MultiTtCapable : No
    HubIsMultiTt : No
    ArmedWakeOnConnect : No
    IsBusPowered : No
    IsRoot : Yes


    =========================== USB Port1 ===========================

    Connection Status : 0x01 (Device is connected)
    Port Chain : 1-1

    ======================== USB Device ========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Urządzenie wejściowe USB
    Device Path : \\?\usb#vid_09da&pid_000a#5&251a8d7d&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    Device ID : USB\VID_09DA&PID_000A\5&251A8D7D&0&1
    Hardware IDs : USB\VID_09DA&PID_000A&REV_0001 USB\VID_09DA&PID_000A
    Driver KeyName : {745a17a0-74d3-11d0-b6fe-00a0c90f57da}\0001 (GUID_DEVCLASS_HIDCLASS)
    Driver : C:\Windows\system32\DRIVERS\hidusb.sys (Version: 6.1.7601.23403 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\input.inf
    Legacy BusType : PNPBus
    Class : HIDClass
    Class GUID : {745a17a0-74d3-11d0-b6fe-00a0c90f57da} (GUID_DEVCLASS_HIDCLASS)
    Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
    Service : HidUsb
    Enumerator : USB
    Location Info : Port_#0001.Hub_#0001
    Location IDs : PCIROOT(0)#PCI(1D00)#USBROOT(0)#USB(1)
    Container ID : {bbdd85f0-d5b6-11e6-8dad-0016418632b6}
    Manufacturer Info : (Standardowe urządzenia systemowe)
    Capabilities : 0x84 (Removable, SurpriseRemovalOK)
    Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Power State : D0 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
    Child Device 1 : Mysz zgodna z HID
    Device ID : HID\VID_09DA&PID_000A\6&2DD9A3FB&0&0000
    Class : Mouse

    ---------------- Connection Information ---------------
    Connection Index : 0x01 (1)
    Connection Status : 0x01 (DeviceConnected)
    Current Config Value : 0x01
    Device Address : 0x01 (1)
    Is Hub : 0x00 (no)
    Number Of Open Pipes : 0x01 (1)
    Device Bus Speed : 0x00 (Low-Speed)
    Pipe0ScheduleOffset : 0x00 (0)

    ------------------ Device Descriptor ------------------
    bLength : 0x12 (18 bytes)
    bDescriptorType : 0x01 (Device Descriptor)
    bcdUSB : 0x110 (USB Version 1.10)
    bDeviceClass : 0x00 (defined by the interface descriptors)
    bDeviceSubClass : 0x00
    bDeviceProtocol : 0x00
    bMaxPacketSize0 : 0x08 (8 bytes)
    idVendor : 0x09DA (A-FOUR TECH CO., LTD.)
    idProduct : 0x000A
    bcdDevice : 0x0001
    iManufacturer : 0x01 (String Descriptor 1)
    Language 0x0409 : "A4Tech"
    iProduct : 0x02 (String Descriptor 2)
    Language 0x0409 : "PS/2+USB Mouse"
    iSerialNumber : 0x00 (No String Descriptor)
    bNumConfigurations : 0x01

    ------------------ String Descriptors -----------------
    ------ String Descriptor 0 ------
    bLength : 0x04 (4 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language ID[0] : 0x0409 (English - United States)
    ------ String Descriptor 1 ------
    bLength : 0x0E (14 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "A4Tech"
    ------ String Descriptor 2 ------
    bLength : 0x1E (30 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "PS/2+USB Mouse"
    ------ String Descriptor 3 ------
    bLength : 0x28 (40 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "HID-Compliant Mouse"

    ---------------- Configuration Descriptor -----------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x02 (Configuration Descriptor)
    wTotalLength : 0x0022 (34 bytes)
    bNumInterfaces : 0x01
    bConfigurationValue : 0x01
    iConfiguration : 0x03 (String Descriptor 3)
    Language 0x0409 : "HID-Compliant Mouse"
    bmAttributes : 0xA0
    D7: Reserved, set 1 : 0x01
    D6: Self Powered : 0x00 (no)
    D5: Remote Wakeup : 0x01 (yes)
    D4..0: Reserved, set 0 : 0x00
    MaxPower : 0x32 (100 mA)

    ---------------- Interface Descriptor -----------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x04 (Interface Descriptor)
    bInterfaceNumber : 0x00
    bAlternateSetting : 0x00
    bNumEndpoints : 0x01 (1 Endpoint)
    bInterfaceClass : 0x03 (HID - Human Interface Device)
    bInterfaceSubClass : 0x01 (Boot Interface)
    bInterfaceProtocol : 0x02 (Mouse)
    iInterface : 0x00 (No String Descriptor)

    ------------------- HID Descriptor --------------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x21 (HID Descriptor)
    bcdHID : 0x0110 (HID Version 1.10)
    bCountryCode : 0x00 (00 = not localized)
    bNumDescriptors : 0x01
    Descriptor 1:
    bDescriptorType : 0x22 (Class=Report)
    wDescriptorLength : 0x0030 (48 bytes)
    Error reading descriptor : ERROR_INVALID_PARAMETER

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
    bmAttributes : 0x03 (TransferType=Interrupt)
    wMaxPacketSize : 0x0005
    bInterval : 0x0A (10 ms)

    =========================== USB Port2 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 1-2


    ===================== USB Host Controller =======================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Uniwersalny kontroler hosta USB Intel(R) 82801G (ICH7 Family) - 27C9
    Device Path : \\.\pci#ven_8086&dev_27c9&subsys_30a5103c&rev_01#3&42ffd25&0&e9#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    Device ID : PCI\VEN_8086&DEV_27C9&SUBSYS_30A5103C&REV_01\3&42FFD25&0&E9
    Vendor : Intel
    Hardware IDs : PCI\VEN_8086&DEV_27C9&SUBSYS_30A5103C&REV_01 PCI\VEN_8086&DEV_27C9&SUBSYS_30A5103C PCI\VEN_8086&DEV_27C9&CC_0C0300 PCI\VEN_8086&DEV_27C9&CC_0C03
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0001 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbuhci.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PCIBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {3abf6f2d-71c4-462a-8a92-1e6861e6af27} (GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
    Service : usbuhci
    Enumerator : PCI
    Location Info : Magistrala PCI 0, urządzenie 29, funkcja 1
    Manufacturer Info : Intel
    Capabilities : 0x00 (-)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 1900545 (0x1D0001)
    Power State : D0 (supported: D0, D3)
    Child Device 1 : Główny koncentrator USB
    Device ID : USB\ROOT_HUB\4&51A5E92&0
    Class : USB

    --------------- USB Hostcontroller Info0 --------------
    PciVendorId : 0x8086 (Intel)
    PciDeviceId : 0x27C9
    PciRevision : 0x01
    NumberOfRootPorts : 0x02 (2 Ports)
    ControllerFlavor : 0xF9 (249 = UHCI_Intel)
    HcFeatureFlags : 0x02
    Port Power Switching : no
    Selective Suspend : yes
    Legacy BIOS : no

    Roothub Symbolic Link : USB#ROOT_HUB#4&51a5e92&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}

    ----------- USB Hostcontroller BusStatistics ----------
    DeviceCount : 0x01 (1)
    CurrentSystemTime : 0x01D272B230027AC2 (2017-01-20 01:14:38)
    CurrentUsbFrame : 0xFFFFFFFF (-1)
    BulkBytes : 0x00 (0)
    IsoBytes : 0x00 (0)
    InterruptBytes : 0x00 (0)
    ControlDataBytes : 0xA8 (168)
    PciInterruptCount : 0x28 (40)
    HardResetCount : 0x00 (0)
    WorkerSignalCount : 0x00 (0)
    CommonBufferBytes : 0x4000 (16384)
    WorkerIdleTimeMs : 0x00 (0)
    RootHubEnabled : 0x01 (yes)
    RootHubDevicePowerState : 0x02 (D2)
    Unused : 0x00 (0)
    NameIndex : 0x00 (0)


    ------ USB Hostcontroller Driver Version Params -------
    DriverTrackingCode : 0x03
    USBDI_Version : 0x600
    USBUSER_Version : 0x04
    CheckedPortDriver : 0x00
    CheckedMiniportDriver : 0x00
    USB_Version : 0x00

    ---------- USB Hostcontroller Bandwidth Info ----------
    DeviceCount : 0x00000001 (1)
    TotalBusBandwidth : 0x00002EE0 (12000 bits/ms = 1.5 MB/s)
    Total32secBandwidth : 0x0005DC00 (384000 bits/32ms = 1.5 MB/s)
    AllocedBulkAndControl : 0x00009600 (38400 bits/32ms = 150 KB/s = 10%)
    AllocedIso : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_1ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_2ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_4ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_8ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_16ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_32ms : 0x00000000 (0 bits/32ms)


    -------- USB Hostcontroller Power States Info ---------
    SystemState : S0 S1 S2 S3 S4 S5
    HcDevicePowerState : D0 -- -- D3 D3 --
    HcDeviceWake : -- -- -- -- -- --
    HcSystemWake : -- -- -- -- -- --
    RhDevicePowerState : D0 D3 D3 D3 D3 --
    RhDeviceWake : D2 D2 D2 D2 D2 D2
    RhSystemWake : S0 S0 S0 S0 S0 S0
    LastSystemSleepState : -- -- -- -- -- --
    CanWakeup : no no no no no no
    IsPowered : no no no no no no


    ========================= USB Root Hub =========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Główny koncentrator USB
    Device Path : \\.\usb#root_hub#4&51a5e92&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Device ID : USB\ROOT_HUB\4&51A5E92&0
    Hardware IDs : USB\ROOT_HUB&VID8086&PID27C9&REV0001 USB\ROOT_HUB&VID8086&PID27C9 USB\ROOT_HUB
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0006 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbhub.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PNPBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {f18a0e88-c30c-11d0-8815-00a0c906bed8} (GUID_DEVINTERFACE_USB_HUB)
    Service : usbhub
    Enumerator : USB
    Location Info : -
    Manufacturer Info : (Standardowy kontroler hosta USB)
    Capabilities : 0x80 (SurpriseRemovalOK)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 0
    Power State : D0 (supported: D0, D2, D3, wake from D0, wake from D2)

    ------------------- USB Hub Descriptor -----------------
    bDescriptorLength : 0x09 (9 bytes)
    bDescriptorType : 0x29 (Hub Descriptor)
    bNumberOfPorts : 0x02 (2 Ports)
    wHubCharacteristics : 0x001B
    Power switching : None
    Compound device : No
    Over-current protection : None (Bus Power Only)
    TT Think Time : At most 8 FS bit times
    Port Indicators : Not supported
    bPowerOnToPowerGood : 0x01 (2 ms)
    bHubControlCurrent : 0x00 (0 mA)
    DeviceRemovable : 0x00
    Bit 0 : 0 (reserved, any value)
    Bit 1 : 0 (Device at Port 1 is removable)
    Bit 2 : 0 (Device at Port 2 is removable)
    Bit 3 : 0 (unused, must be 0)
    Bit 4 : 0 (unused, must be 0)
    Bit 5 : 0 (unused, must be 0)
    Bit 6 : 0 (unused, must be 0)
    Bit 7 : 0 (unused, must be 0)
    PowerControlMask : 0xFF
    HubIsBusPowered : 0x00 (Self Powered)

    ----------------- USB Hub Capabilities ----------------
    HighSpeedCapable : No
    HighSpeed : No
    MultiTtCapable : No
    HubIsMultiTt : No
    ArmedWakeOnConnect : No
    IsBusPowered : No
    IsRoot : Yes


    =========================== USB Port1 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 2-1


    =========================== USB Port2 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 2-2


    ===================== USB Host Controller =======================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Uniwersalny kontroler hosta USB Intel(R) 82801G (ICH7 Family) - 27CA
    Device Path : \\.\pci#ven_8086&dev_27ca&subsys_30a5103c&rev_01#3&42ffd25&0&ea#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    Device ID : PCI\VEN_8086&DEV_27CA&SUBSYS_30A5103C&REV_01\3&42FFD25&0&EA
    Vendor : Intel
    Hardware IDs : PCI\VEN_8086&DEV_27CA&SUBSYS_30A5103C&REV_01 PCI\VEN_8086&DEV_27CA&SUBSYS_30A5103C PCI\VEN_8086&DEV_27CA&CC_0C0300 PCI\VEN_8086&DEV_27CA&CC_0C03
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0002 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbuhci.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PCIBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {3abf6f2d-71c4-462a-8a92-1e6861e6af27} (GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
    Service : usbuhci
    Enumerator : PCI
    Location Info : Magistrala PCI 0, urządzenie 29, funkcja 2
    Manufacturer Info : Intel
    Capabilities : 0x00 (-)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 1900546 (0x1D0002)
    Power State : D0 (supported: D0, D3)
    Child Device 1 : Główny koncentrator USB
    Device ID : USB\ROOT_HUB\4&1AE0C5C9&0
    Class : USB

    --------------- USB Hostcontroller Info0 --------------
    PciVendorId : 0x8086 (Intel)
    PciDeviceId : 0x27CA
    PciRevision : 0x01
    NumberOfRootPorts : 0x02 (2 Ports)
    ControllerFlavor : 0xF9 (249 = UHCI_Intel)
    HcFeatureFlags : 0x02
    Port Power Switching : no
    Selective Suspend : yes
    Legacy BIOS : no

    Roothub Symbolic Link : USB#ROOT_HUB#4&1ae0c5c9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}

    ----------- USB Hostcontroller BusStatistics ----------
    DeviceCount : 0x01 (1)
    CurrentSystemTime : 0x01D272B2300B5483 (2017-01-20 01:14:38)
    CurrentUsbFrame : 0xFFFFFFFF (-1)
    BulkBytes : 0x00 (0)
    IsoBytes : 0x00 (0)
    InterruptBytes : 0x00 (0)
    ControlDataBytes : 0xA8 (168)
    PciInterruptCount : 0x28 (40)
    HardResetCount : 0x00 (0)
    WorkerSignalCount : 0x00 (0)
    CommonBufferBytes : 0x4000 (16384)
    WorkerIdleTimeMs : 0x00 (0)
    RootHubEnabled : 0x01 (yes)
    RootHubDevicePowerState : 0x02 (D2)
    Unused : 0x00 (0)
    NameIndex : 0x00 (0)


    ------ USB Hostcontroller Driver Version Params -------
    DriverTrackingCode : 0x03
    USBDI_Version : 0x600
    USBUSER_Version : 0x04
    CheckedPortDriver : 0x00
    CheckedMiniportDriver : 0x00
    USB_Version : 0x00

    ---------- USB Hostcontroller Bandwidth Info ----------
    DeviceCount : 0x00000001 (1)
    TotalBusBandwidth : 0x00002EE0 (12000 bits/ms = 1.5 MB/s)
    Total32secBandwidth : 0x0005DC00 (384000 bits/32ms = 1.5 MB/s)
    AllocedBulkAndControl : 0x00009600 (38400 bits/32ms = 150 KB/s = 10%)
    AllocedIso : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_1ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_2ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_4ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_8ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_16ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_32ms : 0x00000000 (0 bits/32ms)


    -------- USB Hostcontroller Power States Info ---------
    SystemState : S0 S1 S2 S3 S4 S5
    HcDevicePowerState : D0 -- -- D3 D3 --
    HcDeviceWake : -- -- -- -- -- --
    HcSystemWake : -- -- -- -- -- --
    RhDevicePowerState : D0 D3 D3 D3 D3 --
    RhDeviceWake : D2 D2 D2 D2 D2 D2
    RhSystemWake : S0 S0 S0 S0 S0 S0
    LastSystemSleepState : -- -- -- -- -- --
    CanWakeup : no no no no no no
    IsPowered : no no no no no no


    ========================= USB Root Hub =========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Główny koncentrator USB
    Device Path : \\.\usb#root_hub#4&1ae0c5c9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Device ID : USB\ROOT_HUB\4&1AE0C5C9&0
    Hardware IDs : USB\ROOT_HUB&VID8086&PID27CA&REV0001 USB\ROOT_HUB&VID8086&PID27CA USB\ROOT_HUB
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0009 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbhub.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PNPBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {f18a0e88-c30c-11d0-8815-00a0c906bed8} (GUID_DEVINTERFACE_USB_HUB)
    Service : usbhub
    Enumerator : USB
    Location Info : -
    Manufacturer Info : (Standardowy kontroler hosta USB)
    Capabilities : 0x80 (SurpriseRemovalOK)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 0
    Power State : D0 (supported: D0, D2, D3, wake from D0, wake from D2)

    ------------------- USB Hub Descriptor -----------------
    bDescriptorLength : 0x09 (9 bytes)
    bDescriptorType : 0x29 (Hub Descriptor)
    bNumberOfPorts : 0x02 (2 Ports)
    wHubCharacteristics : 0x001B
    Power switching : None
    Compound device : No
    Over-current protection : None (Bus Power Only)
    TT Think Time : At most 8 FS bit times
    Port Indicators : Not supported
    bPowerOnToPowerGood : 0x01 (2 ms)
    bHubControlCurrent : 0x00 (0 mA)
    DeviceRemovable : 0x00
    Bit 0 : 0 (reserved, any value)
    Bit 1 : 0 (Device at Port 1 is removable)
    Bit 2 : 0 (Device at Port 2 is removable)
    Bit 3 : 0 (unused, must be 0)
    Bit 4 : 0 (unused, must be 0)
    Bit 5 : 0 (unused, must be 0)
    Bit 6 : 0 (unused, must be 0)
    Bit 7 : 0 (unused, must be 0)
    PowerControlMask : 0xFF
    HubIsBusPowered : 0x00 (Self Powered)

    ----------------- USB Hub Capabilities ----------------
    HighSpeedCapable : No
    HighSpeed : No
    MultiTtCapable : No
    HubIsMultiTt : No
    ArmedWakeOnConnect : No
    IsBusPowered : No
    IsRoot : Yes


    =========================== USB Port1 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 3-1


    =========================== USB Port2 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 3-2


    ===================== USB Host Controller =======================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Uniwersalny kontroler hosta USB Intel(R) 82801G (ICH7 Family) - 27CB
    Device Path : \\.\pci#ven_8086&dev_27cb&subsys_30a5103c&rev_01#3&42ffd25&0&eb#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    Device ID : PCI\VEN_8086&DEV_27CB&SUBSYS_30A5103C&REV_01\3&42FFD25&0&EB
    Vendor : Intel
    Hardware IDs : PCI\VEN_8086&DEV_27CB&SUBSYS_30A5103C&REV_01 PCI\VEN_8086&DEV_27CB&SUBSYS_30A5103C PCI\VEN_8086&DEV_27CB&CC_0C0300 PCI\VEN_8086&DEV_27CB&CC_0C03
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0003 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbuhci.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PCIBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {3abf6f2d-71c4-462a-8a92-1e6861e6af27} (GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
    Service : usbuhci
    Enumerator : PCI
    Location Info : Magistrala PCI 0, urządzenie 29, funkcja 3
    Manufacturer Info : Intel
    Capabilities : 0x00 (-)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 1900547 (0x1D0003)
    Power State : D0 (supported: D0, D3)
    Child Device 1 : Główny koncentrator USB
    Device ID : USB\ROOT_HUB\4&2F2AFFE2&0
    Class : USB

    --------------- USB Hostcontroller Info0 --------------
    PciVendorId : 0x8086 (Intel)
    PciDeviceId : 0x27CB
    PciRevision : 0x01
    NumberOfRootPorts : 0x02 (2 Ports)
    ControllerFlavor : 0xF9 (249 = UHCI_Intel)
    HcFeatureFlags : 0x02
    Port Power Switching : no
    Selective Suspend : yes
    Legacy BIOS : no

    Roothub Symbolic Link : USB#ROOT_HUB#4&2f2affe2&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}

    ----------- USB Hostcontroller BusStatistics ----------
    DeviceCount : 0x01 (1)
    CurrentSystemTime : 0x01D272B230145555 (2017-01-20 01:14:38)
    CurrentUsbFrame : 0xFFFFFFFF (-1)
    BulkBytes : 0x00 (0)
    IsoBytes : 0x00 (0)
    InterruptBytes : 0x00 (0)
    ControlDataBytes : 0xA8 (168)
    PciInterruptCount : 0x27 (39)
    HardResetCount : 0x00 (0)
    WorkerSignalCount : 0x00 (0)
    CommonBufferBytes : 0x4000 (16384)
    WorkerIdleTimeMs : 0x00 (0)
    RootHubEnabled : 0x01 (yes)
    RootHubDevicePowerState : 0x02 (D2)
    Unused : 0x00 (0)
    NameIndex : 0x00 (0)


    ------ USB Hostcontroller Driver Version Params -------
    DriverTrackingCode : 0x03
    USBDI_Version : 0x600
    USBUSER_Version : 0x04
    CheckedPortDriver : 0x00
    CheckedMiniportDriver : 0x00
    USB_Version : 0x00

    ---------- USB Hostcontroller Bandwidth Info ----------
    DeviceCount : 0x00000001 (1)
    TotalBusBandwidth : 0x00002EE0 (12000 bits/ms = 1.5 MB/s)
    Total32secBandwidth : 0x0005DC00 (384000 bits/32ms = 1.5 MB/s)
    AllocedBulkAndControl : 0x00009600 (38400 bits/32ms = 150 KB/s = 10%)
    AllocedIso : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_1ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_2ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_4ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_8ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_16ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_32ms : 0x00000000 (0 bits/32ms)


    -------- USB Hostcontroller Power States Info ---------
    SystemState : S0 S1 S2 S3 S4 S5
    HcDevicePowerState : D0 -- -- D3 D3 --
    HcDeviceWake : -- -- -- -- -- --
    HcSystemWake : -- -- -- -- -- --
    RhDevicePowerState : D0 D3 D3 D3 D3 --
    RhDeviceWake : D2 D2 D2 D2 D2 D2
    RhSystemWake : S0 S0 S0 S0 S0 S0
    LastSystemSleepState : -- -- -- -- -- --
    CanWakeup : no no no no no no
    IsPowered : no no no no no no


    ========================= USB Root Hub =========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Główny koncentrator USB
    Device Path : \\.\usb#root_hub#4&2f2affe2&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Device ID : USB\ROOT_HUB\4&2F2AFFE2&0
    Hardware IDs : USB\ROOT_HUB&VID8086&PID27CB&REV0001 USB\ROOT_HUB&VID8086&PID27CB USB\ROOT_HUB
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0005 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbhub.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PNPBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {f18a0e88-c30c-11d0-8815-00a0c906bed8} (GUID_DEVINTERFACE_USB_HUB)
    Service : usbhub
    Enumerator : USB
    Location Info : -
    Manufacturer Info : (Standardowy kontroler hosta USB)
    Capabilities : 0x80 (SurpriseRemovalOK)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 0
    Power State : D0 (supported: D0, D2, D3, wake from D0, wake from D2)

    ------------------- USB Hub Descriptor -----------------
    bDescriptorLength : 0x09 (9 bytes)
    bDescriptorType : 0x29 (Hub Descriptor)
    bNumberOfPorts : 0x02 (2 Ports)
    wHubCharacteristics : 0x001B
    Power switching : None
    Compound device : No
    Over-current protection : None (Bus Power Only)
    TT Think Time : At most 8 FS bit times
    Port Indicators : Not supported
    bPowerOnToPowerGood : 0x01 (2 ms)
    bHubControlCurrent : 0x00 (0 mA)
    DeviceRemovable : 0x00
    Bit 0 : 0 (reserved, any value)
    Bit 1 : 0 (Device at Port 1 is removable)
    Bit 2 : 0 (Device at Port 2 is removable)
    Bit 3 : 0 (unused, must be 0)
    Bit 4 : 0 (unused, must be 0)
    Bit 5 : 0 (unused, must be 0)
    Bit 6 : 0 (unused, must be 0)
    Bit 7 : 0 (unused, must be 0)
    PowerControlMask : 0xFF
    HubIsBusPowered : 0x00 (Self Powered)

    ----------------- USB Hub Capabilities ----------------
    HighSpeedCapable : No
    HighSpeed : No
    MultiTtCapable : No
    HubIsMultiTt : No
    ArmedWakeOnConnect : No
    IsBusPowered : No
    IsRoot : Yes


    =========================== USB Port1 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 4-1


    =========================== USB Port2 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 4-2


    ===================== USB Host Controller =======================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Rozszerzony kontroler hosta USB2 Intel(R) 82801G (ICH7 Family) - 27CC
    Device Path : \\.\pci#ven_8086&dev_27cc&subsys_30a5103c&rev_01#3&42ffd25&0&ef#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    Device ID : PCI\VEN_8086&DEV_27CC&SUBSYS_30A5103C&REV_01\3&42FFD25&0&EF
    Vendor : Intel
    Hardware IDs : PCI\VEN_8086&DEV_27CC&SUBSYS_30A5103C&REV_01 PCI\VEN_8086&DEV_27CC&SUBSYS_30A5103C PCI\VEN_8086&DEV_27CC&CC_0C0320 PCI\VEN_8086&DEV_27CC&CC_0C03
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0004 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbehci.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PCIBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {3abf6f2d-71c4-462a-8a92-1e6861e6af27} (GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
    Service : usbehci
    Enumerator : PCI
    Location Info : Magistrala PCI 0, urządzenie 29, funkcja 7
    Manufacturer Info : Intel
    Capabilities : 0x00 (-)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 1900551 (0x1D0007)
    Power State : D0 (supported: D0, D3)
    Child Device 1 : Główny koncentrator USB
    Device ID : USB\ROOT_HUB20\4&13015E7D&0
    Class : USB

    DebugPort (from List) : 1

    --------------- USB Hostcontroller Info0 --------------
    PciVendorId : 0x8086 (Intel)
    PciDeviceId : 0x27CC
    PciRevision : 0x01
    NumberOfRootPorts : 0x08 (8 Ports)
    ControllerFlavor : 0x3E8 (1000 = EHCI_Generic)
    HcFeatureFlags : 0x02
    Port Power Switching : no
    Selective Suspend : yes
    Legacy BIOS : no

    Roothub Symbolic Link : USB#ROOT_HUB20#4&13015e7d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}

    ----------- USB Hostcontroller BusStatistics ----------
    DeviceCount : 0x01 (1)
    CurrentSystemTime : 0x01D272B2301D5626 (2017-01-20 01:14:38)
    CurrentUsbFrame : 0xFFFFFFFF (-1)
    BulkBytes : 0x61BE9D (6405789)
    IsoBytes : 0x00 (0)
    InterruptBytes : 0x68 (104)
    ControlDataBytes : 0x108A (4234)
    PciInterruptCount : 0x127B (4731)
    HardResetCount : 0x00 (0)
    WorkerSignalCount : 0x00 (0)
    CommonBufferBytes : 0x36000 (221184)
    WorkerIdleTimeMs : 0x00 (0)
    RootHubEnabled : 0x01 (yes)
    RootHubDevicePowerState : 0x02 (D2)
    Unused : 0x00 (0)
    NameIndex : 0x00 (0)


    ------ USB Hostcontroller Driver Version Params -------
    DriverTrackingCode : 0x03
    USBDI_Version : 0x600
    USBUSER_Version : 0x04
    CheckedPortDriver : 0x00
    CheckedMiniportDriver : 0x00
    USB_Version : 0x00

    ---------- USB Hostcontroller Bandwidth Info ----------
    DeviceCount : 0x00000001 (1)
    TotalBusBandwidth : 0x0006D600 (448000 bits/ms = 56 MB/s)
    Total32secBandwidth : 0x00DAC000 (14336000 bits/32ms = 56 MB/s)
    AllocedBulkAndControl : 0x002BC000 (2867200 bits/32ms = 11.2 MB/s = 20%)
    AllocedIso : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_1ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_2ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_4ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_8ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_16ms : 0x00000000 (0 bits/32ms)
    AllocedInterrupt_32ms : 0x00000000 (0 bits/32ms)


    -------- USB Hostcontroller Power States Info ---------
    SystemState : S0 S1 S2 S3 S4 S5
    HcDevicePowerState : D0 -- -- D3 D3 --
    HcDeviceWake : -- -- -- -- -- --
    HcSystemWake : -- -- -- -- -- --
    RhDevicePowerState : D0 D3 D3 D3 D3 --
    RhDeviceWake : D2 D2 D2 D2 D2 D2
    RhSystemWake : S0 S0 S0 S0 S0 S0
    LastSystemSleepState : -- -- -- -- -- --
    CanWakeup : no no no no no no
    IsPowered : no no no no no no


    ========================= USB Root Hub =========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Device Description : Główny koncentrator USB
    Device Path : \\.\usb#root_hub20#4&13015e7d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Device ID : USB\ROOT_HUB20\4&13015E7D&0
    Hardware IDs : USB\ROOT_HUB20&VID8086&PID27CC&REV0001 USB\ROOT_HUB20&VID8086&PID27CC USB\ROOT_HUB20
    Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0008 (GUID_DEVCLASS_USB)
    Driver : C:\Windows\system32\DRIVERS\usbhub.sys (Version: 6.1.7601.23529 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\usbport.inf
    Legacy BusType : PNPBus
    Class : USB
    Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
    Interface GUID : {f18a0e88-c30c-11d0-8815-00a0c906bed8} (GUID_DEVINTERFACE_USB_HUB)
    Service : usbhub
    Enumerator : USB
    Location Info : -
    Manufacturer Info : (Standardowy kontroler hosta USB)
    Capabilities : 0x80 (SurpriseRemovalOK)
    Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Address : 0
    Power State : D0 (supported: D0, D2, D3, wake from D0, wake from D2)
    Child Device 1 : WALKMAN NWZ-B172
    Device ID : USB\VID_054C&PID_0689\1042C8B1524502
    Class : WPD

    ------------------- USB Hub Descriptor -----------------
    bDescriptorLength : 0x0B (11 bytes)
    bDescriptorType : 0x29 (Hub Descriptor)
    bNumberOfPorts : 0x08 (8 Ports)
    wHubCharacteristics : 0x0000
    Power switching : Ganged
    Compound device : No
    Over-current protection : Global
    TT Think Time : At most 8 FS bit times
    Port Indicators : Not supported
    bPowerOnToPowerGood : 0x02 (4 ms)
    bHubControlCurrent : 0x00 (0 mA)
    DeviceRemovable : 0x00, 0x00
    Bit 0 : 0 (reserved, any value)
    Bit 1 : 0 (Device at Port 1 is removable)
    Bit 2 : 0 (Device at Port 2 is removable)
    Bit 3 : 0 (Device at Port 3 is removable)
    Bit 4 : 0 (Device at Port 4 is removable)
    Bit 5 : 0 (Device at Port 5 is removable)
    Bit 6 : 0 (Device at Port 6 is removable)
    Bit 7 : 0 (Device at Port 7 is removable)
    Bit 8 : 0 (Device at Port 8 is removable)
    Bit 9 : 0 (unused, must be 0)
    Bit10 : 0 (unused, must be 0)
    Bit11 : 0 (unused, must be 0)
    Bit12 : 0 (unused, must be 0)
    Bit13 : 0 (unused, must be 0)
    Bit14 : 0 (unused, must be 0)
    Bit15 : 0 (unused, must be 0)
    PowerControlMask : 0xFF, 0xFF
    HubIsBusPowered : 0x00 (Self Powered)

    ----------------- USB Hub Capabilities ----------------
    HighSpeedCapable : Yes
    HighSpeed : Yes
    MultiTtCapable : No
    HubIsMultiTt : No
    ArmedWakeOnConnect : No
    IsBusPowered : No
    IsRoot : Yes


    =========================== USB Port1 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-1


    =========================== USB Port2 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-2


    =========================== USB Port3 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-3


    =========================== USB Port4 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-4


    =========================== USB Port5 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-5


    =========================== USB Port6 ===========================

    Connection Status : 0x01 (Device is connected)
    Port Chain : 5-6

    ======================== USB Device ========================

    +++++++++++++++++ Device Information ++++++++++++++++++
    Friendly Name : WALKMAN NWZ-B172
    Device Description : WALKMAN NWZ-B172
    Device Path : \\.\usb#vid_054c&pid_0689#1042c8b1524502#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    Device ID : USB\VID_054C&PID_0689\1042C8B1524502
    Hardware IDs : USB\VID_054C&PID_0689&REV_0100 USB\VID_054C&PID_0689
    Driver KeyName : {eec5ad98-8080-425f-922a-dabf3de3f69a}\0015 (GUID_DEVCLASS_WPD)
    Driver : C:\Windows\system32\DRIVERS\WUDFRd.sys (Version: 6.2.9200.16384 Date: 2016-09-24)
    Driver Inf : C:\Windows\inf\wpdmtp.inf
    Legacy BusType : PNPBus
    Class : WPD
    Class GUID : {eec5ad98-8080-425f-922a-dabf3de3f69a} (GUID_DEVCLASS_WPD)
    Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
    Service : WUDFRd
    Enumerator : USB
    Location Info : Port_#0006.Hub_#0005
    Location IDs : PCIROOT(0)#PCI(1D07)#USBROOT(0)#USB(6)
    Container ID : {b9a02282-05db-5025-be37-9484868d4376}
    Manufacturer Info : Sony Corporation
    Capabilities : 0x94 (Removable, UniqueID, SurpriseRemovalOK)
    Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
    Problem Code : 0
    Lower Filters : WinUsb
    Power State : D0 (supported: D0, D3, wake from D0)

    ---------------- Connection Information ---------------
    Connection Index : 0x06 (6)
    Connection Status : 0x01 (DeviceConnected)
    Current Config Value : 0x01
    Device Address : 0x01 (1)
    Is Hub : 0x00 (no)
    Number Of Open Pipes : 0x03 (3)
    Device Bus Speed : 0x02 (High-Speed)
    Pipe0ScheduleOffset : 0x00 (0)
    Pipe1ScheduleOffset : 0x00 (0)
    Pipe2ScheduleOffset : 0x00 (0)

    ------------------ Device Descriptor ------------------
    bLength : 0x12 (18 bytes)
    bDescriptorType : 0x01 (Device Descriptor)
    bcdUSB : 0x200 (USB Version 2.00)
    bDeviceClass : 0x00 (defined by the interface descriptors)
    bDeviceSubClass : 0x00
    bDeviceProtocol : 0x00
    bMaxPacketSize0 : 0x40 (64 bytes)
    idVendor : 0x054C (Sony Corporation)
    idProduct : 0x0689
    bcdDevice : 0x0100
    iManufacturer : 0x01 (String Descriptor 1)
    Language 0x0409 : "SONY"
    iProduct : 0x02 (String Descriptor 2)
    Language 0x0409 : "WALKMAN"
    iSerialNumber : 0x08 (String Descriptor 8)
    Language 0x0409 : "1042C8B1524502"
    bNumConfigurations : 0x01

    ------------------ String Descriptors -----------------
    ------ String Descriptor 0 ------
    bLength : 0x04 (4 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language ID[0] : 0x0409 (English - United States)
    ------ String Descriptor 1 ------
    bLength : 0x0A (10 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "SONY"
    ------ String Descriptor 2 ------
    bLength : 0x10 (16 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "WALKMAN"
    ------ String Descriptor 3 ------
    bLength : 0x26 (38 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "USB/MSC LCD Player"
    ------ String Descriptor 4 ------
    bLength : 0x26 (38 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "USB/MSC LCD Player"
    ------ String Descriptor 5 ------
    bLength : 0x42 (66 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "0BFB0000B121529D0002DDA68275129D"
    ------ String Descriptor 6 ------
    bLength : 0x20 (32 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "STMP377x-XX-100"
    ------ String Descriptor 7 ------
    bLength : 0x12 (18 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "MSFT100" *!*CAUTION contains character below 0x20
    ------ String Descriptor 8 ------
    bLength : 0x1E (30 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    Language 0x0409 : "1042C8B1524502"
    --- MSFT String Descriptor 0xEE --
    bLength : 0x12 (18 bytes)
    bDescriptorType : 0x03 (String Descriptor)
    qwSignature Lang 0x0409 : "MSFT100"
    bMS_VendorCode : 0x01
    bPad : 0x00

    ---------------- Configuration Descriptor -----------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x02 (Configuration Descriptor)
    wTotalLength : 0x0027 (39 bytes)
    bNumInterfaces : 0x01
    bConfigurationValue : 0x01
    iConfiguration : 0x03 (String Descriptor 3)
    Language 0x0409 : "USB/MSC LCD Player"
    bmAttributes : 0x80
    D7: Reserved, set 1 : 0x01
    D6: Self Powered : 0x00 (no)
    D5: Remote Wakeup : 0x00 (no)
    D4..0: Reserved, set 0 : 0x00
    MaxPower : 0xFA (500 mA)

    ---------------- Interface Descriptor -----------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x04 (Interface Descriptor)
    bInterfaceNumber : 0x00
    bAlternateSetting : 0x00
    bNumEndpoints : 0x03 (3 Endpoints)
    bInterfaceClass : 0x08 (Mass Storage)
    bInterfaceSubClass : 0x06 (SCSI transparent command set)
    bInterfaceProtocol : 0x50 (Bulk­Only Transport)
    iInterface : 0x04 (String Descriptor 4)
    Language 0x0409 : "USB/MSC LCD Player"

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
    bmAttributes : 0x02 (TransferType=Bulk)
    wMaxPacketSize : 0x0200 (max 512 bytes)
    bInterval : 0x00 (never NAKs)

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x02 (Direction=OUT EndpointID=2)
    bmAttributes : 0x02 (TransferType=Bulk)
    wMaxPacketSize : 0x0200 (max 512 bytes)
    bInterval : 0x00 (never NAKs)

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x83 (Direction=IN EndpointID=3)
    bmAttributes : 0x03 (TransferType=Interrupt)
    wMaxPacketSize : 0x0040
    Bits 15..13 : 0x00 (reserved, must be zero)
    Bits 12..11 : 0x00 (0 additional transactions per microframe -> allows 1..1024 bytes per packet)
    Bits 10..0 : 0x40 (64 bytes per packet)
    bInterval : 0x10 (16 ms)

    ---------- Other Speed Configuration Descriptor -----------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x07 (Other_speed_configuration Descriptor)
    wTotalLength : 0x0027 (39 bytes)
    bNumInterfaces : 0x01
    bConfigurationValue : 0x01
    iConfiguration : 0x03 (String Descriptor 3)
    Language 0x0409 : "USB/MSC LCD Player"
    bmAttributes : 0x80
    D7: Reserved, set 1 : 0x01
    D6: Self Powered : 0x00 (no)
    D5: Remote Wakeup : 0x00 (no)
    D4..0: Reserved, set 0 : 0x00
    MaxPower : 0xFA (500 mA)

    ---------------- Interface Descriptor -----------------
    bLength : 0x09 (9 bytes)
    bDescriptorType : 0x04 (Interface Descriptor)
    bInterfaceNumber : 0x00
    bAlternateSetting : 0x00
    bNumEndpoints : 0x03 (3 Endpoints)
    bInterfaceClass : 0x08 (Mass Storage)
    bInterfaceSubClass : 0x06 (SCSI transparent command set)
    bInterfaceProtocol : 0x50 (Bulk­Only Transport)
    iInterface : 0x04 (String Descriptor 4)
    Language 0x0409 : "USB/MSC LCD Player"

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
    bmAttributes : 0x02 (TransferType=Bulk)
    wMaxPacketSize : 0x0040 (max 64 bytes)
    bInterval : 0x00 (never NAKs)

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x02 (Direction=OUT EndpointID=2)
    bmAttributes : 0x02 (TransferType=Bulk)
    wMaxPacketSize : 0x0040 (max 64 bytes)
    bInterval : 0x00 (never NAKs)

    ----------------- Endpoint Descriptor -----------------
    bLength : 0x07 (7 bytes)
    bDescriptorType : 0x05 (Endpoint Descriptor)
    bEndpointAddress : 0x83 (Direction=IN EndpointID=3)
    bmAttributes : 0x03 (TransferType=Interrupt)
    wMaxPacketSize : 0x0040
    Bits 15..13 : 0x00 (reserved, must be zero)
    Bits 12..11 : 0x00 (0 additional transactions per microframe -> allows 1..1024 bytes per packet)
    Bits 10..0 : 0x40 (64 bytes per packet)
    bInterval : 0x10 (16 ms)

    =========================== USB Port7 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-7


    =========================== USB Port8 ===========================

    Connection Status : 0x00 (No device is connected)
    Port Chain : 5-8

  • Pomocny post
    Spec od pamięci masowych
    cynamonik napisał:
    poniżej raport i screen z programu USB Device Tree Viewer.. tu już jest widoczny :)

    Iluzja. :D

    W USBDeview odszukaj to urządzenie i daj zrzut z jego "Właściwości". :idea:
    https://www.elektroda.pl/rtvforum/viewtopic.php?p=16189985#16189985
  • Poziom 9  
    już załączam:

    mp3,sony, nwz-b172 - odzyskanie danych

    Moderowany przez RADU23:

    Edytowałem post, usuwając niecenzuralny obrazek.
    Ostrzeżenie.
    3.1.5. Rozpowszechnianie treści o charakterze pornograficznym.





    p.s. jeśli z opcji zaptaszkuję "wyświetl tylko urządzenia z literą dysku to w ogóle ten pendrive się nie pojawi na liście
  • Pomocny post
    Spec od pamięci masowych
    pidar napisał:
    Iluzja. :D

    I po "iluzji" (patrz na datę i czas). :wink:
    mp3,sony, nwz-b172 - odzyskanie danych

    Coś dodatkowo "klikałeś" w USB Device Tree Viewer :?:

    EDIT:
    cynamonik napisał:
    nie otrzymuje też charakterystycznej litery w nawiasie, jak np każdy pendrive i nie można "softwarowo" usunąć urządzenia z systemu.

    1. Zastosuj ten FIX:
    https://support.microsoft.com/pl-pl/help/1761...tically-diagnose-and-fix-windows-usb-problems
    (FIX spakowany w załączniku)
    Jeśli znajdzie problemy to kliknij -> Wyświetl szczegółowe informacje (patrz przykład poniżej).
    mp3,sony, nwz-b172 - odzyskanie danych
    2. Uruchom USBLogView i podłącz to urządzenie (dodaj screen do analizy).
    https://www.elektroda.pl/rtvforum/viewtopic.php?p=15866622#15866622
    Załączniki:
  • Poziom 9  
    fix sugerował uruchomienie windows update... czego na pewno nie zrobię :)
    dlatego w szczegółach jest komunikat "Usługa Windows Update została skonfigurowana tak, aby nigdy nie aktualizować sterowników"

    mp3,sony, nwz-b172 - odzyskanie danych

    porty w tym komputerze działały bez problemu. wydaje mi się, że problem jest po stronie urządzenia.. i jest tak skonfigurowane, żeby po podłączeniu pokazywało się tak jak pokazuje. zatem może na nim się skupmy ? :)

    załączam log z programu USBLogView..

    ==================================================
    Event Type : Plug
    Event Time : 2017-01-22 17:22:47
    Device Name : Port_#0005.Hub_#0005
    Description : WALKMAN NWZ-B172
    Device Type : Unknown
    Drive Letter :
    Serial Number : 1042C8Bxxxxxxx
    Vendor ID : 054c
    Product ID : 0689
    Vendor Name : Sony Corp.
    Product Name :
    Firmware Revision : 1.00
    USB Class : 00
    USB SubClass : 00
    USB Protocol : 00
    ==================================================
  • Spec od pamięci masowych
    cynamonik napisał:
    Na szczęście, urządzenie jest w tej chwili sprawne.

    Co rozumiesz przez sprawne, odtwarzasz jakieś mp3 na tym urządzeniu :?:

    Przez port USB nie ma dostępu do pamięci (kość Samsung-a).
    Jeśli ważne dane to już tylko pozostaje dokonanie (próba) odczytu bezpośredniego.
  • Poziom 9  
    tak dokładnie działają wszystkie funkcje urządzenia. mogę odtwarzać pliki mp3.

    zależy mi na odczytaniu tego co było zapisane wcześniej :)

    Pidar,
    jesteś w stanie podpowiedzieć jak dokonać odczytu bezpośredniego.. bo właśnie o nim myślałem wcześniej. lutownicy się nie boję