Need Help:Telefunken D32H278A3 / 17MB82S

Hello,

i am new in this Forum.I am from Germany.My Problem:
I have an Telefunken LED TV Model: D32H278R3
The Motherboard Vester 17MB82 is broken.
I buy on Ebay an other Board from an Telefunken D32H278A3.
Now the Picture ist standing on the Head and the Picture ist very Bad.

Motherboard: 17MB82S
Power Supply:17IPS71
Panel:VES315WNDL-2D-N02

Here some Picture from the TV.

Ok,it is not the right T-CON Board.Does the right T-CON board work with the VES315WNDL-2D-N02 panel?
In the service menu one can make some settings but panel does not select. A little at the color and sound.
An update via USB does not go.USB Stick is detected. File does not go (08_nolu_yazilim_V.084/upgrade_loader.pkg)
Wong Software?
A USB log I could make(USB trace.log).

Or I sell everything back on Ebay.
I do not know what's wrong with the old board.
CPU? RAM? Flash?

Is the Software in the Winbond Chips ?

Can i flash the Winbond Chips ?

What can i do?

Who can help me,please ?

Greetings from Germany

Martin

Maybe one bin. will be good, the same panel what yours
1.
Telefunken D32H125N2
17MB82-2 Vestel
MT5820LUNU
25QH16_u10
25QH64_u12
Panel: VES315WNDB-01
2.
Telefunken D32H127N2
17MB82-1a
MT5820LUNU
U10 cFeon QH16
U12 cFeon Q64
Panel: VES315WNDB-01

Moderated By MOD:

Hi,thank you but U10 is a 25Q32FVSIG and the U12 is a 25Q64VFSIG.
Can I still take the files?

CU-Martin

MartinBth wrote:

Hi,thank you but U10 is a 25Q32FVSIG and the U12 is a 25Q64VFSIG.
Can I still take the files?

CU-Martin

Hi, Martin!

Please upload here dump of U10/U12 (25Q32 & 25Q64) of your matherboard. I want compare the contents with other firmware.I have now the same model - Telefunken D32H278KT3

Genady

I can only start in 4-5 days.

Hooray ,

my TV works again.I solder the old(from D32H278R3) Winbond Chips to the other Board(R32H278A3).Before I soldered I created a dump from the Chips.With Raspberry and Flashron Software.I have wrote new Winbonds and solder it but it works not.I think the CPU from the old Board is dead.Or not?I wrote the new Chips with Images/Dumps from a Polish Board.The Size was correct.
When anywone needs my Dumps(D32H278R3 and R32H278A3) can i post it.
Ok,see you next Time
Martin

The Dumps are here.Size must be correct.For W25Q32 and W25Q64

Very good! Thank you very match!

Best regards
Genady