Witam. W końcu dało mi się znaleźć w sieci zagranicznych portali jak powinno wyglądać menu serwisowe Samsung UE50H6400.
Jeśli ktokolwiek z Was dokonał zmian i okazało się, że przyniosło to odwrotne skutki od zamierzonych to podaję wartości fabryczne. Przywrócenie wartości fabrycznych nie przynosi niestety odwrócenia zmian.
UWAGA
Robisz to na własną odpowiedzialność. Ja zastosowałem i wszystko wróciło do normy.
A więc wygląda to tak:
Default Status (current)
T-MST14DEUC-2130.0
T-MST14DEUS-1008
BT Version: 2.1.1.14.498(BSA0106_00.25H4)
E-Manual: X14DVBEUH-1.107
Camera Version: 1.44.38
Blaster Version: 258401-258311-3000001
EDID SUCCESS
CALIB: AV / COMP / PC / HDMI /
Option: 55A1AF0V,…,…,NONE
SDAL-X14H-DEU_RCA-6100-5306
RFS:”X14 0135” KER/ 0 2014-12-04
KERNEL: 8.1150, D/
DTP-DTVTD-4517-05-0058
Backend[FOX-FT3] Panel[120Hz]
FW[3117] Data[000C]
TCON Version: H55A1F603
Model: UE55H6500
Wired MAC ----
Wireless MAC ----
WIFI: ATH6KL(5.0.0.99_0623)
CIP SUCCESS
CO NfO WO MO D/ HO PO AO O S/ N/
Factory Data: 227/EERC Ver: 144
SmartControl:00000000/6560
DTP-BP-HAL-4517-02-X14_DEU_RCA-046
DTP-BP-MW-4517-53
DTP-BP-APP-4517-02-136
POP-FLA-14-FHD_SMART-040.1
Date of Purchase 9/6/2014
Option
Factory Reset
Type: 55A1AF0V
Tuner: D_TCS2
Ch Table: NONE
MTR Option
Front Color: U-S-V-65
Lvds Format: JEIDA
Region: PANEURO (not modifiable)
WIFI REGION: E
OTN Support: ON
OTA Support: General
MediaPlay DLNA: … (not modifiable)
Num of PVR RECORD: 1
Select LCD/PDP: LCD
e-Pop Default: ON
CAMERA Support: OFF
3D Support: ON
BT Support: ON
BT ADDRESS: 508569e266c2 (yours will be different, lol)
Smart Control Support: ON
Motion Recog: OFF
Voice Recog: ON
Virtual Remocon Color: Black
Local Dimming Panel: OFF
Wifi Vendor: QCA
Engineer Option
5 Way Function Key: R_BACK
Contents Bar: OFF
Standby let on/off: OFF
IF AGC: 0
D AGC: 0
PH BW: 0
FQ BW: 0
PH RATE: 0
PD EN: 0
Num of Network Stream: 1
BT_AUDIO_ON_OFF: OFF
Config_AV_PATH: <empty>
USING_PSI_UPDATE: … (not modifiable)
ECO Standby: OFF
Fast Logo Delay: 0
Num of PANEL KEY: 6
Panel Detail 0
Panel Init Time 250
Tcon Init Time: 200
Control
EDID
EDID ON/OFF: OFF
EDID WRITE ALL: … (not modifiable, EDID is off)
EDID WRITE PC: … (not modifiable, EDID is off)
EDID WRITE HDMI: … (not modifiable, EDID is off)
EDID WRITE HDMI1: … (not modifiable, EDID is off)
EDID WRITE HDMI2: … (not modifiable, EDID is off)
EDID WRITE HDMI3: … (not modifiable, EDID is off)
EDID WRITE HDMI4: … (not modifiable, EDID is off)
EDID VER: … (not modifiable, EDID is off)
EDID PORT: … (not modifiable, EDID is off)
EDID WRITE DVI: … (not modifiable, EDID is off)
Sub Option
RS-232 Jack: UART
Serial Log On/Off: OFF
Watchdog: ON
FRC Monitoring: OFF
Fast Boot in Production: OFF
UART Enable: OFF
ECO IC TYPE: MC8121
MediapPlay DB: … (not modifiable)
OPTION_SWU
OTN Server Type: operating
OTN Test Server: OFF
SWU Reset
SWU Duration: OFF
SWU Fail Test: OFF
OPTION_NUM: (does nothing seemingly)
RM
Server Type: Operating
RTS Mode: OFF
PSA
FKP Download 1: 0
FKP Download 2: 0
LMK threshold: 4
Low threshold: 0
High threshold: 0
CSB: ON
CLB: ON
EEPG Enable: 0
Last Screen: OFF
App Resume: ON
BP PMS Reset: 1
FAnet Thread: 2
AMC_MC: ON
Support Minibrowser: ON
HotkeyList: 6400_SC
FS_FAV: ON
PDP Option
LOGIC Waveform Day: 0
Hotel Option
Hospitality Mode: OFF
Power On: <empty> (not modifiable, Hospitality mode is off)
Menu OSD: <empty> (not modifiable, Hospitality mode is off)
Music Mode: <empty> (not modifiable, Hospitality mode is off)
External Source: <empty> (not modifiable, Hospitality mode is off)
Eco Solution: <empty> (not modifiable, Hospitality mode is off)
Cloning: <empty> (not modifiable, Hospitality mode is off)
Shop Option
Shop Mode: OFF
Exhibition Mode: OFF
3D Cube: OFF
Asia Option: (does nothing seemingly, guessing PANEURO region stops this :>)
Sound
Carrier_Mute: OFF
High Devi: OFF
Speaker Delay Normal: 0x0Ah
A2 Ident Low THLD: 9
Pilot Level High Thld: 0x28h
Pilot Level Low Thld: 0x10h
Sig Error On: 35
Sig Error Off: 41
Woofer Volume: 0xcbh
Woofer Local EQ Checksum: 0
Speaker EQ: ON
Local Speaker EQ: 0
Local EQ Checksum: 0
SRS Tuning Parm: 4
India Sound: OFF
AudioDock BT delay: 100
Wall Filter Type: 0
Bottom CheckSum: 0
Bottom Local CheckSum: 0
Debug
MICOM POWER OFF: OFF
RF Mute Time: 6ms
CI+1.3: ON
FRC
Home Panel FRC: ON
DDR Test: 0
Tuner Margin: 10
MPEG Margin: 100
H.264 Margin: 100
TS Clock delay: 0
TCON_TEMP read: 48.83
TEMP LAST 48.25
DCC Version: 0x6C
DCC CHK SEL: 0
DCC CHECK LOCAL: 0x0
DCC CHECK TOTAL: 0x0
MulitACC Checksum: 0
Tuner Status
DVB
SNR: 0
BER: 0
Signal Strength: 0
Bandwidth: 0
Frequency: 0
LNA Status: 0
FFT: 0
Modulation: 0
Code Rate: 0
GI: 0
Hier Modulation: 0
Frequency Offset: 0
Timing Offset: 0
AGC: 0
UCB: 0
PLL Type: 0
DEMOD Type: 0
TPS Lock: 0
RS Lock: 0
SSI: 0
SQI: 0
Firmware Version: 0
ISDB-T
FFT Size_1: 0
Freq. Offset_1: 0
SNR_1: 0
IF AGC_1: 0
TMCC Lock_1: 0
TS Packet_1: 0
Master Lock_1: 0
A_Modulation_1: 0
A_Code Rate_1: 0
A_Timer InterLeave_1: 0
A_Segments Num_1: 0
A_BER_1: 0
B_Modulation_1: 0
B_Code Rate_1: 0
B_Timer InterLeave_1: 0
B_Segments Num_1: 0
B_BER_1: 0
C_Modulation_1: 0
C_Code Rate_1: 0
C_Timer InterLeave_1: 0
C_Segments Num_1: 0
C_BER_1: 0
RM_BIST_DTV: 0
RM_BIST_ATV: 0
Voice Debug: OFF
SVC
Self Diagnosis
Loop Back
LAN Test
AV Audio Test: Failure
DVIN Audio Test: Failure
CVBS Test: NG
Comp Test: Failure
USB HUB Test
HDMI Test: ng/ng/ng/ng
SCART Audio Test: Failure
SCART CVBS Test: NG
SCART RGB Test: NG
PC Audio Test: Failure
PC Self Test: Failure
CPU: … (not modifiable)
DDR
FLASH
EEPROM
HDMI Switch IC: … (not modifiable)
USB HUB IC
WIFI
LVDS
T-CON/FRC
PCB Test: … (not modifiable)
MOIP: … (not modifiable)
App Self Test
Device Self Test
Voltage: … (not modifiable)
EcoSensor
BT
EXT Sound Inspection
Wooster Sound Inspection: NONE
ATV CH Inspection: NG
DTV CH Inspection
Satellite CH Inspection
Aging Line Test
Info
SVC Info: 0
LOG (View Log)
ER Count
Panel Display Time: 457Hr ta wartość określa jak długo TV był włączony. Wartość inna u każdego.
Factory Entry Number: 5 ta wartość nie jest ustawiana.
Factory Execution History
Factory Reset History
Upgrade
T-CON Usb Download: Failure
T-CON CheckSum: N/A
Logic Usb D/L: … (not modifiable)
SUBMICOM UPGRADE: Ready
BT UPGRADE
BT FREEPAIRING
Function Upgrade: Failure
FRC3D FW Upgrade
FRC3D LD UPGRADE: Failure
Camera Upgrade
Mic Upgrade
CPLD USB Download
JP MICOM UPGRADE: Failure
DP MICOM UPGRADE: Failure
Jump Upgrade: Failure
IR Blaster Upgrade: Failure
IR Blaster delay time: 50
CPLD Download
LDC Profile Upgrade: *
Pic Data USB Update: VER:0x0010
Audio Data USB Update: 0
Eco Data USB Update: VER:0x0028
SC ADK Upgrade: Failure
SC MBR Upgrade: Failure
Reset
Smart Hub Reset: 0
Factory Rst: 0
OPTION_HDMI
DVI/HDMI SOUND: Auto
HDMI HOT PLUG: Disable
HOTPLUG SWITCHING: Boot
HOT PLUG DURATION: 1200ms
CLK TERM DURATION: 1200ms
HDMI FLT CNT SIG: 100ms
HDMI FLT CNT LOS: 100ms
UNSTABLE BAN CNT: 5000ms
HDMI ROBIN: ON
HDMI Callback: OFF
HDMI CTS Thld: 8
HDMI CTS Cnt1: 1
HDMI EQ: AUTO
DVI SET TIME: 300ms
HDMI Sync: DE
HDMI 3D DET: 0
HOT PLUG OFF HOLD TIME
HDMI Stable Count: 1 (not modifiable)
DVB CI
TS Clock Delay TC: 0
TS Clock delay S: 0
CI Control Buf On: ON
TS Clock delay CPU: -1
Test Pattern
Pattern Sel: OFF
Logic Pattern Sel: 0
Logic Level Sel
FRC Pre Test Pattern: 0
FRC Post Test Pattern: 0
SOC TCON Test Pattern: 0
SOC TCON Pattern Level: 255
SOC TCON FRC Pattern: 0
HDMI WB Pattern: OFF
HDMI Pattern Sel: 0
Parma Pre Test Pattern: 0
Parma Post Test Pattern: 0
FRC OSD Pre Pattern: 0
RC OSD Post Pattern: 0
Other Setting
Delete S/N: 0
Expert
CAL Data Backup: … (not modifiable)
CAL Data Restore
ATV IF AGC SPEED: 0
Auto Power: LAST POWER
SVC Panel: ORIGINAL
ADC/WB
ADC
AV Calibration: / (not modifiable)
Comp Calibration: / (not modifiable)
PC Calibration: / (not modifiable)
HDMI Calibration: / (not modifiable)
ADC Result
1st_Y_GH: 0
1st_Y_GL: 0
1st_Cb_BH: 0
1st_Cb_BL: 0
1st_Cr_RH: 0
1st_Cr_RL: 0
2nd_R_L: 134
2nd_G_L: 134
2nd_B_L: 134
2nd_R_H: 49
2nd_G_H: 49
2nd_B_H: 49
White Balance
R-Offset: 128
G-Offset: 128
B-Offset: 128
R-Gain: 136
G-Gain: 128
B-Gain: 143
WB_W2_R_Offset: 128 (not modifiable)
WB_W2_B_Offset: 128 (not modifiable)
WB_W2_R_Gain: 163 (not modifiable)
WB_W2_B_Gain: 86 (not modifiable)
WB_N_R_Offset: 128 (not modifiable)
WB_N_B_Offset: 128 (not modifiable)
WB_N_R_Gain: 158 (not modifiable)
WB_N_B_Gain: 124 (not modifiable)
MGA
MGA On/Off: OFF
R1_Gain: 514 (not modifiable, MGA is off)
G1_Gain: 522 (not modifiable, MGA is off)
B1_Gain: 524 (not modifiable, MGA is off)
R2_Gain: 512 (not modifiable, MGA is off)
G2_Gain: 520 (not modifiable, MGA is off)
B2_Gain: 522 (not modifiable, MGA is off)
R3_Gain: 508 (not modifiable, MGA is off)
G3_Gain: 514 (not modifiable, MGA is off)
B3_Gain: 516 (not modifiable, MGA is off)
R4_Gain: 506 (not modifiable, MGA is off)
G4_Gain: 508 (not modifiable, MGA is off)
B4_Gain: 512 (not modifiable, MGA is off)
R5_Gain: 504 (not modifiable, MGA is off)
G5_Gain: 508 (not modifiable, MGA is off)
B5_Gain: 512 (not modifiable, MGA is off)
R6_Gain: 504 (not modifiable, MGA is off)
G6_Gain: 510 (not modifiable, MGA is off)
B6_Gain: 514 (not modifiable, MGA is off)
R7_Gain: 504 (not modifiable, MGA is off)
G7_Gain: 510 (not modifiable, MGA is off)
B7_Gain: 514 (not modifiable, MGA is off)
R8_Gain: 506 (not modifiable, MGA is off)
G8_Gain: 512 (not modifiable, MGA is off)
B8_Gain: 512 (not modifiable, MGA is off)
R9_Gain: 510 (not modifiable, MGA is off)
G9_Gain: 512 (not modifiable, MGA is off)
B9_Gain: 512 (not modifiable, MGA is off)
R10_Gain: 512 (not modifiable, MGA is off)
G10_Gain: 512 (not modifiable, MGA is off)
B10_Gain: 512 (not modifiable, MGA is off)
Advanced: nothing?
Jeśli ktokolwiek z Was dokonał zmian i okazało się, że przyniosło to odwrotne skutki od zamierzonych to podaję wartości fabryczne. Przywrócenie wartości fabrycznych nie przynosi niestety odwrócenia zmian.
UWAGA
Robisz to na własną odpowiedzialność. Ja zastosowałem i wszystko wróciło do normy.
A więc wygląda to tak:
Default Status (current)
T-MST14DEUC-2130.0
T-MST14DEUS-1008
BT Version: 2.1.1.14.498(BSA0106_00.25H4)
E-Manual: X14DVBEUH-1.107
Camera Version: 1.44.38
Blaster Version: 258401-258311-3000001
EDID SUCCESS
CALIB: AV / COMP / PC / HDMI /
Option: 55A1AF0V,…,…,NONE
SDAL-X14H-DEU_RCA-6100-5306
RFS:”X14 0135” KER/ 0 2014-12-04
KERNEL: 8.1150, D/
DTP-DTVTD-4517-05-0058
Backend[FOX-FT3] Panel[120Hz]
FW[3117] Data[000C]
TCON Version: H55A1F603
Model: UE55H6500
Wired MAC ----
Wireless MAC ----
WIFI: ATH6KL(5.0.0.99_0623)
CIP SUCCESS
CO NfO WO MO D/ HO PO AO O S/ N/
Factory Data: 227/EERC Ver: 144
SmartControl:00000000/6560
DTP-BP-HAL-4517-02-X14_DEU_RCA-046
DTP-BP-MW-4517-53
DTP-BP-APP-4517-02-136
POP-FLA-14-FHD_SMART-040.1
Date of Purchase 9/6/2014
Option
Factory Reset
Type: 55A1AF0V
Tuner: D_TCS2
Ch Table: NONE
MTR Option
Front Color: U-S-V-65
Lvds Format: JEIDA
Region: PANEURO (not modifiable)
WIFI REGION: E
OTN Support: ON
OTA Support: General
MediaPlay DLNA: … (not modifiable)
Num of PVR RECORD: 1
Select LCD/PDP: LCD
e-Pop Default: ON
CAMERA Support: OFF
3D Support: ON
BT Support: ON
BT ADDRESS: 508569e266c2 (yours will be different, lol)
Smart Control Support: ON
Motion Recog: OFF
Voice Recog: ON
Virtual Remocon Color: Black
Local Dimming Panel: OFF
Wifi Vendor: QCA
Engineer Option
5 Way Function Key: R_BACK
Contents Bar: OFF
Standby let on/off: OFF
IF AGC: 0
D AGC: 0
PH BW: 0
FQ BW: 0
PH RATE: 0
PD EN: 0
Num of Network Stream: 1
BT_AUDIO_ON_OFF: OFF
Config_AV_PATH: <empty>
USING_PSI_UPDATE: … (not modifiable)
ECO Standby: OFF
Fast Logo Delay: 0
Num of PANEL KEY: 6
Panel Detail 0
Panel Init Time 250
Tcon Init Time: 200
Control
EDID
EDID ON/OFF: OFF
EDID WRITE ALL: … (not modifiable, EDID is off)
EDID WRITE PC: … (not modifiable, EDID is off)
EDID WRITE HDMI: … (not modifiable, EDID is off)
EDID WRITE HDMI1: … (not modifiable, EDID is off)
EDID WRITE HDMI2: … (not modifiable, EDID is off)
EDID WRITE HDMI3: … (not modifiable, EDID is off)
EDID WRITE HDMI4: … (not modifiable, EDID is off)
EDID VER: … (not modifiable, EDID is off)
EDID PORT: … (not modifiable, EDID is off)
EDID WRITE DVI: … (not modifiable, EDID is off)
Sub Option
RS-232 Jack: UART
Serial Log On/Off: OFF
Watchdog: ON
FRC Monitoring: OFF
Fast Boot in Production: OFF
UART Enable: OFF
ECO IC TYPE: MC8121
MediapPlay DB: … (not modifiable)
OPTION_SWU
OTN Server Type: operating
OTN Test Server: OFF
SWU Reset
SWU Duration: OFF
SWU Fail Test: OFF
OPTION_NUM: (does nothing seemingly)
RM
Server Type: Operating
RTS Mode: OFF
PSA
FKP Download 1: 0
FKP Download 2: 0
LMK threshold: 4
Low threshold: 0
High threshold: 0
CSB: ON
CLB: ON
EEPG Enable: 0
Last Screen: OFF
App Resume: ON
BP PMS Reset: 1
FAnet Thread: 2
AMC_MC: ON
Support Minibrowser: ON
HotkeyList: 6400_SC
FS_FAV: ON
PDP Option
LOGIC Waveform Day: 0
Hotel Option
Hospitality Mode: OFF
Power On: <empty> (not modifiable, Hospitality mode is off)
Menu OSD: <empty> (not modifiable, Hospitality mode is off)
Music Mode: <empty> (not modifiable, Hospitality mode is off)
External Source: <empty> (not modifiable, Hospitality mode is off)
Eco Solution: <empty> (not modifiable, Hospitality mode is off)
Cloning: <empty> (not modifiable, Hospitality mode is off)
Shop Option
Shop Mode: OFF
Exhibition Mode: OFF
3D Cube: OFF
Asia Option: (does nothing seemingly, guessing PANEURO region stops this :>)
Sound
Carrier_Mute: OFF
High Devi: OFF
Speaker Delay Normal: 0x0Ah
A2 Ident Low THLD: 9
Pilot Level High Thld: 0x28h
Pilot Level Low Thld: 0x10h
Sig Error On: 35
Sig Error Off: 41
Woofer Volume: 0xcbh
Woofer Local EQ Checksum: 0
Speaker EQ: ON
Local Speaker EQ: 0
Local EQ Checksum: 0
SRS Tuning Parm: 4
India Sound: OFF
AudioDock BT delay: 100
Wall Filter Type: 0
Bottom CheckSum: 0
Bottom Local CheckSum: 0
Debug
MICOM POWER OFF: OFF
RF Mute Time: 6ms
CI+1.3: ON
FRC
Home Panel FRC: ON
DDR Test: 0
Tuner Margin: 10
MPEG Margin: 100
H.264 Margin: 100
TS Clock delay: 0
TCON_TEMP read: 48.83
TEMP LAST 48.25
DCC Version: 0x6C
DCC CHK SEL: 0
DCC CHECK LOCAL: 0x0
DCC CHECK TOTAL: 0x0
MulitACC Checksum: 0
Tuner Status
DVB
SNR: 0
BER: 0
Signal Strength: 0
Bandwidth: 0
Frequency: 0
LNA Status: 0
FFT: 0
Modulation: 0
Code Rate: 0
GI: 0
Hier Modulation: 0
Frequency Offset: 0
Timing Offset: 0
AGC: 0
UCB: 0
PLL Type: 0
DEMOD Type: 0
TPS Lock: 0
RS Lock: 0
SSI: 0
SQI: 0
Firmware Version: 0
ISDB-T
FFT Size_1: 0
Freq. Offset_1: 0
SNR_1: 0
IF AGC_1: 0
TMCC Lock_1: 0
TS Packet_1: 0
Master Lock_1: 0
A_Modulation_1: 0
A_Code Rate_1: 0
A_Timer InterLeave_1: 0
A_Segments Num_1: 0
A_BER_1: 0
B_Modulation_1: 0
B_Code Rate_1: 0
B_Timer InterLeave_1: 0
B_Segments Num_1: 0
B_BER_1: 0
C_Modulation_1: 0
C_Code Rate_1: 0
C_Timer InterLeave_1: 0
C_Segments Num_1: 0
C_BER_1: 0
RM_BIST_DTV: 0
RM_BIST_ATV: 0
Voice Debug: OFF
SVC
Self Diagnosis
Loop Back
LAN Test
AV Audio Test: Failure
DVIN Audio Test: Failure
CVBS Test: NG
Comp Test: Failure
USB HUB Test
HDMI Test: ng/ng/ng/ng
SCART Audio Test: Failure
SCART CVBS Test: NG
SCART RGB Test: NG
PC Audio Test: Failure
PC Self Test: Failure
CPU: … (not modifiable)
DDR
FLASH
EEPROM
HDMI Switch IC: … (not modifiable)
USB HUB IC
WIFI
LVDS
T-CON/FRC
PCB Test: … (not modifiable)
MOIP: … (not modifiable)
App Self Test
Device Self Test
Voltage: … (not modifiable)
EcoSensor
BT
EXT Sound Inspection
Wooster Sound Inspection: NONE
ATV CH Inspection: NG
DTV CH Inspection
Satellite CH Inspection
Aging Line Test
Info
SVC Info: 0
LOG (View Log)
ER Count
Panel Display Time: 457Hr ta wartość określa jak długo TV był włączony. Wartość inna u każdego.
Factory Entry Number: 5 ta wartość nie jest ustawiana.
Factory Execution History
Factory Reset History
Upgrade
T-CON Usb Download: Failure
T-CON CheckSum: N/A
Logic Usb D/L: … (not modifiable)
SUBMICOM UPGRADE: Ready
BT UPGRADE
BT FREEPAIRING
Function Upgrade: Failure
FRC3D FW Upgrade
FRC3D LD UPGRADE: Failure
Camera Upgrade
Mic Upgrade
CPLD USB Download
JP MICOM UPGRADE: Failure
DP MICOM UPGRADE: Failure
Jump Upgrade: Failure
IR Blaster Upgrade: Failure
IR Blaster delay time: 50
CPLD Download
LDC Profile Upgrade: *
Pic Data USB Update: VER:0x0010
Audio Data USB Update: 0
Eco Data USB Update: VER:0x0028
SC ADK Upgrade: Failure
SC MBR Upgrade: Failure
Reset
Smart Hub Reset: 0
Factory Rst: 0
OPTION_HDMI
DVI/HDMI SOUND: Auto
HDMI HOT PLUG: Disable
HOTPLUG SWITCHING: Boot
HOT PLUG DURATION: 1200ms
CLK TERM DURATION: 1200ms
HDMI FLT CNT SIG: 100ms
HDMI FLT CNT LOS: 100ms
UNSTABLE BAN CNT: 5000ms
HDMI ROBIN: ON
HDMI Callback: OFF
HDMI CTS Thld: 8
HDMI CTS Cnt1: 1
HDMI EQ: AUTO
DVI SET TIME: 300ms
HDMI Sync: DE
HDMI 3D DET: 0
HOT PLUG OFF HOLD TIME
HDMI Stable Count: 1 (not modifiable)
DVB CI
TS Clock Delay TC: 0
TS Clock delay S: 0
CI Control Buf On: ON
TS Clock delay CPU: -1
Test Pattern
Pattern Sel: OFF
Logic Pattern Sel: 0
Logic Level Sel
FRC Pre Test Pattern: 0
FRC Post Test Pattern: 0
SOC TCON Test Pattern: 0
SOC TCON Pattern Level: 255
SOC TCON FRC Pattern: 0
HDMI WB Pattern: OFF
HDMI Pattern Sel: 0
Parma Pre Test Pattern: 0
Parma Post Test Pattern: 0
FRC OSD Pre Pattern: 0
RC OSD Post Pattern: 0
Other Setting
Delete S/N: 0
Expert
CAL Data Backup: … (not modifiable)
CAL Data Restore
ATV IF AGC SPEED: 0
Auto Power: LAST POWER
SVC Panel: ORIGINAL
ADC/WB
ADC
AV Calibration: / (not modifiable)
Comp Calibration: / (not modifiable)
PC Calibration: / (not modifiable)
HDMI Calibration: / (not modifiable)
ADC Result
1st_Y_GH: 0
1st_Y_GL: 0
1st_Cb_BH: 0
1st_Cb_BL: 0
1st_Cr_RH: 0
1st_Cr_RL: 0
2nd_R_L: 134
2nd_G_L: 134
2nd_B_L: 134
2nd_R_H: 49
2nd_G_H: 49
2nd_B_H: 49
White Balance
R-Offset: 128
G-Offset: 128
B-Offset: 128
R-Gain: 136
G-Gain: 128
B-Gain: 143
WB_W2_R_Offset: 128 (not modifiable)
WB_W2_B_Offset: 128 (not modifiable)
WB_W2_R_Gain: 163 (not modifiable)
WB_W2_B_Gain: 86 (not modifiable)
WB_N_R_Offset: 128 (not modifiable)
WB_N_B_Offset: 128 (not modifiable)
WB_N_R_Gain: 158 (not modifiable)
WB_N_B_Gain: 124 (not modifiable)
MGA
MGA On/Off: OFF
R1_Gain: 514 (not modifiable, MGA is off)
G1_Gain: 522 (not modifiable, MGA is off)
B1_Gain: 524 (not modifiable, MGA is off)
R2_Gain: 512 (not modifiable, MGA is off)
G2_Gain: 520 (not modifiable, MGA is off)
B2_Gain: 522 (not modifiable, MGA is off)
R3_Gain: 508 (not modifiable, MGA is off)
G3_Gain: 514 (not modifiable, MGA is off)
B3_Gain: 516 (not modifiable, MGA is off)
R4_Gain: 506 (not modifiable, MGA is off)
G4_Gain: 508 (not modifiable, MGA is off)
B4_Gain: 512 (not modifiable, MGA is off)
R5_Gain: 504 (not modifiable, MGA is off)
G5_Gain: 508 (not modifiable, MGA is off)
B5_Gain: 512 (not modifiable, MGA is off)
R6_Gain: 504 (not modifiable, MGA is off)
G6_Gain: 510 (not modifiable, MGA is off)
B6_Gain: 514 (not modifiable, MGA is off)
R7_Gain: 504 (not modifiable, MGA is off)
G7_Gain: 510 (not modifiable, MGA is off)
B7_Gain: 514 (not modifiable, MGA is off)
R8_Gain: 506 (not modifiable, MGA is off)
G8_Gain: 512 (not modifiable, MGA is off)
B8_Gain: 512 (not modifiable, MGA is off)
R9_Gain: 510 (not modifiable, MGA is off)
G9_Gain: 512 (not modifiable, MGA is off)
B9_Gain: 512 (not modifiable, MGA is off)
R10_Gain: 512 (not modifiable, MGA is off)
G10_Gain: 512 (not modifiable, MGA is off)
B10_Gain: 512 (not modifiable, MGA is off)
Advanced: nothing?
