Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Seagate ST1000LM024 - prośba o analizę SMART

frenolest 22 Kwi 2017 03:28 399 2
  • #1 22 Kwi 2017 03:28
    frenolest
    Poziom 2  

    Dzień dobry, jak w temacie proszę bardziej doświadczonych kolegów o informację czy z dyskiem da się jeszcze coś zrobić. Z góry dziękuję.

    smartctl 6.3 2014-07-26 r3976 [i686-linux-3.15.9-pmagic] (local build)
    Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Momentus SpinPoint M8 (AF)
    Device Model: ST1000LM024 HN-M101MBB
    Serial Number: S2SMJ9GD901341
    LU WWN Device Id: 5 0004cf 20b1e3bb4
    Firmware Version: 2AR20002
    User Capacity: 1,000,204,886,016 bytes [1.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Form Factor: 2.5 inches
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS T13/1699-D revision 6
    SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
    Local Time is: Thu Apr 20 16:26:56 2017 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 114) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: (12960) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 216) minutes.
    SCT capabilities: (0x003f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1309
    2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0




    3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3064
    4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7874
    5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
    8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18263
    10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 283
    12 Power_Cycle_Count 0x0032 093 093 000 Old_age Always - 7971
    191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 521
    192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
    194 Temperature_Celsius 0x0002 060 053 000 Old_age Always - 40 (Min/Max 13/47)
    195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
    196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 3
    198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1683
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 283
    225 Load_Cycle_Count 0x0032 062 062 000 Old_age Always - 383867

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 20% 18263 1865443384
    # 2 Vendor (0x50) Completed without error 00% 17382 -
    # 3 Short offline Completed without error 00% 17382 -
    # 4 Vendor (0x50) Completed without error 00% 16910 -
    # 5 Short offline Completed without error 00% 16910 -
    # 6 Vendor (0x50) Completed without error 00% 16350 -
    # 7 Short offline Completed without error 00% 16350 -
    # 8 Vendor (0x50) Completed without error 00% 15762 -
    # 9 Short offline Completed without error 00% 15762 -
    #10 Vendor (0x50) Completed without error 00% 15152 -
    #11 Short offline Completed without error 00% 15152 -
    #12 Vendor (0x50) Completed without error 00% 14543 -
    #13 Short offline Completed without error 00% 14543 -
    #14 Vendor (0x50) Completed without error 00% 11129 -
    #15 Short offline Completed without error 00% 11129 -
    #16 Vendor (0x50) Completed without error 00% 8059 -
    #17 Short offline Completed without error 00% 8059 -
    #18 Vendor (0x50) Completed without error 00% 7650 -
    #19 Short offline Completed without error 00% 7650 -
    #20 Vendor (0x50) Completed without error 00% 7650 -
    #21 Short offline Completed without error 00% 7650 -

    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Completed_read_failure [20% left] (0-65535)
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    0 2
  • Pomocny post
    #2 22 Kwi 2017 08:15
    kokapetyl
    Poziom 43  

    Dysk posiada niestabilne sektory (atrybut 197).
    Procedura naprawcza dysku powinna pomóc.
    https://www.elektroda.pl/rtvforum/topic1550200.html
    Ponad to dysk zaliczył dużą ilość niedozwolonych wstrząsów (atrybut 191), trzeba bardziej uważać.

    0
  • #3 22 Kwi 2017 14:04
    frenolest
    Poziom 2  

    Tak przypuszczałem, dzięki za pomoc.

    0
  Szukaj w 5mln produktów