Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Gorenje EI57337AX - Płyta indukcyjna - błąd E4

c4l0g3r0 08 Sie 2017 21:50 855 2
  • #1 08 Sie 2017 21:50
    c4l0g3r0
    Poziom 8  

    Posiadam kuchenkę Gorenje EI57337AX, chcąc skorzystać z płyty indukcyjnej z lewego palnika dolnego albo górnego wyświetla się i mruga na zmianę "E" i "4". Dwa prawe palniki działają bez problemu. Co oznacza ten błąd? I gdzie szukać przyczyny?

    0 2
  • Pomocny post
    #2 14 Sie 2017 19:57
    mrhari
    Moderator AGD i automatyka

    E4 oznacza brak konfiguracji dla tego pola lub co bardziej prawdopodobne, uszkodzoną elektronikę.

    Spoiler:


    In case of error E4 (unconfigured induction modul) or error EC (configuration failure) it is necessary to try to fix the problem with making the configuration anew.
    Configuration is possible to make in service menu but first old configuration must be erased.

    How to enter service menu:

    It is possible to enter service menu within 2 minutes after appliance is connected to the electric power, procedure itself must be carried out within 5 seconds.

    Procedure:

    Rotate the knob for the rear right cooking zone to the left and hold it in this position (on the display is written A)

    Rotate the knob for the front right cooking zone to the position 9 and further to P (P is written on the display), hold it in this position until sound signal is heard, then release the button to the position 9.

    Rotate the knob again to the position P, wait for sound signal and release the knob to 9. Rotate the knob for the third time to the position P, wait for sound signal, hold the knob on the position P and then release the knob for the rear right cooking zone (it goes to the zero position).

    On the display is visible C for not configured cooking zones and "-" for configured. Now release the knob for the front cooking zone, it goes to 9.

    Erasing of the old configuration:

    Knob for the rear right cooking zone rotate to the position 9, erasing process will start (E on all cooking zones will start to flash). After process is finished E will be displayed.

    Configuration:

    Rotate the knob for the rear cooking zone to the zero position. On the display will start flashing C for the left front cooking zone. Put the pot on the cooking zone. Then will start flashing C for the left rear cooking zone, put the pot on that cooking zone and so on. After all cooking zones are configured, procedure is automatically ended.

    Configuration procedure can be aborted any time by rotating the knob for the rear right cooking zone to the left.

    3
  • #3 25 Sty 2018 08:37
    sl25e
    Poziom 11  

    Czy poradziłeś sobie z tym problemem? Mam podobny.

    0