logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Kyocera FS-4200DN błąd F000 - czy aktualizacja firmware rozwiąże problem?

chrys7 25 Paź 2017 14:14 5040 2
REKLAMA
  • #1 16778448
    chrys7
    Poziom 2  
    Witam,
    maszyna po uruchomieniu prezentuje komunikat (w załączniku):

    Machine failure.
    Call service.

    F000

    Czy zmiana firmware może pomóc na ten konkretny przypadek?
    Proszę o informację czy któryś z kolegów ma dostęp do firmware?

    Z góry dziękuję za pomoc.

    Pozdrawiam
  • REKLAMA
  • #2 16779645
    kaszus
    Poziom 13  
    Kyocera FS-4200DN błąd F000 - czy aktualizacja firmware rozwiąże problem?


    Raczej bez wymiany płyty się nie obejdzie ale możesz spróbować wg dokumentacji:

    1) Check connection of the harness (Panel to Main board), (Main board to HDD) and
    connectors and check function.
    2) Check contact of the DDR memory by detaching and reattaching. and check function.
    replace it if available and check function.
    3) Format the HDD and check function. (U024 FULL formatting) (*1)
    4) Execute the U021 Memory initializing to initialize the controller backup memory and
    check function.
    5) Replace the main board and check function.
    6) Replace the panelmain board and check function.
    7) Retrieve the USBLOG and contact the Service Administrative Division. (*1)
    (*1) For the HDD standard model only
  • #3 16781675
    suchy18
    Poziom 20  
    Trzeba wgrać firmware w trybie emergency. Wszystko masz na PW
REKLAMA