Elektroda.pl
Elektroda.pl
X
Relpol
Proszę, dodaj wyjątek www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

Router EASYBOX 802 ogranicza predkosc z 92mb/s do 20mb/s

dziki87 16 Kwi 2018 17:04 480 12
  • #1 16 Kwi 2018 17:04
    dziki87
    Poziom 8  

    Witam serdecznie. Jakiś czas temu zakupiłem zestaw router Vodafone Easybox 802 z modemem ZTE MF823.Jeden z problemow polega na tym ze wifi chodzi przez ok 10min i rozłącza się i nie działa przez jakiś czas i tak na zmianę a prędkość pobierania na speedtest jest do 16Mb/s.
    Kolejnym problemem jest ograniczona prędkość wyjściowa routera LAN do 20Mb/s. Żeby wifi działało musiałem podłączyć dodatkowy router który pracuje stabilnie i wifi wtedy wysyła z prędkością do 20Mb/s tyle ile puszcza po LAN EASYBOX. Na Speedtest modem ZTE MF823 podłączony bezpośrednio pod usb w PC osiąga prędkość do 92Mb/s. Reset routera nic nie daje a sam router jest ustawiony pod modem usb.

    0 12
  • Relpol
  • #2 16 Kwi 2018 17:53
    makosuu
    Specjalista Sieci, Internet

    Zakładam że na routerze OpenWrt i modem obsługujesz przez ppp które ogranicza prędkość do 20-30Mb/s? I czemu kupiłeś akurat ten router?

    0
  • #3 16 Kwi 2018 20:32
    dziki87
    Poziom 8  

    Jakoś tak się złożyło że kopiłem ten zestaw. Jeśli dobrze cie zrozumiałem to w modemie ma ustawiony protokół "klient DHCP" a w LAN "Stały adres"

    0
  • Relpol
  • #4 16 Kwi 2018 20:33
    makosuu
    Specjalista Sieci, Internet

    Ten modem to HiLink?

    0
  • #5 16 Kwi 2018 23:06
    dziki87
    Poziom 8  

    Tak ten ZTE to HiLink. Zapomniałem wspomnieć że ten router jest z softem od jucom24. Pisałem do nich ale tam nie ma z kim rozmawiać. Poniżej przykład ich softu.
    https://youtu.be/h43A-0k2ZKM

    0
  • #6 16 Kwi 2018 23:54
    makosuu
    Specjalista Sieci, Internet

    Przecież to nie jest żaden ich soft tylko zwykłe OpenWrt Chaos Calmer z LuCI, tylko na swoje przerobili nieco, dodając logo i standardowe hasło. Spróbuj to ustawić od nowa, powinno być szybciej.

    0
  • #7 17 Kwi 2018 00:07
    jurek.adam
    Poziom 43  

    Jak OpenWRT to skopiuj zawartość logów, STAN -> LOG SYSTEMOWY oraz LOG JĄDRA.

    Dodano po 7 [minuty]:

    Bez tego mogę napisać, że przy MF823 może się restartować ze względu na zbyt słabą wydajność prądową portów usb w Easybox. Trzeba było kupić najnowszy E3372, mniej prądożerny i na Easyboxach daje radę.

    0
  • #8 17 Kwi 2018 08:40
    dziki87
    Poziom 8  

    Code:
    Log systemowy
    
    Tue Nov 29 20:28:32 2016 user.err kernel: [   16.968000] block: unable to load configuration (fstab: Entry not found)
    Tue Nov 29 20:28:32 2016 user.info kernel: [   16.976000] block: attempting to load /etc/config/fstab
    Tue Nov 29 20:28:32 2016 user.err kernel: [   16.980000] block: unable to load configuration (fstab: Entry not found)
    Tue Nov 29 20:28:32 2016 user.err kernel: [   16.988000] block: no usable configuration
    Tue Nov 29 20:28:32 2016 user.info kernel: [   16.996000] mount_root: overlay filesystem has not been fully initialized yet
    Tue Nov 29 20:28:32 2016 user.info kernel: [   17.004000] mount_root: switching to jffs2 overlay
    Tue Nov 29 20:28:32 2016 user.info kernel: [   17.072000] procd: - early -
    Tue Nov 29 20:28:32 2016 user.info kernel: [   17.072000] procd: - watchdog -
    Tue Nov 29 20:28:32 2016 user.info kernel: [   18.216000] procd: - ubus -
    Tue Nov 29 20:28:32 2016 user.info kernel: [   19.232000] procd: - init -
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.384000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.384000]
    Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.428000] NET: Registered protocol family 8
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.432000] NET: Registered protocol family 20
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.460000] tun: Universal TUN/TAP device driver, 1.6
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.464000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.480000] gre: GRE over IPv4 demultiplexor driver
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.488000] ip_gre: GRE over IPv4 tunneling driver
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.508000] IFX MEI Version 5.00.00
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   28.532000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.556000] fuse init (API version 7.23)




    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.584000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.592000] Backport generated by backports.git backports-20151218-0-g2f58d9d
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   28.628000] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.636000] request_timer(3, 0x000001AE, 1)...successful!
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   28.640000] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.660000] ATM1.0.26    ATM (A1) firmware version 0.17
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   28.664000] ifxmips_atm: ATM init succeed
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   28.684000] nf_conntrack version 0.5.0 (942 buckets, 3768 max)
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.232000] usbcore: registered new interface driver usblp
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.324000] xt_time: kernel timezone is -0000
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.332000] usbcore: registered new interface driver cdc_ether
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.456000] ip_tables: (C) 2000-2006 Netfilter Core Team
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.720000] PPP generic driver version 2.4.2
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.728000] PPP MPPE Compression module registered
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.740000] NET: Registered protocol family 24
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.748000] PPTP driver version 0.8.5
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.772000] rndis_host 1-1.1:1.0 usb0: register 'rndis_host' at usb-ifxusb_hcd-1.1, RNDIS device, 36:4b:50:b7:ef:2d
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.780000] usbcore: registered new interface driver rndis_host
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   29.896000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
    Tue Nov 29 20:28:32 2016 kern.err kernel: [   29.900000] rt2800pci 0000:00:0e.0: failed to load eeprom property
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   29.904000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'.
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   29.916000] rt2800pci 0000:00:0e.0: Direct firmware load for RT2860.eeprom failed with error -2
    Tue Nov 29 20:28:32 2016 kern.warn kernel: [   29.924000] rt2800pci 0000:00:0e.0: Falling back to user helper
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   31.984000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
    Tue Nov 29 20:28:32 2016 kern.info kernel: [   31.988000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
    Tue Nov 29 20:28:32 2016 kern.debug kernel: [   31.996000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    Tue Nov 29 20:28:38 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
    Tue Nov 29 20:28:38 2016 daemon.err block: /dev/mtdblock5 is already mounted
    Tue Nov 29 20:28:41 2016 lpr.err p9100d[1487]: socket: Address family not supported by protocol
    Tue Nov 29 20:28:45 2016 user.emerg syslog: Generating RSA private key, 1024 bit long modulus
    Tue Nov 29 20:28:48 2016 user.emerg syslog: Generating selfsigned certificate with subject 'C=ZZ,ST=Somewhere,L=Uknown,CN=OpenWrt,' and validity 20161129192845-20181129192845
    Tue Nov 29 20:28:50 2016 daemon.err uhttpd[1530]: socket(): Address family not supported by protocol
    Tue Nov 29 20:28:50 2016 daemon.err uhttpd[1530]: socket(): Address family not supported by protocol
    Tue Nov 29 20:28:52 2016 kern.info kernel: [   64.136000] device eth0.1 entered promiscuous mode
    Tue Nov 29 20:28:52 2016 kern.info kernel: [   64.140000] device eth0 entered promiscuous mode
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'lan' is enabled
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'lan' is setting up now
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'lan' is now up
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'loopback' is enabled
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'loopback' is setting up now
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'loopback' is now up
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'modem' is enabled
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'wan' is enabled
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Network device 'lo' link is up
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Network device 'usb0' link is up
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'modem' has link connectivity
    Tue Nov 29 20:28:52 2016 daemon.notice netifd: Interface 'modem' is setting up now
    Tue Nov 29 20:28:54 2016 kern.info kernel: [   65.760000] br-lan: port 1(eth0.1) entered forwarding state
    Tue Nov 29 20:28:54 2016 kern.info kernel: [   65.764000] br-lan: port 1(eth0.1) entered forwarding state
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: Network device 'eth0' link is up
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: VLAN 'eth0.2' link is up
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: Interface 'wan' has link connectivity
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: Interface 'wan' is setting up now
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: Bridge 'br-lan' link is up
    Tue Nov 29 20:28:54 2016 daemon.notice netifd: Interface 'lan' has link connectivity
    Tue Nov 29 20:28:55 2016 daemon.notice netifd: modem (1617): udhcpc (v1.23.2) started
    Tue Nov 29 20:28:56 2016 kern.info kernel: [   67.768000] br-lan: port 1(eth0.1) entered forwarding state
    Tue Nov 29 20:28:56 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
    Tue Nov 29 20:28:57 2016 daemon.notice netifd: modem (1617): Sending discover...
    Tue Nov 29 20:28:57 2016 daemon.notice netifd: modem (1617): Sending select for 192.168.0.182...
    Tue Nov 29 20:28:57 2016 daemon.notice netifd: modem (1617): Lease of 192.168.0.182 obtained, lease time 86400
    Tue Nov 29 20:28:57 2016 daemon.notice netifd: wan (1678): udhcpc (v1.23.2) started
    Tue Nov 29 20:29:00 2016 daemon.notice netifd: radio0 (1569): command failed: Operation not supported (-122)
    Tue Nov 29 20:29:01 2016 daemon.notice netifd: wan (1678): Sending discover...
    Tue Nov 29 20:29:01 2016 daemon.notice netifd: Interface 'modem' is now up
    Tue Nov 29 20:29:04 2016 daemon.notice netifd: wan (1678): Sending discover...
    Tue Nov 29 20:29:06 2016 daemon.notice netifd: radio0 (1569): Configuration file: /var/run/hostapd-phy0.conf
    Tue Nov 29 20:29:06 2016 kern.info kernel: [   78.012000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
    Tue Nov 29 20:29:06 2016 kern.info kernel: [   78.080000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
    Tue Nov 29 20:29:06 2016 kern.info kernel: [   78.256000] device wlan0 entered promiscuous mode
    Tue Nov 29 20:29:06 2016 daemon.notice netifd: radio0 (1569): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
    Tue Nov 29 20:29:06 2016 daemon.notice netifd: radio0 (1569): Using interface wlan0 with hwaddr 00:0c:43:28:60:00 and ssid "jucom24.pl"
    Tue Nov 29 20:29:07 2016 daemon.notice netifd: wan (1678): Sending discover...
    Tue Nov 29 20:29:11 2016 kern.info kernel: [   83.304000] br-lan: port 2(wlan0) entered forwarding state
    Tue Nov 29 20:29:11 2016 kern.info kernel: [   83.308000] br-lan: port 2(wlan0) entered forwarding state
    Tue Nov 29 20:29:11 2016 daemon.notice netifd: radio0 (1569): wlan0: interface state COUNTRY_UPDATE->ENABLED
    Tue Nov 29 20:29:11 2016 daemon.notice netifd: radio0 (1569): wlan0: AP-ENABLED
    Tue Nov 29 20:29:12 2016 user.emerg syslog: setting up led wifi
    Tue Nov 29 20:29:12 2016 user.emerg syslog: setting up led usb
    Tue Nov 29 20:29:12 2016 user.emerg syslog: setting up led internet
    Tue Nov 29 20:29:12 2016 user.emerg syslog: setting up led fxo
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led fxs1
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led fxs2
    Tue Nov 29 20:29:13 2016 daemon.notice netifd: Network device 'wlan0' link is up
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led message
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led power1
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led voice1
    Tue Nov 29 20:29:13 2016 user.emerg syslog: setting up led voice2
    Tue Nov 29 20:29:13 2016 kern.info kernel: [   85.312000] br-lan: port 2(wlan0) entered forwarding state
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: started, version 2.73 cachesize 150
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: DNS service limited to local subnets
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq-dhcp[1902]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: using local addresses only for domain lan
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: reading /tmp/resolv.conf.auto
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: using local addresses only for domain lan
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: using nameserver 192.168.0.1#53
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: read /etc/hosts - 1 addresses
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq[1902]: read /tmp/hosts/dhcp - 1 addresses
    Tue Nov 29 20:29:15 2016 daemon.info dnsmasq-dhcp[1902]: read /etc/ethers - 0 addresses
    Tue Nov 29 20:29:17 2016 daemon.info procd: - init complete -
    Tue Nov 29 20:29:19 2016 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Tue Nov 29 20:29:19 2016 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Mon Apr 16 20:22:45 2018 user.notice firewall: Reloading firewall due to ifup of modem (usb0)
    Mon Apr 16 20:22:57 2018 user.notice adblock[2084] info : adblock service started due to 'ifup' of 'modem' interface
    Mon Apr 16 20:22:59 2018 user.notice adblock[2190] warn : adblock is currently disabled, please set adb_enabled to '1' to use this service
    Mon Apr 16 20:23:16 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: authenticated
    Mon Apr 16 20:23:16 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: associated (aid 1)
    Mon Apr 16 20:23:16 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b WPA: pairwise key handshake completed (RSN)
    Mon Apr 16 20:23:16 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Mon Apr 16 20:23:16 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico
    Mon Apr 16 20:23:16 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Mon Apr 16 20:23:16 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Mon Apr 16 20:23:19 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Mon Apr 16 20:23:19 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico
    Mon Apr 16 20:24:02 2018 authpriv.info dropbear[2391]: Not backgrounding
    Mon Apr 16 20:24:39 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Mon Apr 16 20:24:39 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Mon Apr 16 20:24:39 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Mon Apr 16 20:24:39 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico
    Mon Apr 16 20:26:00 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Mon Apr 16 20:26:00 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico
    Mon Apr 16 20:26:11 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: disassociated
    Mon Apr 16 20:26:12 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
    Mon Apr 16 20:26:14 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Mon Apr 16 20:26:14 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Mon Apr 16 20:26:17 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Mon Apr 16 20:26:17 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Mon Apr 16 20:27:40 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44
    Mon Apr 16 20:27:40 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.222 c8:5b:76:ba:e8:44 Rico
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 01:49:04 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 07:49:34 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.173 e4:be:ed:13:0b:53
    Tue Apr 17 08:22:23 2018 daemon.notice netifd: modem (1617): Sending renew...
    Tue Apr 17 08:22:23 2018 daemon.notice netifd: modem (1617): Lease of 192.168.0.182 obtained, lease time 86400
    Tue Apr 17 08:27:44 2018 daemon.info hostapd: wlan0: STA 38:a4:ed:1a:6d:1e IEEE 802.11: authenticated
    Tue Apr 17 08:27:44 2018 daemon.info hostapd: wlan0: STA 38:a4:ed:1a:6d:1e IEEE 802.11: associated (aid 1)
    Tue Apr 17 08:27:44 2018 daemon.info hostapd: wlan0: STA 38:a4:ed:1a:6d:1e WPA: pairwise key handshake completed (RSN)
    Tue Apr 17 08:27:53 2018 daemon.info dnsmasq-dhcp[1902]: DHCPDISCOVER(br-lan) 38:a4:ed:1a:6d:1e
    Tue Apr 17 08:27:53 2018 daemon.info dnsmasq-dhcp[1902]: DHCPOFFER(br-lan) 192.168.2.182 38:a4:ed:1a:6d:1e
    Tue Apr 17 08:27:53 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.182 38:a4:ed:1a:6d:1e
    Tue Apr 17 08:27:53 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.182 38:a4:ed:1a:6d:1e MI5-DaniMi5
    Tue Apr 17 08:32:38 2018 daemon.info hostapd: wlan0: STA 38:a4:ed:1a:6d:1e WPA: group key handshake completed (RSN)
    Tue Apr 17 08:34:50 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: authenticated
    Tue Apr 17 08:34:50 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b IEEE 802.11: associated (aid 1)
    Tue Apr 17 08:34:50 2018 daemon.info hostapd: wlan0: STA c8:3d:d4:70:85:0b WPA: pairwise key handshake completed (RSN)
    Tue Apr 17 08:34:56 2018 daemon.info dnsmasq-dhcp[1902]: DHCPDISCOVER(br-lan) c8:3d:d4:70:85:0b
    Tue Apr 17 08:34:56 2018 daemon.info dnsmasq-dhcp[1902]: DHCPOFFER(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Tue Apr 17 08:34:56 2018 daemon.info dnsmasq-dhcp[1902]: DHCPREQUEST(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Tue Apr 17 08:34:56 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico
    Tue Apr 17 08:34:59 2018 daemon.info dnsmasq-dhcp[1902]: DHCPINFORM(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b
    Tue Apr 17 08:34:59 2018 daemon.info dnsmasq-dhcp[1902]: DHCPACK(br-lan) 192.168.2.139 c8:3d:d4:70:85:0b Rico



    Code:
    Log jądra
    
    [    0.000000] Linux version 3.18.44 (buildbot@node476.intranet) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49261) ) #22 Tue Nov 29 20:28:31 CET 2016
    [    0.000000] SoC: Danube rev 1.5
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
    [    0.000000] MIPS: machine is ARV752DPW - EasyBOX 802
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 04000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
    [    0.000000] On node 0 totalpages: 16384
    [    0.000000] free_area_init_node: node 0, pgdat 804282f0, node_mem_map 81007020
    [    0.000000]   Normal zone: 128 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
    [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
    [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [    0.000000] pcpu-alloc: [0] 0
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
    [    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
    [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
    [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Writing ErrCtl register=000108a7
    [    0.000000] Readback ErrCtl register=000108a7
    [    0.000000] Memory: 60144K/65536K available (3444K kernel code, 148K rwdata, 768K rodata, 164K init, 194K bss, 5392K reserved)
    [    0.000000] NR_IRQS:256
    [    0.000000] CPU Clock: 333MHz
    [    0.040000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
    [    0.040000] pid_max: default: 32768 minimum: 301
    [    0.044000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.056000] pinctrl core: initialized pinctrl subsystem
    [    0.064000] NET: Registered protocol family 16
    [    0.076000] pinctrl-xway 1e100b10.pinmux: Init done
    [    0.080000] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
    [    0.088000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
    [    0.092000]  MEM 0x0000000018000000..0x0000000019ffffff
    [    0.096000]   IO 0x000000001ae00000..0x000000001affffff
    [    0.116000] usbcore: registered new interface driver usbfs
    [    0.120000] usbcore: registered new interface driver hub
    [    0.124000] usbcore: registered new device driver usb
    [    0.128000] PCI host bridge to bus 0000:00
    [    0.132000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
    [    0.136000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
    [    0.140000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [    0.144000] pci 0000:00:0e.0: [1814:0601] type 00 class 0x028000
    [    0.144000] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
    [    0.144000] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
    [    0.144000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
    [    0.144000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
    [    0.148000] Switched to clocksource MIPS
    [    0.152000] NET: Registered protocol family 2
    [    0.160000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.168000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.172000] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.180000] TCP: reno registered
    [    0.184000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.188000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.196000] NET: Registered protocol family 1
    [    0.200000] PCI: CLS 0 bytes, default 32
    [    0.200000] gptu: totally 6 16-bit timers/counters
    [    0.208000] gptu: misc_register on minor 63
    [    0.212000] gptu: succeeded to request irq 126
    [    0.216000] gptu: succeeded to request irq 127
    [    0.220000] gptu: succeeded to request irq 128
    [    0.224000] gptu: succeeded to request irq 129
    [    0.228000] gptu: succeeded to request irq 130
    [    0.232000] gptu: succeeded to request irq 131
    [    0.244000] lantiq,vmmc 1f103000.vmmc: requested GPIO 465
    [    0.248000] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
    [    0.256000] ralink,eeprom ralink_eep: using RT2860.eeprom as eeprom
    [    0.264000] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.336000] msgmni has been set to 117
    [    0.340000] io scheduler noop registered
    [    0.344000] io scheduler deadline registered (default)
    [    0.352000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
    [    0.360000] console [ttyLTQ0] enabled
    [    0.368000] bootconsole [early0] disabled
    [    0.376000] lantiq nor flash device: 00800000 at 10000000
    [    0.380000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
    [    0.388000] Amd/Fujitsu Extended Query Table at 0x0040
    [    0.396000]   Amd/Fujitsu Extended Query version 1.1.
    [    0.400000] number of CFI chips: 1
    [    0.404000] 4 ofpart partitions found on MTD device ltq_nor
    [    0.408000] Creating 4 MTD partitions on "ltq_nor":
    [    0.412000] 0x000000000000-0x000000010000 : "uboot"
    [    0.420000] 0x000000010000-0x000000020000 : "uboot_env"
    [    0.424000] 0x000000020000-0x0000007f0000 : "firmware"
    [    0.472000] 2 uimage-fw partitions found on MTD device firmware
    [    0.476000] 0x000000020000-0x000000196929 : "kernel"
    [    0.480000] 0x000000196929-0x0000007f0000 : "rootfs"
    [    0.488000] mtd: device 4 (rootfs) set to be root filesystem
    [    0.492000] 1 squashfs-split partitions found on MTD device rootfs
    [    0.496000] 0x000000760000-0x0000007f0000 : "rootfs_data"
    [    0.568000] 0x0000007f0000-0x000000800000 : "board_config"
    [    0.612000] libphy: ltq_mii: probed
    [    0.708000] Registering RTL8306SDM switch with Chip ID: 0x5988, version: 0x0000
    [    0.712000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=1e180000.etop-ff:00, irq=-1)
    [    0.724000] wdt 1f8803f0.watchdog: Init done
    [    0.732000] TCP: cubic registered
    [    0.732000] NET: Registered protocol family 17
    [    0.736000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    0.748000] Bridge firewalling registered
    [    0.752000] 8021q: 802.1Q VLAN Support v1.8
    [    0.764000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
    [    0.788000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
    [    0.792000] Freeing unused kernel memory: 164K (80447000 - 80470000)
    [    3.804000] init: Console is alive
    [    3.808000] init: - watchdog -
    [    8.364000] exFAT: Version 1.2.9
    [    8.424000] SCSI subsystem initialized
    [    8.436000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    8.444000] ehci-platform: EHCI generic platform driver
    [    8.460000] IFXUSB: ifxusb_hcd: version 3.2 B110801
    [    8.968000] IFXUSB: USB core #0 soft-reset
    [    9.172000] IFXUSB: USB core #0 soft-reset
    [    9.172000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
    [    9.180000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
    [    9.184000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
    [    9.192000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
    [    9.196000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
    [    9.204000] IFXUSB: Init: Power Port (0)
    [    9.212000] hub 1-0:1.0: USB hub found
    [    9.212000] hub 1-0:1.0: 1 port detected
    [    9.220000] ifxusb_hcd ifxusb_hcd: requested GPIO 464
    [    9.228000] usbcore: registered new interface driver usb-storage
    [    9.592000] usb 1-1: new high-speed USB device number 2 using ifxusb_hcd
    [    9.784000] hub 1-1:1.0: USB hub found
    [    9.788000] hub 1-1:1.0: 4 ports detected
    [   10.012000] random: nonblocking pool is initialized
    [   10.068000] usb 1-1.1: new high-speed USB device number 3 using ifxusb_hcd
    [   10.208000] init: - preinit -
    [   10.532000] usb-storage 1-1.1:1.2: USB Mass Storage device detected
    [   10.536000] scsi host0: usb-storage 1-1.1:1.2
    [   11.540000] scsi 0:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
    [   11.552000] scsi 0:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
    [   11.568000] sd 0:0:0:1: [sda] Attached SCSI removable disk
    [   14.780000] mount_root: loading kmods from internal overlay
    [   15.948000] jffs2: notice: (344) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [   15.964000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [   15.968000] block: unable to load configuration (fstab: Entry not found)
    [   15.976000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
    [   15.980000] block: unable to load configuration (fstab: Entry not found)
    [   15.988000] block: attempting to load /etc/config/fstab
    [   15.996000] block: unable to load configuration (fstab: Entry not found)
    [   16.004000] block: no usable configuration
    [   16.264000] jffs2: notice: (341) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [   16.948000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [   16.956000] block: unable to load configuration (fstab: Entry not found)
    [   16.964000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
    [   16.968000] block: unable to load configuration (fstab: Entry not found)
    [   16.976000] block: attempting to load /etc/config/fstab
    [   16.980000] block: unable to load configuration (fstab: Entry not found)
    [   16.988000] block: no usable configuration
    [   16.996000] mount_root: overlay filesystem has not been fully initialized yet
    [   17.004000] mount_root: switching to jffs2 overlay
    [   17.072000] procd: - early -
    [   17.072000] procd: - watchdog -
    [   18.216000] procd: - ubus -
    [   19.232000] procd: - init -
    [   28.384000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
    [   28.384000]
    Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
    [   28.428000] NET: Registered protocol family 8
    [   28.432000] NET: Registered protocol family 20
    [   28.460000] tun: Universal TUN/TAP device driver, 1.6
    [   28.464000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [   28.480000] gre: GRE over IPv4 demultiplexor driver
    [   28.488000] ip_gre: GRE over IPv4 tunneling driver
    [   28.508000] IFX MEI Version 5.00.00
    [   28.532000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
    [   28.556000] fuse init (API version 7.23)
    [   28.584000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
    [   28.592000] Backport generated by backports.git backports-20151218-0-g2f58d9d
    [   28.628000] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
    [   28.636000] request_timer(3, 0x000001AE, 1)...successful!
    [   28.640000] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
    [   28.660000] ATM1.0.26    ATM (A1) firmware version 0.17
    [   28.664000] ifxmips_atm: ATM init succeed
    [   28.684000] nf_conntrack version 0.5.0 (942 buckets, 3768 max)
    [   29.232000] usbcore: registered new interface driver usblp
    [   29.324000] xt_time: kernel timezone is -0000
    [   29.332000] usbcore: registered new interface driver cdc_ether
    [   29.456000] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   29.720000] PPP generic driver version 2.4.2
    [   29.728000] PPP MPPE Compression module registered
    [   29.740000] NET: Registered protocol family 24
    [   29.748000] PPTP driver version 0.8.5
    [   29.772000] rndis_host 1-1.1:1.0 usb0: register 'rndis_host' at usb-ifxusb_hcd-1.1, RNDIS device, 36:4b:50:b7:ef:2d
    [   29.780000] usbcore: registered new interface driver rndis_host
    [   29.896000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
    [   29.900000] rt2800pci 0000:00:0e.0: failed to load eeprom property
    [   29.904000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'.
    [   29.916000] rt2800pci 0000:00:0e.0: Direct firmware load for RT2860.eeprom failed with error -2
    [   29.924000] rt2800pci 0000:00:0e.0: Falling back to user helper
    [   31.984000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
    [   31.988000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
    [   31.996000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   64.136000] device eth0.1 entered promiscuous mode
    [   64.140000] device eth0 entered promiscuous mode
    [   65.760000] br-lan: port 1(eth0.1) entered forwarding state
    [   65.764000] br-lan: port 1(eth0.1) entered forwarding state
    [   67.768000] br-lan: port 1(eth0.1) entered forwarding state
    [   78.012000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
    [   78.080000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
    [   78.256000] device wlan0 entered promiscuous mode
    [   83.304000] br-lan: port 2(wlan0) entered forwarding state
    [   83.308000] br-lan: port 2(wlan0) entered forwarding state
    [   85.312000] br-lan: port 2(wlan0) entered forwarding state

    0
  • #9 17 Kwi 2018 13:14
    jurek.adam
    Poziom 43  

    Nie ma w tych logach nic podejrzanego, odczekaj, aż pojawią się problemy, o których pisałeś i dopiero po tym wklej logi. Modem włóż do górnego portu usb, bo ma on najstabilniejszą wydajność prądową. Podejrzyj na stronie modemu jaki masz sygnał, bo może trzeba zmienić miejsce ustawienia routera. Włącz wifi. Zaloguj się przez program PuTTY (ssh na 192.168.2.1 jako root, domyślne hasło 123456) i pokaż co masz po wpisaniu poleceń:

    Code:
    cat /etc/config/fstab
    
    cat /etc/config/network
    cat /etc/config/wireless
    mount
    df
    ps
    cat /sys/kernel/debug/usb/devices
    dmesg


    Tylko wyniki wrzuć w znaczniki code jak to powyżej zrobiłem, żeby dało się to normalnie przeglądać.

    1
  • #10 18 Kwi 2018 10:44
    dziki87
    Poziom 8  

    Modem umieszczałem tylko w górnym gnieździe USB i mam malą przedłużkę USB bo pod modem mam podpiętą antenę zewnętrzną dlatego sygnał z modemu podpiętego pod PC jak i podpiętego pod router są jednakowe. Bez przedłużki (30cm) i bez anteny problemy są takie same. Myślę ze z WIFI nic nie wyszło bo z niego nie korzystam na EasyBoxie i na razie możemy sobie odpuścić problem WIFI bo jak jest uruchomione to mam mniejszy zasięg jak na dodatkowym routerze. Głównie to ograniczenia na porcie LAN mnie interesują. Facet z JUCOM24 powiedział że to możne być wina sterowników i na to nic sie nie poradzi;/

    0
  • #11 18 Kwi 2018 11:14
    jurek.adam
    Poziom 43  

    Sterowniki można doinstalować, ale nie wiadomo jakie, bo nie zamieściłeś informacji, o których pisałem. Jeszcze dodatkowo będzie potrzebny wynik z lsmod.

    1
  • #12 18 Kwi 2018 11:49
    dziki87
    Poziom 8  

    Code:
    root@EasyBOX:~# cat /etc/config/fstab
    
    config 'global'
            option  anon_swap       '0'
            option  anon_mount      '0'
            option  auto_swap       '1'
            option  auto_mount      '1'
            option  delay_root      '5'
            option  check_fs        '0'


    root@EasyBOX:~# cat /etc/config/network

    config interface 'loopback'
            option ifname 'lo'
            option proto 'static'
            option ipaddr '127.0.0.1'
            option netmask '255.0.0.0'

    config globals 'globals'
            option ula_prefix 'fdc2:e5c5:e839::/48'

    config interface 'lan'
            option force_link '1'
            option type 'bridge'
            option proto 'static'
            option netmask '255.255.255.0'
            option ip6assign '60'
            option ifname 'eth0.1'
            option ipaddr '192.168.2.1'

    config switch
            option name 'switch0'
            option reset '1'
            option enable_vlan '1'

    config switch_vlan
            option device 'switch0'
            option vlan '1'
            option ports '1 2 3 5t'

    config switch_vlan
            option device 'switch0'
            option vlan '2'
            option ports '4 5t'

    config interface 'wan'
            option proto 'dhcp'
            option ifname 'eth0.2'
            option dns '8.8.8.8 8.8.4.4'
            option peerdns '0'

    config interface 'modem'
            option proto 'dhcp'
            option ifname 'usb0'


    root@EasyBOX:~# cat /etc/config/wireless

    config wifi-device 'radio0'
            option type 'mac80211'
            option channel '11'
            option hwmode '11g'
            option path 'pci0000:00/0000:00:0e.0'
            option htmode 'HT20'
            option country 'PL'
            option disabled '0'

    config wifi-iface
            option device 'radio0'
            option network 'lan'
            option mode 'ap'
            option encryption 'psk2'
            option key '12345678'
            option ssid 'jucom24.pl'


    root@EasyBOX:~# mount
    rootfs on / type rootfs (rw)
    /dev/root on /rom type squashfs (ro,relatime)
    proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
    sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
    tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
    /dev/mtdblock5 on /overlay type jffs2 (rw,noatime)
    overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
    tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
    devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
    debugfs on /sys/kernel/debug type debugfs (rw,noatime)

    root@EasyBOX:~# df
    Filesystem           1K-blocks      Used Available Use% Mounted on
    rootfs                     576       300       276  52% /
    /dev/root                 5888      5888         0 100% /rom
    tmpfs                    30152       808     29344   3% /tmp
    /dev/mtdblock5             576       300       276  52% /overlay
    overlayfs:/overlay         576       300       276  52% /
    tmpfs                      512         0       512   0% /dev
    root@EasyBOX:~# ps
      PID USER       VSZ STAT COMMAND
        1 root      1408 S    /sbin/procd
        2 root         0 SW   [kthreadd]
        3 root         0 SW   [ksoftirqd/0]
        5 root         0 SW<  [kworker/0:0H]
        6 root         0 SW   [kworker/u2:0]
        7 root         0 SW<  [khelper]
       23 root         0 SW<  [writeback]
       24 root         0 SW<  [bioset]
       25 root         0 SW<  [kblockd]
       26 root         0 SW   [kworker/0:1]
       27 root         0 SW   [kswapd0]
      140 root         0 SW   [fsnotify_mark]
      219 root         0 SW<  [deferwq]
      220 root         0 SW   [kworker/u2:2]
      278 root         0 SW   [kworker/0:2]
      286 root         0 SW   [scsi_eh_0]
      287 root         0 SW<  [scsi_tmf_0]
      289 root         0 SW   [usb-storage]
      325 root         0 SW<  [kworker/0:1H]
      347 root         0 SWN  [jffs2_gcd_mtd5]
      402 root       888 S    /sbin/ubusd
      414 root       768 S    /sbin/askfirst /bin/ash --login
      820 root         0 SW   [ifxos]
      821 root         0 SW<  [TAPIevents]
      923 root         0 SW<  [cfg80211]
     1377 root      1040 S    /sbin/logd -S 16
     1386 root      1528 S    /sbin/rpcd
     1423 root      1560 S    /sbin/netifd
     1487 root       780 S    {p910nd} /usr/sbin/p9100d -b -f /dev/usb/lp0 0
     1530 root      2352 S    /usr/sbin/uhttpd -f -h /www -r EasyBOX -x /cgi-bin -u
     1617 root      1360 S    udhcpc -p /var/run/udhcpc-usb0.pid -s /lib/netifd/dhc
     1678 root      1360 S    udhcpc -p /var/run/udhcpc-eth0.2.pid -s /lib/netifd/d
     1682 root      2468 S    /usr/sbin/smbd -F
     1683 root      2556 S    /usr/sbin/nmbd -F
     1808 root      1656 S    /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/r
     1902 nobody     932 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf -k -x /var
     2056 root      1364 S    /usr/sbin/ntpd -n -S /usr/sbin/ntpd-hotplug -p 0.open
     2391 root      1148 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 2
    11954 root      1216 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 2
    11955 root      1364 S    -ash
    11968 root      1360 R    ps

    root@EasyBOX:~# cat /sys/kernel/debug/usb/devices

    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
    B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1d6b ProdID=0002 Rev= 3.18
    S:  Manufacturer=Linux 3.18.44 ifxusb_hcd
    S:  Product=IFX USB Controller
    S:  SerialNumber=ifxusb_hcd
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
    D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
    P:  Vendor=0424 ProdID=2514 Rev= 0.00
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
    I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

    T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=19d2 ProdID=1403 Rev=51.13
    S:  Manufacturer=ZTE,Incorporated
    S:  Product=ZTE WCDMA Technologies MSM
    S:  SerialNumber=MF8230ZTED000000CP261718ZDT0XM5OM9A4_35161H29&&&&&&&&&&&&&&&&&&0
    C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
    A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
    E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

    root@EasyBOX:~# dmesg
    [    0.000000] Linux version 3.18.44 (buildbot@node476.intranet) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49261) ) #22 Tue Nov 29 20:28:31 CET 2016
    [    0.000000] SoC: Danube rev 1.5
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
    [    0.000000] MIPS: machine is ARV752DPW - EasyBOX 802
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 04000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
    [    0.000000] On node 0 totalpages: 16384
    [    0.000000] free_area_init_node: node 0, pgdat 804282f0, node_mem_map 81007020
    [    0.000000]   Normal zone: 128 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
    [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
    [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [    0.000000] pcpu-alloc: [0] 0
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
    [    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
    [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
    [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Writing ErrCtl register=000108a7
    [    0.000000] Readback ErrCtl register=000108a7
    [    0.000000] Memory: 60144K/65536K available (3444K kernel code, 148K rwdata, 768K rodata, 164K init, 194K bss, 5392K reserved)
    [    0.000000] NR_IRQS:256
    [    0.000000] CPU Clock: 333MHz
    [    0.040000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
    [    0.040000] pid_max: default: 32768 minimum: 301
    [    0.044000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.056000] pinctrl core: initialized pinctrl subsystem
    [    0.064000] NET: Registered protocol family 16
    [    0.076000] pinctrl-xway 1e100b10.pinmux: Init done
    [    0.080000] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
    [    0.088000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
    [    0.092000]  MEM 0x0000000018000000..0x0000000019ffffff
    [    0.096000]   IO 0x000000001ae00000..0x000000001affffff
    [    0.116000] usbcore: registered new interface driver usbfs
    [    0.120000] usbcore: registered new interface driver hub
    [    0.124000] usbcore: registered new device driver usb
    [    0.128000] PCI host bridge to bus 0000:00
    [    0.132000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
    [    0.136000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
    [    0.140000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [    0.144000] pci 0000:00:0e.0: [1814:0601] type 00 class 0x028000
    [    0.144000] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
    [    0.144000] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
    [    0.144000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
    [    0.144000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
    [    0.148000] Switched to clocksource MIPS
    [    0.152000] NET: Registered protocol family 2
    [    0.160000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.168000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.172000] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.180000] TCP: reno registered
    [    0.184000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.188000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.196000] NET: Registered protocol family 1
    [    0.200000] PCI: CLS 0 bytes, default 32
    [    0.200000] gptu: totally 6 16-bit timers/counters
    [    0.208000] gptu: misc_register on minor 63
    [    0.212000] gptu: succeeded to request irq 126
    [    0.216000] gptu: succeeded to request irq 127
    [    0.220000] gptu: succeeded to request irq 128
    [    0.224000] gptu: succeeded to request irq 129
    [    0.228000] gptu: succeeded to request irq 130
    [    0.232000] gptu: succeeded to request irq 131
    [    0.244000] lantiq,vmmc 1f103000.vmmc: requested GPIO 465
    [    0.248000] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
    [    0.256000] ralink,eeprom ralink_eep: using RT2860.eeprom as eeprom
    [    0.264000] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.336000] msgmni has been set to 117
    [    0.340000] io scheduler noop registered
    [    0.344000] io scheduler deadline registered (default)
    [    0.352000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
    [    0.360000] console [ttyLTQ0] enabled
    [    0.368000] bootconsole [early0] disabled
    [    0.376000] lantiq nor flash device: 00800000 at 10000000
    [    0.380000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
    [    0.388000] Amd/Fujitsu Extended Query Table at 0x0040
    [    0.396000]   Amd/Fujitsu Extended Query version 1.1.
    [    0.400000] number of CFI chips: 1
    [    0.404000] 4 ofpart partitions found on MTD device ltq_nor
    [    0.408000] Creating 4 MTD partitions on "ltq_nor":
    [    0.412000] 0x000000000000-0x000000010000 : "uboot"
    [    0.420000] 0x000000010000-0x000000020000 : "uboot_env"
    [    0.424000] 0x000000020000-0x0000007f0000 : "firmware"
    [    0.472000] 2 uimage-fw partitions found on MTD device firmware
    [    0.476000] 0x000000020000-0x000000196929 : "kernel"
    [    0.480000] 0x000000196929-0x0000007f0000 : "rootfs"
    [    0.488000] mtd: device 4 (rootfs) set to be root filesystem
    [    0.492000] 1 squashfs-split partitions found on MTD device rootfs
    [    0.496000] 0x000000760000-0x0000007f0000 : "rootfs_data"
    [    0.568000] 0x0000007f0000-0x000000800000 : "board_config"
    [    0.612000] libphy: ltq_mii: probed
    [    0.708000] Registering RTL8306SDM switch with Chip ID: 0x5988, version: 0x0000
    [    0.712000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=1e180000.etop-ff:00, irq=-1)
    [    0.724000] wdt 1f8803f0.watchdog: Init done
    [    0.732000] TCP: cubic registered
    [    0.732000] NET: Registered protocol family 17
    [    0.736000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    0.748000] Bridge firewalling registered
    [    0.752000] 8021q: 802.1Q VLAN Support v1.8
    [    0.764000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
    [    0.788000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
    [    0.792000] Freeing unused kernel memory: 164K (80447000 - 80470000)
    [    3.804000] init: Console is alive
    [    3.808000] init: - watchdog -
    [    8.364000] exFAT: Version 1.2.9
    [    8.424000] SCSI subsystem initialized
    [    8.436000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    8.444000] ehci-platform: EHCI generic platform driver
    [    8.460000] IFXUSB: ifxusb_hcd: version 3.2 B110801
    [    8.968000] IFXUSB: USB core #0 soft-reset
    [    9.172000] IFXUSB: USB core #0 soft-reset
    [    9.172000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
    [    9.180000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
    [    9.184000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
    [    9.192000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
    [    9.196000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
    [    9.204000] IFXUSB: Init: Power Port (0)
    [    9.212000] hub 1-0:1.0: USB hub found
    [    9.212000] hub 1-0:1.0: 1 port detected
    [    9.220000] ifxusb_hcd ifxusb_hcd: requested GPIO 464
    [    9.228000] usbcore: registered new interface driver usb-storage
    [    9.592000] usb 1-1: new high-speed USB device number 2 using ifxusb_hcd
    [    9.784000] hub 1-1:1.0: USB hub found
    [    9.788000] hub 1-1:1.0: 4 ports detected
    [   10.012000] random: nonblocking pool is initialized
    [   10.068000] usb 1-1.1: new high-speed USB device number 3 using ifxusb_hcd
    [   10.208000] init: - preinit -
    [   10.532000] usb-storage 1-1.1:1.2: USB Mass Storage device detected
    [   10.536000] scsi host0: usb-storage 1-1.1:1.2
    [   11.540000] scsi 0:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
    [   11.552000] scsi 0:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
    [   11.568000] sd 0:0:0:1: [sda] Attached SCSI removable disk
    [   14.780000] mount_root: loading kmods from internal overlay
    [   15.948000] jffs2: notice: (344) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [   15.964000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [   15.968000] block: unable to load configuration (fstab: Entry not found)
    [   15.976000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
    [   15.980000] block: unable to load configuration (fstab: Entry not found)
    [   15.988000] block: attempting to load /etc/config/fstab
    [   15.996000] block: unable to load configuration (fstab: Entry not found)
    [   16.004000] block: no usable configuration
    [   16.264000] jffs2: notice: (341) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [   16.948000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [   16.956000] block: unable to load configuration (fstab: Entry not found)
    [   16.964000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
    [   16.968000] block: unable to load configuration (fstab: Entry not found)
    [   16.976000] block: attempting to load /etc/config/fstab
    [   16.980000] block: unable to load configuration (fstab: Entry not found)
    [   16.988000] block: no usable configuration
    [   16.996000] mount_root: overlay filesystem has not been fully initialized yet
    [   17.004000] mount_root: switching to jffs2 overlay
    [   17.072000] procd: - early -
    [   17.072000] procd: - watchdog -
    [   18.216000] procd: - ubus -
    [   19.232000] procd: - init -
    [   28.384000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
    Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
    [   28.428000] NET: Registered protocol family 8
    [   28.432000] NET: Registered protocol family 20
    [   28.460000] tun: Universal TUN/TAP device driver, 1.6
    [   28.464000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [   28.480000] gre: GRE over IPv4 demultiplexor driver
    [   28.488000] ip_gre: GRE over IPv4 tunneling driver
    [   28.508000] IFX MEI Version 5.00.00
    [   28.532000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
    [   28.556000] fuse init (API version 7.23)
    [   28.584000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
    [   28.592000] Backport generated by backports.git backports-20151218-0-g2f58d9d
    [   28.628000] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
    [   28.636000] request_timer(3, 0x000001AE, 1)...successful!
    [   28.640000] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
    [   28.660000] ATM1.0.26    ATM (A1) firmware version 0.17
    [   28.664000] ifxmips_atm: ATM init succeed
    [   28.684000] nf_conntrack version 0.5.0 (942 buckets, 3768 max)
    [   29.232000] usbcore: registered new interface driver usblp
    [   29.324000] xt_time: kernel timezone is -0000
    [   29.332000] usbcore: registered new interface driver cdc_ether
    [   29.456000] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   29.720000] PPP generic driver version 2.4.2
    [   29.728000] PPP MPPE Compression module registered
    [   29.740000] NET: Registered protocol family 24
    [   29.748000] PPTP driver version 0.8.5
    [   29.772000] rndis_host 1-1.1:1.0 usb0: register 'rndis_host' at usb-ifxusb_hcd-1.1, RNDIS device, 36:4b:50:b7:ef:2d
    [   29.780000] usbcore: registered new interface driver rndis_host
    [   29.896000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
    [   29.900000] rt2800pci 0000:00:0e.0: failed to load eeprom property
    [   29.904000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'.
    [   29.916000] rt2800pci 0000:00:0e.0: Direct firmware load for RT2860.eeprom failed with error -2
    [   29.924000] rt2800pci 0000:00:0e.0: Falling back to user helper
    [   31.984000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
    [   31.988000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
    [   31.996000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   64.136000] device eth0.1 entered promiscuous mode
    [   64.140000] device eth0 entered promiscuous mode
    [   65.760000] br-lan: port 1(eth0.1) entered forwarding state
    [   65.764000] br-lan: port 1(eth0.1) entered forwarding state
    [   67.768000] br-lan: port 1(eth0.1) entered forwarding state
    [   78.012000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
    [   78.080000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
    [   78.256000] device wlan0 entered promiscuous mode
    [   83.304000] br-lan: port 2(wlan0) entered forwarding state
    [   83.308000] br-lan: port 2(wlan0) entered forwarding state
    [   85.312000] br-lan: port 2(wlan0) entered forwarding state
    [87151.100000] ieee80211 phy0: rt2800mmio_txstatus_is_spurious: Warning - 4 spurious TX_FIFO_STATUS interrupt(s)
    [87151.108000] ieee80211 phy0: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
    [130701.548000] ieee80211 phy0: rt2800mmio_txstatus_is_spurious: Warning - 4 spurious TX_FIFO_STATUS interrupt(s)
    [130701.560000] ieee80211 phy0: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping

    root@EasyBOX:~# lsmod
    aead                    4240  0
    arc4                    1280  2
    atm                    38178  2 ltq_atm_danube
    br2684                  6864  0
    cdc_ether               4092  1 rndis_host
    cfg80211              227491  2 rt2x00lib
    compat                 15730  3 rt2800pci
    crc_ccitt               1003  2 rt2800lib
    crc_itu_t               1003  0
    crypto_blkcipher       10775  2 ecb
    drv_dsl_cpe_api       121104  0
    drv_ifxos              15018  2 drv_vmmc
    drv_tapi              148006  1 drv_vmmc
    drv_vmmc              148934  0
    dwc2                   51991  1 dwc2_platform
    dwc2_platform           2400  0
    ecb                     1296  0
    eeprom_93cx6            1791  1 rt2800pci
    ehci_hcd               35148  1 ehci_platform
    ehci_platform           3584  0
    exfat                  97387  0
    ext4                  347564  0
    fat                    50159  1 vfat
    fuse                   72137  0
    gpio_button_hotplug     6144  0
    gre                     3771  2 pptp
    ip_gre                  6816  0
    ip_tables              10461  4 iptable_nat
    ip_tunnel              11475  1 ip_gre
    ipt_MASQUERADE           624  1
    ipt_REJECT               992  2
    iptable_filter           672  1
    iptable_mangle           944  1
    iptable_nat              752  1
    iptable_raw              640  1
    jbd2                   54434  1 ext4
    ledtrig_usbdev          1952  0
    ltq_atm_danube         29894  0
    ltq_hcd_danube         44424  0
    ltq_mei_danube         17576  2 ltq_atm_danube
    mac80211              432906  3 rt2800lib
    mbcache                 4989  1 ext4
    mii                     3608  1 usbnet
    nf_conntrack           52382 26 nf_nat_pptp
    nf_conntrack_amanda     1920  1 nf_nat_amanda
    nf_conntrack_broadcast     893  1 nf_conntrack_snmp
    nf_conntrack_ftp        5440  1 nf_nat_ftp
    nf_conntrack_h323      35055  1 nf_nat_h323
    nf_conntrack_ipv4       5200  8
    nf_conntrack_irc        2832  1 nf_nat_irc
    nf_conntrack_pptp       3440  1 nf_nat_pptp
    nf_conntrack_proto_gre    2910  1 nf_conntrack_pptp
    nf_conntrack_rtcache    2624  0
    nf_conntrack_sip       18573  1 nf_nat_sip
    nf_conntrack_snmp        768  1 nf_nat_snmp_basic
    nf_conntrack_tftp       2832  1 nf_nat_tftp
    nf_defrag_ipv4           822  1 nf_conntrack_ipv4
    nf_log_common           2495  1 nf_log_ipv4
    nf_log_ipv4             3232  0
    nf_nat                 10524 12 nf_nat_pptp
    nf_nat_amanda            768  0
    nf_nat_ftp              1232  0
    nf_nat_h323             5056  0
    nf_nat_ipv4             4305  1 iptable_nat
    nf_nat_irc               976  0
    nf_nat_masquerade_ipv4    1532  1 ipt_MASQUERADE
    nf_nat_pptp             1440  0
    nf_nat_proto_gre         848  1 nf_nat_pptp
    nf_nat_sip              7568  0
    nf_nat_snmp_basic       6544  0
    nf_nat_tftp              544  0
    nf_reject_ipv4          1891  1 ipt_REJECT
    nls_cp437               4416  0
    nls_iso8859_1           2880  0
    ppp_async               7616  0
    ppp_generic            22242  5 pppoe
    ppp_mppe                4976  0
    pppoe                   9392  0
    pppox                   1370  2 pppoe
    pptp                   14208  0
    rndis_host              5193  0
    rt2800lib              94816  2 rt2800pci
    rt2800mmio              7218  1 rt2800pci
    rt2800pci               4048  0
    rt2x00lib              37423  5 rt2800pci
    rt2x00mmio              1968  2 rt2800pci
    rt2x00pci               1522  1 rt2800pci
    scsi_mod               93095  2 usb_storage
    sd_mod                 27728  0
    sha1_generic            1475  0
    slhc                    4907  1 ppp_generic
    ts_bm                   1424  0
    ts_fsm                  2560  0
    ts_kmp                  1328  5
    tun                    16751  0
    usb_storage            39791  0
    usblp                   8784  0
    usbnet                 18614  2 rndis_host
    vfat                    8432  0
    x_tables               12018 21 iptable_raw
    xt_CT                   2560  0
    xt_LOG                   752  0
    xt_REDIRECT             1248  0
    xt_TCPMSS               2688  2
    xt_comment               480 27
    xt_conntrack            2160  7
    xt_id                    480  0
    xt_limit                1344  1
    xt_mac                   624  0
    xt_mark                  656  0
    xt_multiport            1200  0
    xt_nat                  1056  0
    xt_state                 704  0
    xt_tcpudp               1680  6
    xt_time                 1808  0

    0
  • #13 23 Kwi 2018 14:12
    jurek.adam
    Poziom 43  

    Moduły od modemu są OK. chyba coś schrzanione na styku WAN->LAN. Ten router spokojnie ogarnia ~70-90MB/s z NAT na oryginalnym sofcie, ale nie wiem co w OpenWRT go boli.

    0