Elektroda.pl
Elektroda.pl
X

Search our partners

Find the latest content on electronic components. Datasheets.com
Elektroda.pl
Please add exception to AdBlock for elektroda.pl.
If you watch the ads, you support portal and users.

Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko

tomasz79 23 Aug 2018 15:40 2571 21
  • #1
    tomasz79
    Level 11  
    Witam.
    Poszukuję wsadu do pamieci 25q16.
    lub przez usb.
    Płyta: vpz190r-4 v-0
    Matryca: lg lc215eue (sd)(a1)
    Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko
    Za pomoc dziękuję
    Ethernet jednoparowy (SPE) - rozwiązania w przemyśle. Szkolenie 29.09.2021r. g. 11.00 Zarejestruj się za darmo
  • #2
    billobirillo
    Level 27  
    file 25Q16 V04.000.00.bin is the dump

    but, before or after the spi reprogramming, try this...

    copy the folder Target (in the file GRUNDIG 22VLE7120BF JYK000 056D22-LP6.rar) on an empty usb stick formatted fat32
    insert the usb stick to the TV
    while holding P+, insert the power cord: an update screen will appear... wait: the TV will restart by itself

    after sw update, enter in service mode (MENU 8500)
    in system configuration, set TV Mode on Customer
    after, Plug Play and reset (wait for the writing DONE)
    unplug the power cord and the usb stick
    insert the power cord: the TV will start in first installation mode

    the tv, now, will be updated to version V05.020.00
  • #3
    tomasz79
    Level 11  
    Hello.
    Thanks for help in my topic, but the batch does not match. An attempt to upload via usb switches on the backlight and so much. The thread does not change the memory.
  • #4
    zipak
    Level 10  
    Hello colleagues,


    thanks for advice. Thanks to "billobirillo" suggestion I applied this procedure to GRUNDIG 26VLE7101BF. Symptoms on my broken TV: Just blue STANDBY led, no reaction on remote control and side control buttons also.

    My workaround

    1. Preparing USB flash drive
    - format USB drive to FAT32 file system
    - copy unpacked content from "billobirillo" *.rar file to USB

    Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko

    2. Unplug the power cord from the net
    3. Plug USB drive to main board
    4. Hold P+ side control button
    5. Plug power cord to net
    6. Update procedure started - wait for completion of the firmware update and restart of the TV
    7. Switch off the TV
    8. Unplug the power cord from the net and than USB drive

    Hope TV will than work :-)

    9. Make the factory reset according to "billobirillo" advice.

    Best regards
    Elbas
  • #5
    tomasz79
    Level 11  
    Hello.
    For me there is no P + button.
    However, there is -, +, V / P, Standby.
    I do not like this soft under my TV, I need another one.
  • #6
    billobirillo
    Level 27  
    tomasz79 wrote:
    Hello.
    For me there is no P + button.
    However, there is -, +, V / P, Standby.
    I do not like this soft under my TV, I need another one.


    copy the folder Target (in the file GRUNDIG 22VLE7120BF JYK000 056D22-LP6.rar) on an empty usb stick formatted fat32
    insert the usb stick to the TV
    while holding P+ (or any key of the keypad), insert the power cord: an update screen will appear... wait: the TV will restart by itself

    it must work!!
  • #7
    zipak
    Level 10  
    Hello Tom,

    my TV have these buttons on side control panel.

    Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko

    Maybe some similar approach can work with the remote control. Similar approach use Vestel, they use OK button on remote control and plugging power cord to the net to initialize update procedure form USB.

    Regards
  • #8
    tomasz79
    Level 11  
    billobirillo wrote:
    tomasz79 wrote:
    Hello.
    For me there is no P + button.
    However, there is -, +, V / P, Standby.
    I do not like this soft under my TV, I need another one.


    copy the folder Target (in the file GRUNDIG 22VLE7120BF JYK000 056D22-LP6.rar) on an empty usb stick formatted fat32
    insert the usb stick to the TV
    while holding P+ (or any key of the keypad), insert the power cord: an update screen will appear... wait: the TV will restart by itself

    it must work!!


    You can put a photo of the main board

    Dodano po 1 [minuty]:

    zipak wrote:
    Hello Tom,

    my TV have this button on side control panel.

    Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko

    Maybe some similar approach can work with the remote control. Similar approach use Vestel, they use OK button on remote control and plugging power cord to the net to initialize update procedure form USB.

    Regards

    You can put a photo of the main board
  • #10
    tomasz79
    Level 11  
    Grundig 22vle7120 bf - Nie włącza się dioda miga na niebiesko

    Dodano po 1 [minuty]:

    It seems to me that there are different panels
  • #11
    zipak
    Level 10  
    You are right, it is clear from the type of the TV, what I mentioned in previous post. 26 inch LG panel - type LC260EXN. I am convinced that firmware will be common for all TVs from the VLE series with this main board. Just some adjustment in service menu will probably needed. You will see. Try the procedure recommended by "billobirillo". I hope, that you will find the right way, how to fix your TV. Post from "billobirillo" helps me a lot, with that firmware I fixed broken firmware for the GRUNDIG 26VLE7101BF.

    Just in case, here is dump of the IC105/6 from my TV

    GRUNDIG_26...16_DMP.bin Download (2 MB)Points: 1 for user

    Regards
  • #12
    tomasz79
    Level 11  
    When I do the upload procedure, the panel backlight turns on but there is no image content. Probably the damage is on the motherboard. I will try to upload your batch.
  • #13
    zipak
    Level 10  
    Hi Tom,

    after the firmware update the screen was without picture, I sow just clear screen with backlight, then I pressed the MENU button on then side control panel and menu appeared.
  • #14
    tomasz79
    Level 11  
    I will try tomorrow and give an answer
  • #17
    oipe65
    Level 1  
    Greetings to all. First I would like to thank billobirillo for posting the files and all those who helped with their advice, I would like to confirm that these files worked perfectly on a 46VLE5130BF making it resurrect from a long hibernation, the first attempt with the key from 4gb failed the second with 1gb key was successful, for clarity in the key I put the target folder and the 2 files BOOT.TF.-.-.-.-. V04.000.00.bin and mboot.bin
  • #19
    Juri89
    Level 1  
    Ho una tv grundig 40 vle 5130bf la luce blu lampeggia ma non si accende qualcuno ha un software x riavviare la tv mi qualcuno mi puoi aiutare
  • #21
    manolo250
    Level 1  
    Procedimiento hecho en 26VLE 7101BF con exito.
    Televisor recuperado.
    Gracias.
  • #22
    dollaro
    Level 1  
    Tutto perfetto grazie al forum ( Funzionante tv grundig 26 vle 5100 bf )