[Solved] Vestel 17MB211 dump needed

Mark: Telefunken
Model: TE32269B38Y2D
Chassis (main board, components): 17MB211
LCD Screen/Panel (if exist): Ves315WNDA-2D-N12
More informations: Smart tv, double tuner.

what's the fault?

Won't turn on, no standby led, PSU is working just fine, I do find some voltages on the motherboard so I wanted to try flashing.

Insert your friend photo of the TV model sticker .

elmo071 wrote:

Insert your friend photo of the TV model sticker .

Sure, I've uploaded the panel sticker too.

I have dump but under the matrix ves315wnds-2d-n14, ves315wnds-2d-n15 with the same main
I mistyped VES315WNDA ...-VES315WNDS...

elmo071 wrote:

I have dump but under the matrix Ves315WNDA-2D-N14, Ves315WNDA-2D-N15 with the same main

I don't know what the differences are between the panels..caould you post it anyway? I'll search for infos about the panels, if I can't find nothing I'll just save a backup of its firmware and try yours.

Mainboard similar and matrix
MODEL : CROWN 32289T2SM
PŁYTA: 17MB110P
PAMIĘĆ : MX25L1605
MATRYCA: VES315WNDA-2D-N12
Dump to check

Thanks for posting but I decided not to flash this dump as the board is too different, I think nothing good could come from flashing it's dump.

So my requests still stands, I need another dump.

Mainboard they are similar

Yeah I can see that but the board I have on this tv has a sat tuner, wifi support, there could be a different processor under that heatsink.
It has a completely different model code 17mb211 vs 17mb110p, I thank you for your effort, sometimes you listen to your gut and now mine is telling me this is too different even if the general layout is VERY similiar.
Again, thank you tho.

Edit:
I found this

Acca85, let me see your software?

I still haven't tried to read it since I have to desolder the IC from the board 'couse the clip won't fit between the heatsink and the SAT module.
I'll post it as soon as possible tho.

So this morning I desoldered the memory from my board (winbond 25q16jvsiq) and tried to read it but it was completely empty, and I mean it, no data at all.
So I flashed the firmware from the the topic I linked earlier and the tv now works.