Elektroda.pl
Elektroda.pl
X
PCBway
Proszę, dodaj wyjątek dla www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

i9300 - nie mogę odzyskać danych

16 Lis 2018 18:08 81 1
  • Poziom 1  
    witam
    próbuję zczytać dane z uszkodzonej i9300.
    Wyjąłem emmc , wlutowałem jtag wg opisu octoplus, zycztuje układ , ale nie widzi żadnych danych , nie mogę tez odczytać zawartości.
    Miał ktoś coś podobnego?

    LOG wygląda tak
    Cytat:


    Please disconnect battery and USB cable.

    Model Settings:
    Interface : eMMC
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto

    Connecting...
    Device : Samsung eMMC 000000
    Page size : 512 B
    Block size : 512 B
    Block count : 33554432
    Size : 16.00 GB (16384.00 MB)
    ---------------------------------------------------------------
    CID Info

    CID : 1501003030303030305620110726589D
    Manufacturer ID : 0X15
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X00
    Product name : 000000
    Product revision : 5.6
    Product serial number : (hex) 20110726
    Manufacturing date : 05/2021
    ---------------------------------------------------------------
    CSD Info

    CSD : 902701320F5903FFF6DBFFEF8A404023
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 15 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info

    Revision 1.5 (for MMC v4.41)
    Erase block size : 512 Kbytes
    Boot1 size : 512 Kbytes
    Boot2 size : 512 Kbytes
    RPMB size : 128 Kbytes

    Partition config : (0x00) 00000000
    Boot partition enable : Device not boot enabled (default)
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)

    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)

    RST_n function : (0x00) RST_n signal is temporary disabled (default)

    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 4026531840 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b

    ---------------------------------------------------------------Searching Android build info...
    Not found
    ---------------------------------------------------------------
    Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/000000_16_11_2018_18_03_39.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 1.5.4; FW: 1.23.
    [/code]
  • PCBway