Elektroda.pl
Elektroda.pl
X
Proszę, dodaj wyjątek dla www.elektroda.pl do Adblock.
Dzięki temu, że oglądasz reklamy, wspierasz portal i użytkowników.

PHILIPS 49PUS6031-szukam mboot

10 Gru 2018 23:02 1662 3
  • Poziom 10  
    Marka:Philips
    Model:49pus6031
    Chassis (płyta lub główne podzespoły):17mb120
    Matryca/Panel (jeśli występuje):ves490qndl-2d-u11
    Inne (uwagi): NAND Flash29F4G08
    u11,u13 wgrane brakuje wsad do Nand-a ,chciałbym to zrobić przez usb.
  • Poziom 10  
    Witam.
    Szukałem,ale nic nie wgrało.Mój Tv nie wyświetla nic tylko pionowe pasy.Reaguje przy sposobie wgrania z "ok"tj.mruga dioda szybko.Może trzeba 3pliki?
  • Poziom 22  
    Make a request for software here: VESTEL Production is subject to FULL software request for all products
    FULL software contains 4 files and Core software contains 2 files.
    17MB120 Full
    1. The following files are copied into the blank and formatted USB memory.
    • mb120_en.bin
    • romBoot.bin
    • mb120_PM51.bin
    • usb_auto_update_G6.txt
    2. The cable of the TV 220 is unplugged. The USB memory from which the software is copied is inserted into the USB-1 port of the TV.
    3. Connect the 220 cable to the outlet. Press the OK button of the remote control until the LED flashes.
    4. The software starts loading automatically when the LED starts flashing.
    5. When the LED flashes, the software installation process is completed.
    * The installed software version can be controlled from other settings and service menus.

    17MB120 Core
    1. The following files are copied into empty and formatted USB memory.
    • mb120_en.bin
    • usb_auto_update_G6_core.txt
    2. Unplug the cable of the TV 220. The USB memory from which the software is copied is inserted into the USB-1 port of the TV.
    3. Connect the 220 cable to the outlet. Press the OK button of the remote control until the LED flashes.
    4. The software starts loading automatically when the LED starts flashing.
    5. When the LED flashes, the software installation process is completed.
    Core update is the same as the software installation procedure, only the d usb_auto_update.txt ile script that is specific for the core update should be used. The script name is the same as the script file used in the normal installation, but the content of the file is different.