logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

tv-out sis 6326 rev d2

ralf27 21 Paź 2005 20:51 846 1
REKLAMA
  • #1 1917332
    ralf27
    Poziom 2  
    mam problem z uruchomieniem tv-out w karcie graficznej sis 6326 rev d2. Zainstalowałem najnowsze sterowniki do win me ale w zakładce właściwości nie pojawiło się nic oprócz możliwości regulacji obrazu monitora nic zaś o tv.Proszę o pomoc może ktoś miał już taki poblem?
  • REKLAMA
  • #2 1944116
    Adam770
    Poziom 20  
    A czy kabel tv masz podłączony?
    Tu jest cytat ze strony SIS, może pomoże:D
    Cytat:
    Q: How can I get the SiS TV-OUT function enable?
    A: SiS TV-out function supports both NTSC and PAL system. You have to select the one which matches your TV system. In general, it is controlled by a jumper on the motherboard or the graphics card. We suggest you to check your user manual out for the setting. The following is the instruction to connect to TV:
    1). Connect with TV by either a S connector or an AV connector.
    2). Boot the Win95/98/ME system up then you will find the tap SiS TV-OUT under Display Properties. Choose the display mode to VGA+TV or TV Only then you can get the TV-OUT.
    3). If using Windwos 2000, there isn't a tap under Display Properties, Please set your display mode on 640*480 60Hz for NTSC, or 640*480/800*600 50Hz for PAL to get TV-OUT. Don't set your display mode to other mode for TV-OUT, most TV set can't support other display modes except above mode.
REKLAMA