Elektroda.pl
Elektroda.pl
X

Search our partners

Find the latest content on electronic components. Datasheets.com
Elektroda.pl
Please add exception to AdBlock for elektroda.pl.
If you watch the ads, you support portal and users.

Zgemma H9S - nie wstaje (tylko logo)

saviZKS 24 Nov 2021 22:26 117 0
Computer Controls
  • #1
    saviZKS
    Level 10  
    Witam,
    Mam problem z w/w tunerem. Po uruchomieniu stoi na logu oprogramowania + czerwona dioda.
    Nie pomaga zmiana softa. Zasilacz OK. Jakieś sugestie?
    Poniżej log:
    Code:
    Bootrom start
    
    Boot Media: NAND
    Decrypt auxiliary code ...OK

    lsadc voltage min: 000003F3, max: 000003FF, aver: 000003FC, index: 00000000

    Enter boot auxiliary code

    Auxiliary code - v1.00
    DDR code - V1.1.2 20160205
    Build: Nov 29 2017 - 19:57:41

    Reg Version:  v1.6.0\
    Reg Time:     2018/04/24 09:43:23
    Reg Name:     hi3798mv2dmp_hi3798mv200_DDR3-1866_1GB_16bitx2_2layers.reg

    Boot auxiliary code success
    Bootrom success


    System startup


    Relocate Boot

    Jump to C code


    Compressed-boot v1.0.0
    Uncompress........................Ok


    System startup


    Relocate Boot

    Jump to C code


    Fastboot 3.3.0 (h9@builder) (Jul 25 2019 - 00:50:56)

    Fastboot:      Version 3.3.0
    Build Date:    Jul 25 2019, 00:53:33
    CPU:           Hi3798Mv200
    Boot Media:    NAND
    DDR Size:      1GB

    Found flash memory controller hifmc100.
    Nand ID: 0x01 0xDA 0x90 0x95 0x44 0x01 0xDA 0x90

    Nand: AMD NAND 256MiB 3,3V 8-bit
    Nand(HW-Auto): Block:128KB Page:2KB OOB:64B ECC:4bit/512 Chip:256MB*1

    MMC/SD controller initialization.
    No MMC device found !



    *******************************

    serial: 462000179A25FC7A
    mac:    00:17:9A:25:FC:7A

    *******************************

    Net:   eth0 phymdio(31) invalid, use default:0
    upWarning: failed to set MAC address
    , downWarning: failed to set MAC address
    , gmac0Warning: failed to set MAC address


    Boot Env on NAND
        Env Offset:          0x00100000
        Env Size:            0x00010000
        Env Range:           0x00010000


    SDK Version: h9

    Reserve Memory
        Start Addr:          0x3FFFE000
        Bound Addr:          0x8D80000
        Free  Addr:          0x3EBEC000
        Alloc Block:  Addr         Size
                      0x3FBFD000   0x400000
                      0x3F8FC000   0x300000
                      0x3F8F9000   0x2000
                      0x3F878000   0x80000
                      0x3F57A000   0x2FD000
                      0x3ED90000   0x7E9000
                      0x3ED8C000   0x3000
                      0x3EBF6000   0x195000
                      0x3EBEC000   0x9000

    Press Ctrl+C to stop autoboot

    NAND read: device 0 offset 0x600000, size 0x800000
    pure data length is 8388608, len_incl_bad is 8388608
    request to read 0x800000, and read 0x800000 successfully!
     8388608 bytes read: OK
    ## Booting kernel from Legacy Image at 01000000 ...
       Image Name:   Linux-4.4.35
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    5552251 Bytes = 5.3 MiB
       Load Address: 02000000
       Entry Point:  02000000
       Verifying Checksum ... OK
       Loading Kernel Image from 0x16777280 to 0x33554432 ... OK
    OK
    ATAGS [0x00000100 - 0x0000040C], 780Bytes

    Starting kernel ...
    Kamery 3D Time of Flight - zastosowania w przemyśle. Darmowe szkolenie 16.12.2021r. g. 10.00 Zarejestruj się
  • Computer Controls