logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

[Rozwiązano] Peugeot 206 2.0 HDI EDC15C2 66 - Samoczynne wyłączanie się po 2-3 sekundach, przyczyny

bpkhadgi27 03 Paź 2022 16:35 234 5
REKLAMA
  • #1 20219509
    bpkhadgi27
    Poziom 2  
    Peugeot 206 2.0 HDI EDC 15c2 66 starts up and auto shuts off after 2-3 seconds what could be the reason for this please advise
  • REKLAMA
  • Pomocny post
    #2 20219515
    seat21
    Poziom 29  
    and what are the Ecu errors
  • REKLAMA
  • #3 20219666
    bpkhadgi27
    Poziom 2  
    There is no ECU total error, the start stops in just 2-3 seconds, then after removing the minus wire of the battery for a moment, the beans start again.
  • REKLAMA
  • Pomocny post
    #4 20219817
    seat21
    Poziom 29  
    and presure raill
  • REKLAMA
  • Pomocny post
    #5 20223205
    żałosna udręka
    Poziom 34  
    If you haven't any error that must be power supply. The ECM will not stop the engine without an error code. Maybe you can't read everything faults?
  • #6 20244856
    bpkhadgi27
    Poziom 2  
    Hi sir good day, My Peugeot 206 2.0 hdi year 2002 switch on that time 5 pin maf sensor shows 4.5 volt in connector number 1 and 12 voltage on number 2 I am confused in this so please tell me the color of five wire with one to five detail. Please I'm wait for your quick response.

    Thank you
    BP Khadgi
REKLAMA