Elektroda.pl
Elektroda.pl
X
Please add exception to AdBlock for elektroda.pl.
If you watch the ads, you support portal and users.

w810i cid 49 CRUISER nei dizała:(

gw007 23 Aug 2006 22:21 3906 21
Computer Controls
  • #1
    gw007
    Level 20  
    Mam niezły problem, telefonik padł zapewne po silmoku trudno mi powiedizeć co było kombinowane.

    PRzejzałem wszystkie posty na temat tego i nie mam pomysłow.

    Teraz telefonik przeszedł:

    Unlock rsa

    restore firmewere

    W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw

    W810i_CXC1250324_CentEurope_R4CK003_Brown49.cw81fs

    customizacja

    zamknecie gdfs

    Telefon nie daje znaku zycia:(
  • Computer Controls
  • #2
    slaby6
    Level 11  
    Może to banalne, ale sprawdź baterie, z doświadczenia wiem że przy flashowaniu na cruiserze napięcie na baterii może spaść do 3,2V a przy takim napięciu napewno się nie włączy.

    Pozdro
  • #3
    ZAJCEWW
    Level 15  
    Cruiser normalnie ci go wykrywa, flashuje, ale telefon nie wstaje?
    Co się dzieje jak próbujesz włączyć? Przypadkiem nie zapala ci się czerwona dioda sygnalizująca padniętą baterię?
  • Computer Controls
  • #5
    slaby6
    Level 11  
    misio745 wrote:
    Też miałem ten problem ale wyciągnołem baterie wsadziłem i poszło!!


    Sądzę że kolega gw007 już przeprowadzał takie manewry, ale zawsze się mogę mylić ;)
  • #6
    gw007
    Level 20  
    Bateria jest dobra, mam sam k750i na szczescie w cid 36. Lampka tez nei mryga czerwona bo bater jest w pełni naładowana. Telefon nawet nie włączy sie na chwile.
  • #7
    leon.euro
    GSM specialist
    czy wyskakuja jakies bledy?? to raz dwa
    wgraj gdfs i jedna sprawa po rsa nie widze zebys zrobil simlocka...
    i po tym restore i powinien wstac...
    nastepna sprawa jak mozna wgrywac softy o roznych kolorach
    "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw
    W810i_CXC1250324_CentEurope_R4CK003_Brown49.cw81fs "
    - to jak to moze chodzic??

    sprawdz to lub odezwi sie na priva:)

    pozdrawiam leon.
  • #10
    slaby6
    Level 11  
    Raczej to nie bedzie wina softu chyba ze masz zaznaczona zmiane certyfikatu podczas flashowania, nie wiem po co wgrywac GDFS, jak tel chodzil wczesniej to raczej nie ma potrzeby, wiec po kolei:
    1. Unlock RSA
    2. Restore firmware
    3. Flash main i fs (bez odłaczania telefonu, tzn zaznaczasz oba naraz)
    4. modyfikacja Sp

    po tym powinien wstac bez problemu

    Pozdro
  • #11
    BRh+
    Level 13  
    Witam.

    A ja bym sprobowal inaczej:

    - Attach fone
    - Unlock RSA
    - Zabawa z wyjeciem i wlozeniem aku
    - Attach fone
    - Unlock Simlock ,code .....
    - Flash Main
    - Detach Fone
    - Attach Fone
    - Unlock RSA
    - Flash FS
    - Customizacja FS
    - Detach Fone
    - Attach Fone
    - Restore Firmware.

    Pozdrawiam....
    PS. Oczywiscie zainstalowane CruiserFWRestore_v1.04_installer
  • #12
    gw007
    Level 20  
    Na suporcie cruisera sa dla Polski tylko:

    W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw
    W810i_CXC1250324_CentEurope_R4CK003_Brown49.cw81fs

    czy to bez roznicy ze softy sa tak kolorowe?
  • #13
    BRh+
    Level 13  
    @gw007 ,do kilkudziesieciu w810 programowalym tymi flashami i kazdy dziala poprawnie....
    Spoko mozesz robic ....
  • #14
    gw007
    Level 20  
    1: CONNECT NORMAL BOOT
    2: FLASH W810i_CXC1250324_Europe1_R4CK003_Brown49.cw81fs
    3: FLASH REPLACE FLASH ARM "W810i_FullGDFS_Brown49.cw81sw"
    4: RE FLASH AGAIN WITH THIS FLASH ARM "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw"
    5: CONNECT AFTER UNLOCK RSA
    6: RAW FS "W810i_CXC1250324_Europe1_R4CK003_Brown49.cw81fs"
    7: CUSTOMIZ FS DONE
    8: SHUT DOWN FS
    9: CONECT NOW JUSTE CLIQUE "RESTORE FIRWARE "
    10: NOW UR PHONE IS ALIVE SOLUTION TESTED BY ME 10000% WORK

    zrobilem jak w tym opisie i telefon nadal nie wstaje, prubowalem chyba wszystkiego z forum
  • #15
    BRh+
    Level 13  
    @gw007 ,czym ty robisz tego fona ?

    podaj log z cruisera 9.74 ....


    Pozdrawiam....
  • #16
    gw007
    Level 20  
    Robiłem 9.74 ale ona jeast lewa bo nie moge wgrac softu:

    System diagnostics passed.
    Version 9.74 ready!

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Unlock RSA --- ]
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:00:01
    Flash process done.
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Direct Unlock --- ]
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Initializing applet...
    Baudrate = 460800Bd
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Defeated!
    Sending applet...
    Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER_R1A
    Sending applet...
    Applet ID: 060430 0501 CRUCXC1326743_COMPACTPRODUCTION SIB
    Reading security zone...
    Unlocking phone...
    Recalculating CRCs...
    Phonecode: 0000 (default)
    Turning off phone...
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Flash Raw File System --- ]
    Flash file: "W810i_CXC1250324_Mediterr_R4CK003_Red49.cw81fs"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...


    Error flashing block at address: 0x46050000
    Script error: Flash error [9.74.75]


    Dlatego korzystam z 9.68

    Teraz na tej starszej wersji sprawdze:

    @@@ w810i HERE SOLUTION FLASH WORK AND TESTED @@@
    1. Attach the phone to Cruiser
    2. Unlock RSA
    3: REMOVE BATTERY AND PUT AGAIN
    4: Attach the phone to Cruiser
    4. Do Unlock
    5. Flash FS " W810i_CXC1250324_Mediterr_R4CK003_Red49.cw81fs"
    6. Customise FS
    7. Shut Down FS
    8: FLASH MAIN WITH THIS " W810i_FullGDFS_Brown49.cw81sw"
    9: FLASH AGAIN MAIN WITH " W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw"
    10: EXTRACT THIS "W810_Restoral_2006-05-11" AND PUT THE FOLDER TO PROGRAME FILE/CRUISER/RESTORE/W810
    11: RESTORE FIRMWARE
    12: NOW THE PHONE WITH PLEAZE WAIT TURN OFF AND Attach AGAIN
    13: UNLOCK RSA
    14: GO TO FINAL GDFS
    15: RESTORE FIRMWARE AGAIN
    NOW UR PHONE ALIVE AND LIKE HORSE

    SOLUTION BY ZINEGSM ® THE BEST OF THE BEST REPAIRE PHONE
    TXS FOR CRUISER TEAM ALWAYS BST OF SOLUTION SE IN THE WORD

    Dodano po 59 [minuty]:

    Version 9.68 ready!
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:00:01
    Flash process done.
    Phone automatically detached.
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Initializing applet...
    Baudrate = 460800Bd
    Defeated!
    Sending applet...
    Reading security zone...
    Unlocking phone...
    Recalculating CRCs...
    Phonecode: 0000 (default)
    Turning off phone...
    Phone automatically detached.
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK
    Flash file: "W810i_CXC1250324_Mediterr_R4CK003_Red49.cw81fs"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:04:00
    Flash process done.
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Initializing applet...
    Baudrate = 460800Bd
    Defeated!
    Sending CS applet...
    The applet ignored baudrate change request!
    Initializing CS applet...
    Baudrate = 921600Bd
    Starting up GDFS service...
    Starting up filesystem, please wait...
    Building customization...
    Customizing phone...
    Done.
    Writing CDA Article MS string...
    Done.
    Writing CDA Version MS string...
    Done.
    Writing Default Article MS string...
    Done.
    Writing Default Version MS string...
    Done.
    Writing langpack string...
    Done.
    Writing country...
    Done.
    Uploading certificates...
    Certificates uploaded successfuly.
    Turning off phone...
    GDFS access terminated.
    Phone automatically detached.
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK
    Flash file: "W810i_FullGDFS_Brown49.cw81sw"
    Waiting for flash file to load...
    Preparing to program flash...
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Initializing applet...
    Baudrate = 460800Bd
    Defeated!
    Sending applet...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:03:49
    Flash process done.
    Sending CS applet...
    The applet ignored baudrate change request!
    Initializing CS applet...
    Baudrate = 921600Bd
    Starting up GDFS service...
    Starting up filesystem, please wait...
    Building customization...
    Customizing phone...
    Done.
    Writing CDA Article MS string...
    Done.
    Writing CDA Version MS string...
    Done.
    Writing Default Article MS string...
    Done.
    Writing Default Version MS string...
    Done.
    Writing langpack string...
    Done.
    Writing country...
    Done.
    Uploading certificates...
    Certificates uploaded successfuly.
    Turning off phone...
    Phone turned off.
    Phone automatically detached.
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK
    Flash file: "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:08:31
    Flash process done.
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...


    No response
    This may indicate damaged EROM area!
    This seems pretty bad...


    no i nie udało sie skonczyc calego procesu:( sprawdze baterie i powturze fs
  • #17
    slaby6
    Level 11  
    Jak jeszcze nie powstał to zrób tak:

    Odpal Cruisera 9.74:

    1. usuń RSA
    2. simlock
    3. przywróć firmware
    4. flash main i fs

    po tym napewno wstanie, a 9.74 wywala bledy jak nie zrobisz restore firmware przed flashem ( przechodzilem te tematy ;)

    Pozdro
  • #18
    gw007
    Level 20  
    System diagnostics passed.
    Version 9.74 ready!

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Unlock RSA --- ]
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:00:01
    Flash process done.
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Phone color: None
    Flash certificate: -
    All threads terminated.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Direct Unlock --- ]
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Initializing applet...
    Baudrate = 460800Bd
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Defeated!
    Sending applet...
    Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER_R1A
    Sending applet...
    Applet ID: 060430 0501 CRUCXC1326743_COMPACTPRODUCTION SIB
    Reading security zone...
    Unlocking phone...
    Recalculating CRCs...
    Phonecode: 0000 (default)
    Turning off phone...
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
    Flash manufacturer: ST Microelectronics
    Flash ID: 0x2019
    OTP Security Level: 1 (Retail)
    OTP CID: 49
    Sending applet...
    Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Restore Firmware --- ]
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Initializing applet...
    Baudrate = 460800Bd
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
    Identifying firmware...
    Firmware ID: prgCXC1250316_GENERIC_HN
    Firmware version: R4CK003
    Defeated!
    Sending applet...
    Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER_R1A
    Sending applet...
    Applet ID: 060430 0501 CRUCXC1326743_COMPACTPRODUCTION SIB
    Searching for FW restoral file...
    File name: R4CK003_CXC1250316_GENERIC_HN.cw81sw
    FW restoral file found.
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    RSA protection was set back to normal.
    Time: 00:00:07
    Flash process done.

    [ --- Flash Main Firmware --- ]
    Flash file: "W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:08:36
    Flash process done.

    [ --- Flash Raw File System --- ]
    Flash file: "W810i_CXC1250324_CentEurope_R4CK003_Brown49.cw81fs"
    Waiting for flash file to load...
    Preparing to program flash...
    Baudrate = 921600Bd
    The applet ignored baudrate change request!
    Programming flash...
    Time: 00:04:03
    Flash process done.

    [ --- Customize File System --- ]
    Sending CS applet...
    The applet ignored baudrate change request!
    Applet ID: 060508 0506 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V26
    Initializing CS applet...
    Applet ID: 060508 0506 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V26
    Baudrate = 921600Bd
    Starting up GDFS service...
    Starting up filesystem, please wait...
    Building customization...
    Customizing phone...
    Done.
    Writing CDA Article MS string...
    Done.
    Writing CDA Version MS string...
    Done.
    Writing Default Article MS string...
    Done.
    Writing Default Version MS string...
    Done.
    Writing langpack string...
    Done.
    Writing country...
    Done.
    Uploading certificates...
    Certificates uploaded successfuly.

    [ --- Shutdown File System --- ]
    Turning off phone...
    GDFS access terminated.
    Phone automatically detached.

    nadal nic:(
  • #19
    BRh+
    Level 13  
    Witam...

    @gw007
    ,a po tej ostatniej kustomizacji robisz Restore Firmware ?
    W logu nie widac.....a bez tego z fona warzywo bedzie.

    Pozdrowienia ....
  • #20
    komismaja
    VIP Meritorious for electroda.pl
    próbowałes tego ??

    Flashing :- Cid49

    1 :- Attach phone
    2 :- Unlock Rsa
    3 :- Remove Battery & put it Again
    4 :- Attach Phone
    5 :- Unlock
    6 :- Flash Fs (Dont Make Customise File System)
    7 :- Flash Main File (No Flashing Error & Now Your Phone is On)
    8 :- Attach Phone & Unlock Rsa
    9 :- Remove Battery & Put it Again
    10 :- Attach Phone Customise File System
    11 :- Attach Phone Restore Firmware



    Unlock :- Cid49

    1 :- Attach phone
    2 :- Unlock Rsa
    3 :- Remove Battery & put it Again
    4 :- Attach Phone
    5 :- Unlock
    6 :- Restore Firmware
  • #21
    Pschemek
    Level 23  
    restrore sie nie robi, przynajmniej u mnie po tym tel sie nie włącza, zaznacz okienko overwrite certifikat, po usuniećiu RSA wgraj
    W810i_CXC1250324_CentEurope_R4CK003_Brown49.cw81fs
    , potem W810i_CXC1250316_Generic_R4CK003_Red49.cw81sw
    customizajcja, finalizacja GDFS (na najmniejszej prędkości) i wstanie
  • #22
    GR8JARO
    Level 14  
    Sorry że się wtrącam, ale czy ktoś próbował zwiększyć napięcie na kabelkach do 9V...???? Gdzieś to wyczytałem i od tej pory (co prawda dopiero 3 szt cid 49 red robilem) nic się nie uwaliło...nie zaszkodzi sprobować...