Canon pixma 170 - jak usunąc komunikat o pełnym pampersie?

Witam
Jak w Canonie Pixma 170 usunąć komunikat o przepełnionym pampersie ?
Pozdrawiam

wymień :Ink absorber kit QY5-0149, zrób reset :<Service mode operation procedures>
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the Power button. (DO
NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Stop/Reset button. (DO NOT release the Power button.)
3) While holding the Power button, press the Stop/Reset button 2 times, and then release both the Power and
Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately,
Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Stop/Reset button the specified number of time(s) according to
the function listed in the table below. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs
light alternately, Alarm in orange and Power in green, starting with Alarm LED.) reset absorwerów:Time(s) LED indication Function Remarks
0 times Green (Power) Power off
1 time Orange Service test print.
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter
resetting



<