Witam
Kolego jak domyślam się to chodzi o sharpa LC32SA1E
Proszę:
[3] Entering and exiting the adjustment process mode
1) Unplug the AC power cord of running TV set to force off the power.
2) While holding down the “VOL(-)” and ”INPUT” keys on the set at once, plug in the AC power cord to turn on
the screen.
3) Next, hold down the ”VOL(-)” and ”P( V)” keys on the set at once.
Multiple lines of orange characters appearing on the screen indicate that the set is now in the adjustment
adjustment process mode (the display is the same as normal startup), retry the procedure.
4) To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the
with the remote controller, once unplug the AC power cord and plug it in again. In this case, wait 10 seconds
5) To remove “K” mode holding down the “VOL (-)” and “INPUT” kyes on the set at once (“K” disappears).
Pozdrawiam
