Hi, i have a Sharp Aquos LC 32DH77E it shows only the green light on stady not Bleeping no red or orange color, seems like turned on but the opc light is off, after some minutes start blinking as stanbay but no picture, i dont know what to do, can someone help me?! Added after 2 [minutes]: i have to add That when i pres the remote too many times for a moment it turns on but when pluged out from the outlet it starts the same problem, leds dont show me any errors like its internal error when make diagnostic boot, any experience on these symptom?
All voltages are 3.3V 5V approximately 1.0V 13.0V 1.1V, its like logic blocked, when i put the firmware it shows filling my memory bank and ends with all OK, after turning off and on no picture only green led light and nothing after some minutes it goes to standby, and try to turn on with remote same prb green loght is on but no picture, friends please i need yours help
All voltages are 3.3V 5V approximately 1.0V 13.0V 1.1V, its like logic blocked, when i put the firmware it shows filling my memory bank and ends with all OK, after turning off and on no picture only green led light and nothing after some minutes it goes to standby, and try to turn on with remote same prb green loght is on but no picture, friends please i need yours help
