logo elektroda
logo elektroda
X
logo elektroda
REKLAMA
REKLAMA
Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Gdzie znaleźć firmware do TCL U40S6806S? TV ciągle się restartuje.

BLANEUR 19 Cze 2018 16:36 2757 7
REKLAMA
  • #1 17285028
    BLANEUR
    Poziom 8  
    Posty: 5
    Ocena: 2
    I have TCL Telivision model u40s6806s witch rebboot all the time that s why i need the firmware.
    Thank you in advance for your help.
  • REKLAMA
  • REKLAMA
  • #3 17286740
    BLANEUR
    Poziom 8  
    Posty: 5
    Ocena: 2
    Thanks for your answer. but the way that you send me did not work for me. cause the tv is rebooting all the time and did not give me the time to access to the configuration in menu.
    can you give me an other way to resolve the problem please.
    thank you so much.
  • REKLAMA
  • #5 17286864
    BLANEUR
    Poziom 8  
    Posty: 5
    Ocena: 2
    download is done

    Dodano po 4 [minuty]:

    can you show me how to fix it
  • REKLAMA
  • #7 17288235
    BLANEUR
    Poziom 8  
    Posty: 5
    Ocena: 2
    The device hangs on the logo only

    Dodano po 6 [godziny] 11 [minuty]:

    is there any other way to do the flash with no menu
  • #8 18311778
    Aquario_blue
    Poziom 19  
    Posty: 277
    Pomógł: 41
    Ocena: 155
    software upgrade by usb
    unzip the file “v8-nt67f0x-lf1vxxx_img_usb”
    please save file ‘update.img’ at the root of the usb drive formatted in fat32 (do not save file
    in any folder)
    put tv on standby
    insert usb drive in ‘usb 2.0’ slot of the tv.
    press and maintain the power button of the keyboard until the software update screen is
    displayed.
    tv will update sw automatically, and shows popup menu to inform the user about the
    ongoing update.
    upgrade will take some time.
    do not switch off, unplug and remove usb drive until upgrade is complete.
    when reflashing is successful, tv should restart automatically after ~5 minutes.
    remove the usb drive from the usb port.
    please delete the file ‘update.img’ from your usb disk to avoid any unwanted software download

    https://www.tcl.eu/en/product-assistance/U40S6806S

Podsumowanie tematu

✨ Użytkownik zgłasza problem z telewizorem TCL U40S6806S, który ciągle się restartuje. W odpowiedzi podano link do pobrania firmware oraz instrukcje dotyczące aktualizacji oprogramowania przez USB. Użytkownik miał trudności z dostępem do menu, co utrudniało rozwiązanie problemu. Ostatecznie zasugerowano, aby rozpakować plik firmware na pendrive, a następnie zaktualizować oprogramowanie, trzymając przycisk zasilania, aż pojawi się ekran aktualizacji. Podano również, aby po zakończeniu aktualizacji usunąć plik 'update.img' z pendrive'a.
Podsumowanie AI na podstawie dyskusji. Może zawierać błędy.
REKLAMA