EPOX EP-8KTA3+ - błąd checksum BIOS po nieudanym flashowaniu, co robić?

Witam, mam problem z płytą epoxa ep-8kta3+, przy flashowaniu biosa wystapil blad i komp zresetował się, teraz po odpaleniu wyswietla takie info:

"Bios Rom checksum error
detecting floppy drive a media
insert system disk and pres Enter".

Wkladam niby odpowiednia dyskietke i nic, probowalem juz z samym awdflash i plikiem .bin, pozniej razem z dyskietka startowa.
Następnie z dyskietka startowa, ale bez plikow autoexec i config
Wyciagalem juz ramy i zostawiałem jedna kosc i cały czas to samo, wyjmowalem baterie, zworki, czyscilem cmos i nic.


Co proponujecie zrobic z tym fantem ??

dzięki za każda pomoc

Witam.
Na jednej ze stron znalazłem taki opis:
"The BIOS can be rolled-back to the last batch of valid settings by pressing "CTRL + Insert" at start-up."

Próbowałeś ten sposób? Jeszcze poszukam co nieco i odezwę się.

Na stronie epoxa znalazłem jeszcze coś takiego:

"The ALT+F2 method may not be available on older mainboards with older BIOS, in such cases it is necessary to carry out the Boot Disk Method.

The ALT+F2 Method:

Download the required BIOS image file from the EPoX website.
Copy or extract the BIOS image file (named xxxxxxxx.bin) to a blank floppy disk with no bad sectors on it.
Restart the machine with the floppy disk in the floppy drive
When prompted at machine initialization, press ALT+F2 to begin performing the flashing of the BIOS.
The BIOS will automatically flash and reboot the machine.
After this, press DEL to enter the BIOS setup and select to "LOAD OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT"
Please note that this does not create a backup of the BIOS binary file.
This does not require you to have a bootable floppy disk. "

Jeszcze jest to:

"The Boot Disk Method from floppy:

1. Create a bootable floppy disk in accordance with the instructions laid out in the manual of your particular operating system. This bootable floppy needs to be able to boot to a DOS console capable of executing normal MS-DOS batch and executable files.

2. Download the required BIOS image file from the EPoX website.

3. Ensure the mainboard is set at LOAD OPTIMIZED DEFAULTS and is not overclocked in any way.

4. Copy to this floppy disk this latest copy of AWDFLASH and also a copy of the BIOS binary image file called xxxxxxxx.bin

5. Insert the diskette into drive A, reboot your system and boot from the diskette.

6. When booting is finished, type awdflash *.bin /cd/cp/cc (* = the name of the BIOS image file)

7. Then press return to run BIOS upgrade program. The BIOS will automatically flash and reboot the machine.

8. After this, press DEL to enter the BIOS setup and select to "LOAD OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT"

9. Please note that this does not create a backup of the BIOS binary file.

10. For Command line help on Award Flash utility, type AWDFLASH /? at the command prompt and press return."

Poniżej masz bios do tej płyty.

Myślę, że sposób z ALT+F2 przyniesie jakieś efekty.