I have washing mashine like AMICA PA 5580B421. Triac z0607ma was burnt. I see 3 elements connected to triac resistor 330 Ω Resistor 10 kΩ and somethyng else of the same size (maybe capasitor?). Do you know what is it? Is it possible to find the schematics of PCBPA 5580B421? Thanks

Welcome on the best polish Forum. You've got on the main board, three elements (about triac): resistor 330Ω, resistor 10kΩ and capasitor 10nF Please, look for: PS. The schematics of theese mashines, You can look here: Best regards.

I'm very sorry, but nobody has scheme of PCB (from this washing machine)... Probably, You've got problem with this part on picture (down). You should change this element in Your washing machine. On PCB change triac ZO607MA, resistors (smd); look for breaks, on the way to µC.

Thanks, in the link that you sent me I didn't find the schematics of PCB itself, only connections and additional scheme where I cannot see all elements (like a capasitor that you mentioned). Do you have full scheme of this PCB? Warm regards, Alex

You are right in every single word Thanks

REKLAMA

Adblock/uBlockOrigin/AdGuard mogą powodować znikanie niektórych postów z powodu nowej reguły.

Elementy przy triaku Z0607MA w pralce AMICA PA 5580B421 - co to jest?

chr17ea 07 Gru 2005 18:23 3312 4

REKLAMA

Zgłoś naruszenie prawa

Odpowiedz | Nowy temat

#1 2062920 07 Gru 2005 18:23

chr17ea chr17ea

Poziom 2

Posty: 3
Autor tematu

Post #1
2062920 07 Gru 2005 18:23

I have washing mashine like AMICA PA 5580B421. Triac z0607ma was burnt. I see 3 elements connected to triac resistor 330 Ω Resistor 10 kΩ and somethyng else of the same size (maybe capasitor?). Do you know what is it? Is it possible to find the schematics of PCBPA 5580B421?
Thanks

REKLAMA
Pomocny post

#2 2063426 07 Gru 2005 20:41

Konto nie istnieje Konto nie istnieje

Poziom 1

Pomocny post
Post #2
2063426 07 Gru 2005 20:41

Welcome on the best polish Forum.
You've got on the main board, three elements (about triac):
resistor 330Ω,
resistor 10kΩ
and capasitor 10nF

Please, look for:
https://www.elektroda.pl/rtvforum/topic291590.html#1458057

PS. The schematics of theese mashines, You can look here:
https://www.elektroda.pl/rtvforum/topic141824-90.html#783406

Best regards.
REKLAMA
#3 2064355 08 Gru 2005 07:24

chr17ea chr17ea

Poziom 2

Posty: 3
Autor tematu Pomocny post? (0)

Post #3
2064355 08 Gru 2005 07:24

Thanks,
in the link that you sent me I didn't find the schematics of PCB itself, only connections and additional scheme where I cannot see all elements (like a capasitor that you mentioned). Do you have full scheme of this PCB?
Warm regards,
Alex
REKLAMA
Pomocny post

#4 2066486 08 Gru 2005 21:10

Konto nie istnieje Konto nie istnieje

Poziom 1
Pomocny post
Post #4
2066486 08 Gru 2005 21:10

Cytat:
Do you have full scheme of this PCB?

I'm very sorry, but nobody has scheme of PCB (from this washing machine)...
Probably, You've got problem with this part on picture (down). You should change this element in Your washing machine. On PCB change triac ZO607MA, resistors (smd); look for breaks, on the way to µC.

Załączniki:

zawór przesterowania.JPG (57.86 KB) Musisz być zalogowany, aby pobrać ten załącznik.
#5 2073054 11 Gru 2005 08:31

chr17ea chr17ea

Poziom 2

Posty: 3
Autor tematu Pomocny post? (0)

Post #5
2073054 11 Gru 2005 08:31

You are right in every single word Thanks
Zarejestruj konto, Zaloguj się i bądź aktywny na forum, a wtedy reklamy nie będą się pojawiać. Dołącz do dyskusji i otrzymaj punkty za rejestrację oraz odpowiedzi.

Zainstaluj aplikację Elektroda

Odpowiedz | Nowy temat

Zgłoś naruszenie prawa

REKLAMA