Czy ktoś podpowie jak sparować panel bezprzewodowy SKYDANCE TW1-4 aby sterować ledami
Czy wolisz polską wersję strony elektroda?
Nie, dziękuję Przekieruj mnie tam
Cytat:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the touch panel.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match.
The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 3 times on the touch panel.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Cytat:
Short press match key (ten przycisk na pilocie, który chcesz z nim sparować), immediately press on/off key on the touch panel.
The LED indicator fast flash a few times means match is successful.
